The 6.0 has a reputation, and not all of it is fair. Yes, it had head gasket and EGR cooler problems. But a 6.0 that has been sorted out is a strong, quick engine, and the trucks it sits in are still worth keeping. If yours just blew a head gasket for the second time or spun a bearing, you are probably trying to figure out the Ford 6.0 Powerstroke replacement engine cost before you decide what to do next. That is exactly what this guide covers, along with what to check so the next engine does not go the same way.
We sell the 6.0 Powerstroke. NJ Global Auto Parts has tested 6.0L engines on our Ford 6.0 Powerstroke engine for sale page, and we ship worldwide. The Ford 6.0 Powerstroke replacement engine cost with us starts at $5,800 for the engine. Send us your VIN and we will match it to your truck, van or Excursion and give you the delivered price. You can also see all our Ford engines.

Table of Contents
Ford 6.0 Powerstroke Replacement Engine Cost at NJ Global Auto Parts
Our tested used 6.0 sells for $5,800, down from $6,500. That is the engine. Freight depends on where you are, and we confirm it in writing before you pay, so your Ford 6.0 Powerstroke replacement engine cost is clear from the start.
Before an engine leaves us, we check it. We look at the oil and coolant for signs of mixing, which matters a lot on a 6.0. We look for metal, turn it over by hand and check compression or run data where we have it. We tell you the mileage and what is on it. Some come complete with the turbo, injectors, high pressure oil pump and FICM. Some are long blocks.
When you compare sellers, ask the same three questions every time: what is included, what are the miles, and what is the delivered total. That is the only fair way to compare one Ford 6.0 Powerstroke replacement engine cost against another.
What Changes the Ford 6.0 Powerstroke Replacement Engine Cost
Has it been fixed already?
This is the biggest one with a 6.0. An engine that already has head studs, an upgraded oil cooler and a good EGR cooler is worth more than a stock engine. People call this bulletproofing. A bulletproofed engine raises the Ford 6.0 Powerstroke replacement engine cost up front but can save you from doing the work yourself later.
Model year
Early 2003 and 2004 engines had more issues than the 2005 to 2007 engines. Ford made changes to the injectors, the oil cooler and other parts as production went on. Later engines usually sell for a little more.
Mileage and history
Mileage matters, but history matters more on a 6.0. An engine that ran with a clogged oil cooler for a long time may have a tired EGR cooler and stressed head gaskets even if the miles are low.
How complete it is
A complete engine with the turbo, injectors, FICM and harness costs more than a long block. If your old injectors were sticking or your FICM was failing, a complete engine is often the better deal.
Freight
A 6.0 weighs a little under 1,000 pounds. Shipping costs depend on the distance and whether it goes by road or sea. We include it in your Ford 6.0 Powerstroke replacement engine cost quote so there are no surprises.
Ford 6.0 Powerstroke Specifications
Like the 7.3 before it, the 6.0 was built by Navistar, which called it the VT365. Ford used it in Super Duty trucks from the 2003 model year to 2007, and in vans until 2010.
| Engine | Ford 6.0L Power Stroke (Navistar VT365) V8 turbo diesel |
| Years | 2003 to 2007 in Super Duty pickups, 2004 to 2010 in E-Series vans |
| Displacement | 6.0 liters (365 cubic inches) |
| Configuration | 90 degree V8, 4 valves per cylinder |
| Bore x stroke | 3.74 in x 4.13 in (95 mm x 105 mm) |
| Block and heads | Cast iron block, cast iron heads |
| Head bolts | Four per cylinder, torque to yield from the factory |
| Compression ratio | 18.0:1 |
| Fuel system | Second generation HEUI with split shot injectors, run by a 48 volt FICM |
| Turbo | Garrett GT3782VA variable geometry |
| Power | 325 hp |
| Torque | 560 to 570 lb-ft depending on year |
| Firing order | 1-2-7-3-4-5-6-8 |
| Oil capacity | About 15 quarts with filter |
| Transmission pairing | 5R110W TorqShift automatic or ZF6 six speed manual |
The 6.0 was a big step up from the 7.3 in power and in how quickly it revs. It was also much more complex, with an EGR system, a variable geometry turbo and an electronic module just to fire the injectors. For background on the engine family, see the Power Stroke engine history, and for the company that built it, the Navistar International page.
Vehicles That Use the 6.0 Powerstroke
- Ford F-250 and F-350 Super Duty, 2003 to 2007
- Ford F-450 and F-550 Super Duty, 2003 to 2007
- Ford Excursion, 2003 to 2005
- Ford E-350 and E-450 vans and cutaways, 2004 to 2010
Van engines are different on the outside. The turbo, the intake, the oil pan and the wiring do not match a pickup engine. If you have a van or a cutaway with a box or a bus body, tell us up front. It changes what we send and it can change the Ford 6.0 Powerstroke replacement engine cost a little too.
Why a 6.0 Truck Is Still Worth Saving
These trucks have solid frames, strong axles and the same tough body as the later Super Duty trucks. Many of them are paid off and still have plenty of life left. Compare the Ford 6.0 Powerstroke replacement engine cost to the price of a newer diesel truck and the answer is usually obvious.
The 6.0 also responds well once its weak spots are fixed. With head studs, a good oil cooler and a healthy EGR cooler, these engines run hard and last. Plenty of owners who bulletproofed their trucks years ago are still driving them every day.
Signs it is really time for a new engine
Not every sick 6.0 needs a new engine. But some problems point straight there. Coolant in the oil, oil in the coolant that keeps coming back after the cooler was replaced, a knock from the bottom end, low compression on more than one cylinder, or a hydro lock from a failed EGR cooler all mean the block or heads have taken real damage.
If a shop tells you it needs heads, studs, gaskets, an oil cooler, an EGR cooler and injectors all at once, add up their quote. Very often that number is close to or higher than the full Ford 6.0 Powerstroke replacement engine cost with a tested used engine, and the used engine gets you back on the road faster.
Questions to ask your mechanic
- What exactly failed, and how did you confirm it?
- Is the oil cooler clogged, and is the cooling system full of debris?
- Will you install head studs on the replacement?
- Are you pulling the cab or doing it in the truck?
- What parts from my old engine will you reuse?
Good answers to these questions tell you whether the shop knows the 6.0. A shop that does not ask about the cooling system is a shop that might put in a good engine and watch it fail the same way. Get those answers before you lock in your Ford 6.0 Powerstroke replacement engine cost, and you will know the real total instead of a guess.
One more thing. Ask the shop how long they expect the truck to be off the road. For a work truck, two weeks of downtime has a cost too, and it belongs in your Ford 6.0 Powerstroke replacement engine cost planning right next to parts and labor.
Common 6.0 Powerstroke Problems
If you know what fails on a 6.0, you know what to look for on a replacement and what to fix on your truck. That knowledge is the best way to keep the Ford 6.0 Powerstroke replacement engine cost from turning into a repeat bill.
Oil cooler clogging
The oil cooler sits in the valley under the oil filter housing. It clogs with debris from the cooling system. When it clogs, the EGR cooler gets starved of coolant and overheats. Watch the difference between oil temperature and coolant temperature. A gap of more than about 15 degrees F at full warm up points to a clogging cooler.
EGR cooler failure
A failed EGR cooler leaks coolant into the intake or exhaust. You will see white smoke and coolant loss with no outside leak. Left alone, it can lead to a hydro locked engine.
Head gaskets
The factory torque to yield head bolts can stretch, especially when the engine is pushed hard or overheated. That lets the head gaskets leak. Coolant pushing out of the degas bottle is the classic sign. The fix is ARP style head studs.
FICM failure
The FICM supplies 48 volts to the injectors. When it weakens, you get hard starts, misfires and rough running, especially in cold weather. Test the voltage before you condemn the engine.
Injector stiction
Injectors can stick from oil residue, causing rough cold starts. Good oil and an additive often help. It is not a reason to replace the whole engine.
High pressure oil leaks
The STC fitting and the high pressure oil rails can leak, causing no start when hot. Again, a fixable part.
7 Tips to Lower Your Ford 6.0 Powerstroke Replacement Engine Cost
- Make sure it really needs an engine. Test the FICM, check for oil leaks and do a compression or cylinder leak test before you buy.
- Find out why it failed. If the oil cooler clogged and killed the EGR cooler, fix the cooling system or the new engine will go the same way.
- Ask about head studs. An engine that already has them is worth more, and a stock engine should get them during the swap.
- Match the year and body. Pickup, van and Excursion engines differ outside. Early and late engines differ too.
- Know what is included. Turbo, injectors, FICM, high pressure oil pump, harness. These parts change the Ford 6.0 Powerstroke replacement engine cost a lot.
- Get the delivered price in writing. Engine plus freight. Nothing hidden.
- Read the warranty. Ours is on our used engine warranty page.
Bulletproofing: What It Means and What It Costs
You will hear this word a lot with 6.0 engines. It just means fixing the known weak points. A full job usually includes:
- Head studs in place of the factory head bolts
- An upgraded or new oil cooler
- An upgraded EGR cooler, or a new factory one
- A new or upgraded FICM
- A coolant filter kit to keep debris out of the oil cooler
- A fresh water pump and thermostats
Doing these while the engine is out of the truck costs much less in labor than doing them later. If you are budgeting your Ford 6.0 Powerstroke replacement engine cost, add the parts for these upgrades into the plan. It is the difference between a 6.0 you trust and one you worry about.
Used vs Rebuilt vs Remanufactured 6.0
Used means the engine came from another vehicle and was tested. It is the cheapest and quickest option.
Rebuilt means it was taken apart and worn parts were replaced. A good shop rebuild with head studs can be excellent. A cheap one can be a gamble.
Remanufactured means rebuilt to factory spec in a plant. A reman costs much more, and some remans still come with the factory head bolts.
For most owners, a tested used engine plus bulletproofing parts gives the best total Ford 6.0 Powerstroke replacement engine cost. See our guide on rebuilt vs used engines, and read long block vs short block if you are not sure what you need.
The Full Ford 6.0 Powerstroke Replacement Engine Cost
| Tested used 6.0 engine | $5,800 from us |
| Freight | Quoted to your address before you pay |
| Labor | Often 15 to 25 hours, cab off is common on Super Duty trucks |
| Head studs | Strongly recommended if not already fitted |
| Oil cooler and EGR cooler | Worth doing while the engine is out |
| Gaskets, fluids, filters | A few hundred dollars |
Labor rates vary a lot by country and by shop. Ask for a written quote and ask whether they pull the cab. On a 6.0, pulling the cab is normal and makes everything easier, including the bulletproofing work. Our replacement engine cost guide explains how most shops price a job like this.
Even after you add labor and upgrades, the full Ford 6.0 Powerstroke replacement engine cost with a used engine is far less than a newer truck.
How to Match the Right 6.0
Send us your VIN. The eighth character tells us the engine code and the model year tells us whether it is early or late production. We also ask whether it is a pickup, cab and chassis, Excursion or van, and whether it is automatic or manual. That lets us send the right engine and give you an exact Ford 6.0 Powerstroke replacement engine cost.
What You Get From Us
- A tested engine with known mileage
- Photos of the actual engine on request
- A written list of what is included
- Freight quoted before you pay
- Secure crating
- A written warranty
- Help matching the engine to your VIN
See how we test on our tested used engines page and our refund and returns policy. Want lower miles? Look at our low mileage used engines.
Shipping a 6.0 Powerstroke Worldwide
We ship worldwide. In North America, engines go by freight truck to a business or terminal. Overseas they go by sea in a crate or container, or by air when time matters.
We drain the fluids, seal every opening and strap the engine to a crate before it leaves. You get tracking once it ships. Import duty and taxes depend on your country and add to your Ford 6.0 Powerstroke replacement engine cost, so check with your customs broker early. Our shipping policy has the details.
Installation Tips for a 6.0
- Flush the cooling system completely. Old debris is what clogs oil coolers. Use the right coolant and add a coolant filter.
- Install head studs if the engine does not have them.
- Test or replace the FICM. A weak FICM will make a good engine run badly.
- Check the high pressure oil system for leaks before the first start.
- Prime the oil before cranking.
- Use good oil and change it early after the first few hundred miles.
- Watch your temperatures after the swap. Oil and coolant temps should stay close together.
Need a transmission as well? We sell used transmissions, and an engine and transmission combo can cut freight and labor.
Looking After Your 6.0
Keep the coolant clean. That is the number one rule. Change it on schedule with the right type, and keep an eye on the oil and coolant temperature gap with a gauge or a scan tool.
Use a good diesel oil and change it on time. The injectors run on engine oil, so oil quality matters as much as on a 7.3. Keep the fuel filters fresh, and let the engine warm up before you work it hard. Avoid heavy tuning on a stock engine with factory head bolts.
Treat it right and the money you spent on the Ford 6.0 Powerstroke replacement engine cost will go a long way.
Other Ford Diesel Engines We Sell
For more on this engine, read our 6.0 Powerstroke buying guide. We also sell the 7.3, so check the used 7.3 Powerstroke engine price if you have an older truck, and the 6.7 Powerstroke replacement engine cost if you have a 2011 or later truck.
We also stock Duramax LBZ and LMM engines, the 6.7 Cummins and a wide range of used diesel truck engines.
How to Order
- Send us your VIN, your country and what happened to the old engine.
- We match the engine and send photos, mileage and what is included.
- We send the total Ford 6.0 Powerstroke replacement engine cost with freight.
- You pay by bank transfer and get an invoice and order confirmation by email.
- We crate it, ship it and send tracking.
Call +1 (209) 733-0882 or email info@njglobalautoparts.com. If this is your first time, read how buying a used engine online works.
About our prices
The Ford 6.0 Powerstroke replacement engine cost on this page is what we charge today. Stock moves. A low mile or already bulletproofed engine may cost more, and a higher mile one may cost less. We always tell you the mileage and condition of the exact engine. Tell us your budget and we will show you what fits.
Frequently Asked Questions
What is your Ford 6.0 Powerstroke replacement engine cost?
$5,800 for a tested used engine, down from $6,500. Freight is added and confirmed before you pay.
Do your engines have head studs?
Some do and some do not. We tell you exactly what each engine has before you buy.
Will a van engine fit my pickup?
Not without moving a lot of parts. The core is the same, but the turbo, intake and pan are different.
Is a 6.0 reliable after bulletproofing?
Yes. With studs, a good oil cooler, a good EGR cooler and clean coolant, many run for a very long time.
Does it come with the FICM and injectors?
It depends on the unit. We list everything that is fitted.
Do you ship worldwide?
Yes, by road, sea or air.
How do I pay?
By bank transfer. You get an invoice and order confirmation by email.
Final Word on the Ford 6.0 Powerstroke Replacement Engine Cost
A 6.0 truck with a solid body is worth saving. A tested used engine keeps the Ford 6.0 Powerstroke replacement engine cost sensible, and fixing the weak points during the swap means you only pay for it once.
Confirm the engine is really done, find out why, match the year and body style, ask what is included and plan for head studs and coolers. Then get the delivered price in writing.
When you are ready, see our 6.0 Powerstroke engines or send us your VIN, and we will send a straight Ford 6.0 Powerstroke replacement engine cost with shipping to your door.