WhatsApp: +1 209 690 5983

Used 7.3 Powerstroke engine price

Used 7.3 Powerstroke Engine Price: 7 Proven Checks Before You Buy

There is a reason old Ford diesel trucks still sell for good money. The 7.3 Powerstroke has a following that no other Ford diesel can touch. People keep these trucks for twenty years, and when the engine finally gives up, they want another 7.3, not a swap. So the first question we get is always the same: what is the used 7.3 Powerstroke engine price, and how do I know I am getting a good one? This guide answers both.

We sell the 7.3 Powerstroke. NJ Global Auto Parts has tested 7.3L Ford diesel engines on our Ford 7.3 Powerstroke engine for sale page, and we ship worldwide. Our current used 7.3 Powerstroke engine price is $6,800. Send us your VIN and we will match the right engine to your truck, van or Excursion and give you the full price with freight. You can also browse all our Ford engines.

Used 7.3 Powerstroke engine price
Tested 7.3L Powerstroke V8 turbo diesel for Ford trucks, vans and Excursions, shipped worldwide.

Used 7.3 Powerstroke Engine Price at NJ Global Auto Parts

Our used 7.3 Powerstroke engine price right now is $6,800 for a tested engine, marked down from $7,500. Freight is extra and depends on where you are. We give you that number in writing before you pay, so the total is clear from the start.

Every 7.3 we sell is checked. We look at the oil and coolant, check for metal, turn it over by hand and look at compression or run data where we have it. We tell you the mileage and what comes with the engine. Some are complete with the turbo, injectors and high pressure oil pump. Some are long blocks. You will know which one before you buy.

When you shop around, ask each seller what is included, what the mileage is and what the delivered total comes to. A cheap used 7.3 Powerstroke engine price means nothing if the engine shows up missing half its parts.

What Changes the Used 7.3 Powerstroke Engine Price

You will see these engines listed for very different amounts. Here is why the used 7.3 Powerstroke engine price moves around.

Which version it is

The 1994.5 to 1997 engines in the older body trucks are different from the 1999 to 2003 Super Duty engines. The later ones have an intercooler, a different turbo and different injectors. Super Duty engines usually sell for more because there are more trucks that need them.

Forged or powdered metal rods

Earlier 7.3 engines have forged connecting rods. Around mid 2001, Ford switched to powdered metal rods. For a stock truck it does not matter much. For anyone planning to add power, the forged rod engines are worth more, and that shows up in the used 7.3 Powerstroke engine price.

Mileage and condition

These engines are old now. Most have a lot of miles. A clean, well serviced engine with 200,000 miles can be a better buy than a lower mile engine that sat in a field for five years. Condition matters more than the number on the odometer.

How complete it is

A dressed engine with the turbo, injectors, high pressure oil pump and wiring costs more than a bare long block. If your old parts are good, a long block can save money. If not, a complete engine is the cheaper route in the end.

Freight

A 7.3 weighs around 920 pounds dry. Add the crate and you are close to half a ton. Shipping inside one country costs one thing and sea freight overseas costs another. We put freight in the quote so your used 7.3 Powerstroke engine price is the real number.

7.3 Powerstroke Specifications

The 7.3 Powerstroke was built by Navistar, which sold it in its own trucks as the T444E. Ford used it from the middle of the 1994 model year until 2003.

EngineFord 7.3L Power Stroke (Navistar T444E) V8 turbo diesel
Years1994.5 to 2003
Displacement7.3 liters (444 cubic inches)
Configuration90 degree V8, 2 valves per cylinder
Bore x stroke4.11 in x 4.18 in (104.4 mm x 106.2 mm)
Block and headsCast iron
Compression ratio17.5:1
Fuel systemHEUI, hydraulically actuated electronically controlled unit injectors run by engine oil pressure
TurboGarrett TP38 (1994.5 to 1997), Garrett GTP38 with wastegate (1999 to 2003)
IntercoolerNo on 1994.5 to 1997, yes on 1999 to 2003
Power210 hp early, up to 250 hp automatic and 275 hp manual on late trucks
Torque425 lb-ft early, up to 525 lb-ft on late manual trucks
Firing order1-2-7-3-4-5-6-8
Oil capacityAbout 15 quarts with filter
Dry weightAround 920 lb

The HEUI system is the thing that makes the 7.3 different. There is no high pressure fuel pump like a modern diesel. Instead, a high pressure oil pump pushes engine oil to the injectors, and that oil pressure fires the fuel. It is why oil condition matters so much on a 7.3. You can read more on the Navistar International page, the company that designed it, and see where it fits in Ford history on the Power Stroke engine family page.

Vehicles That Use the 7.3 Powerstroke

  • Ford F-250 and F-350, 1994.5 to 1997 (older body style)
  • Ford F-250 and F-350 Super Duty, 1999 to 2003
  • Ford F-450 and F-550 Super Duty, 1999 to 2003
  • Ford Excursion, 2000 to 2003
  • Ford E-Series vans, E-350 and E-450, 1995 to 2003
  • Ford F-Series chassis cab trucks, plus school buses and box trucks built on them

Van engines are not a direct match for pickups. The oil pan, the intake, the turbo position and other parts can be different. If you have an E-Series, tell us. The same goes for the Excursion, which shares most parts with the Super Duty but still needs a quick check. It is one of the things we sort out before we quote you a used 7.3 Powerstroke engine price.

Why People Still Want the 7.3

The 7.3 is simple. It has two valves per cylinder, a cast iron block and heads, and no EGR system or diesel particulate filter. There is not much on it that a good mechanic cannot fix in a driveway.

It is also known for lasting a long time. Plenty of these engines have gone past 400,000 miles with nothing more than oil changes and the odd sensor. It is not the fastest engine and it is not quiet, but it starts, it pulls and it keeps going.

That is why the used 7.3 Powerstroke engine price has held up so well while other old engines get cheaper every year. Supply goes down as trucks get scrapped, and demand stays strong because owners would rather keep a 7.3 truck than buy something new.

Keeping a work truck going

For a business, the math is simple. A paid off Super Duty that earns money every day is worth fixing. Compare the used 7.3 Powerstroke engine price plus labor to five years of payments on a new truck, and the engine wins by a wide margin. In many places you also skip the higher insurance and registration that come with a newer truck.

Downtime is the other cost. A truck parked in the yard is not hauling anything. That is why we try to quote fast and ship fast. If you tell us the truck is down and costing you work, we will tell you honestly how soon we can get an engine to you.

Using a 7.3 in a swap or project

A lot of 7.3 engines go into things Ford never put them in. Older Ford trucks, motorhomes, tractors and off road builds all show up in our inbox. If that is your plan, a complete engine with the harness, the computer and the IDM saves a lot of headaches, even if the used 7.3 Powerstroke engine price is a little higher for a dressed unit.

For a swap, think about the cooling system, the transmission and the room for the turbo. The 7.3 is wide and heavy, so measure before you buy. Tell us what you are building and we will point you to the version that fits best and quote the used 7.3 Powerstroke engine price for that exact setup.

One more tip for project builders. The early forged rod engines are the ones to look for if you want more power later. They cost a bit more, but they handle bigger injectors and tuning much better than the late powdered metal rod engines. For anyone who plans to tune, that difference is worth a few hundred dollars on the used 7.3 Powerstroke engine price.

Common 7.3 Powerstroke Problems

The 7.3 is tough, but it has a few known weak spots. Most are cheap to fix, and many of them get mistaken for a dead engine.

Camshaft position sensor

A failing CPS can make the engine stall or refuse to start with no warning. It is a cheap part. Rule it out before you spend money on an engine.

Injector and IDM problems

Injectors wear, and the injector driver module can fail. You will feel a miss, rough idle or low power. Again, this is not a reason to replace the whole engine.

Under valve cover harness

The UVCH connectors can corrode or come loose, causing misfires. Another cheap fix.

High pressure oil leaks

Leaks in the high pressure oil system cause hard starts, especially when hot. On 1999 to 2003 trucks the STC fitting on the back of the pump is a well known one.

Up pipes and turbo pedestal

Leaking exhaust up pipes and pedestal o-rings are common. You will hear it before you see it.

Real engine failures

When a 7.3 truly dies, it is usually from overheating, a dropped valve, a spun bearing, oil starvation, or a rod that let go. That is when you need to look at the used 7.3 Powerstroke engine price instead of a sensor.

7 Checks Before You Pay the Used 7.3 Powerstroke Engine Price

These are the things we tell every buyer. Do them and you will save money and avoid buying a problem.

  1. Make sure the old engine is really done. Check the CPS, injectors, IDM and oil leaks first. A compression test will tell you a lot.
  2. Match the generation. A 1996 engine and a 2002 engine are not interchangeable without moving parts. Know your year.
  3. Know your rods. If you plan to tune it hard, look for a forged rod engine.
  4. Ask what is included. Turbo, injectors, high pressure oil pump, harness, IDM, sensors. Each one costs money.
  5. Look at the oil. Milky oil or a fuel smell is a red flag on any used 7.3.
  6. Get the delivered price in writing. The used 7.3 Powerstroke engine price should include freight to your door.
  7. Read the warranty. Ours is explained on our used engine warranty page.

Used vs Rebuilt vs Remanufactured 7.3

Used means the engine came out of another vehicle and was tested. It is the lowest cost way to get running again.

Rebuilt means someone took it apart and replaced worn parts. Some rebuilds are excellent and some are not. It depends on who did the work.

Remanufactured means it was rebuilt to factory specs with machining and new parts. A reman 7.3 can cost far more than a used one, and some are hard to find now.

For most trucks, a good used engine at a fair used 7.3 Powerstroke engine price is the best value. Read our breakdown of rebuilt vs used engines if you are still deciding, and our guide to long block vs short block if you are not sure which you need.

Full Cost of a 7.3 Powerstroke Swap

The used 7.3 Powerstroke engine price is the biggest part of the job, but not the only part. Plan for these as well.

Tested used 7.3 engine$6,800 from us
FreightQuoted to your address before you pay
LaborCommonly 12 to 20 hours, depending on the truck and the shop
Gaskets and sealsValve cover, intake, up pipes, turbo pedestal o-rings
FluidsOil, coolant, fuel filter
Cooling partsHoses and thermostats, sometimes a fan clutch

Labor rates change a lot from one place to the next, so get a written quote from your shop. Some shops pull the cab on Super Duty trucks, which takes longer but makes the job easier. Our replacement engine cost guide explains how most shops price engine swaps.

Even with labor added, a used engine keeps a good 7.3 truck on the road for a lot less than buying another truck, and much less than a new one.

How to Match the Right 7.3

Send us your VIN. On these Fords the eighth character is the engine code, and the year tells us whether you have an early or late engine. We also ask whether it is a pickup, a van, a cab and chassis or an Excursion, and whether it has a manual or automatic transmission.

With that, we can match the right engine and give you an exact used 7.3 Powerstroke engine price with everything you need listed.

What You Get From Us

  • A tested engine with known mileage
  • Photos of the actual engine on request
  • A written list of included parts
  • Freight quoted before you pay
  • Secure crating
  • A written warranty
  • Help matching the engine to your VIN

See how we check every engine on our tested used engines page. Our refund and returns page covers what happens if something is wrong.

Shipping a 7.3 Powerstroke Worldwide

We ship worldwide. Inside North America, engines go by freight truck to a business, a terminal or sometimes a home with a liftgate. Overseas, they go by sea in a crate or container. Air freight is possible when you need it fast.

Before it ships, we drain the fluids, seal every opening and strap the engine to a pallet or crate. You get tracking once it leaves. Check import duties with your customs broker before it lands, because those are added on top of the used 7.3 Powerstroke engine price in some countries. Our shipping policy has the details.

Installation Tips for a 7.3

A careful install protects the money you put into the used 7.3 Powerstroke engine price. Most early failures we hear about come down to something skipped during the swap, not the engine itself.

  • Prime the oil system before the first start. The HEUI system needs oil pressure to fire.
  • Check the high pressure oil lines and fittings while you can reach them. Upgrade the STC fitting on later trucks if needed.
  • Replace the CPS with a good quality part. It is cheap insurance.
  • Use new up pipe gaskets or upgraded up pipes.
  • Flush the cooling system and use the right coolant.
  • Clean the fuel tank and replace the filter if the old engine had fuel trouble.
  • Change the oil early after the first few hundred miles.

Need a transmission too? We sell used transmissions, and an engine and transmission combo can lower freight and labor.

Looking After Your 7.3

Oil is everything on a 7.3. The HEUI injectors run on it, so dirty or wrong oil causes rough running and hard starts. Change it on time with a good diesel rated oil, and change it sooner if you tow or idle a lot.

Keep the air filter clean and the intake sealed. Watch the coolant level and temperature. Let the engine warm up before you work it, and let it idle for a minute after a hard pull so the turbo cools.

Do that and the engine you buy today can easily outlast the truck around it. That is what makes the used 7.3 Powerstroke engine price such good value over the long run.

Other Ford Diesel Engines We Sell

For more on this engine, read our 7.3 Powerstroke buying guide. We also carry the Ford 6.0 Powerstroke for 2003 to 2007 trucks and the 6.7 Powerstroke for 2011 and later trucks. If you are pricing the newer engine, see our guide to the 6.7 Powerstroke replacement engine cost.

We also sell the Cummins 6BT, the 6.7 Cummins, Duramax engines like the LB7, and many other used diesel truck engines.

How to Order Your 7.3

  1. Send us your VIN, your country and what happened to the old engine.
  2. We match the engine and send photos, mileage and what is included.
  3. We send the total used 7.3 Powerstroke engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. New to buying engines online? Read how buying a used engine online works.

About our prices

The used 7.3 Powerstroke engine price on this page is what we charge today. Stock changes. A very clean, low mile engine may cost a bit more, and a higher mile one may cost less. We always tell you the mileage and condition of the exact engine you are buying. Tell us your budget and we will show you what fits.

Frequently Asked Questions

What is your used 7.3 Powerstroke engine price?

$6,800 for a tested engine, down from $7,500. Freight is added and confirmed before you pay.

Will a 1997 engine fit my 2001 Super Duty?

Not as a simple swap. The intake, turbo, injectors and other parts changed. Buy from the same generation.

Is a van engine the same as a pickup engine?

The core is the same, but many external parts are different. Tell us what you have.

How long will a used 7.3 last?

With good oil and clean air, many run well past 400,000 miles.

Does it come with the turbo and injectors?

It depends on the unit. We tell you exactly what is fitted before you buy.

Do you ship worldwide?

Yes, by road, sea or air.

How do I pay?

By bank transfer. You get an invoice and order confirmation by email.

Final Word on the Used 7.3 Powerstroke Engine Price

The 7.3 earned its name. A good used one will keep your Ford working for years, and a fair used 7.3 Powerstroke engine price gets you there for much less than a new truck or a reman.

Rule out the cheap fixes first, match the generation, ask what is included, look at the oil and get the delivered price in writing. That is all there is to it.

When you are ready, see our 7.3 Powerstroke engines or send us your VIN, and we will send a straight used 7.3 Powerstroke engine price with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983