WhatsApp: +1 209 690 5983

Used Cummins N14 engine price

Used Cummins N14 Engine Price: 7 Proven Tips Before You Buy

Some engines are just loved, and the Cummins N14 is one of them. Drivers who ran one still talk about it. It pulls hard, it sounds right, it is simple to work on, and it does not have the emissions parts that cost so much on newer trucks. If you are checking the used Cummins N14 engine price, you probably have an older Pete, Kenworth or Freightliner that you would rather keep than replace. We can help with that, because we sell N14 engines.

We sell the Cummins N14. NJ Global Auto Parts has tested N14 engines on our Cummins N14 engine for sale page, and we ship worldwide. Our used Cummins N14 engine price today is $7,500, down from $9,000. Send us your engine serial number and we will match the right engine and quote it delivered. You can also see all our Cummins engines.

Used Cummins N14 engine price
Tested Cummins N14 14L inline six diesel truck engine, ready to ship worldwide.

Used Cummins N14 Engine Price at NJ Global Auto Parts

Our used Cummins N14 engine price is $7,500 for a tested engine. Freight is added depending on where the engine is going, and we confirm the full total in writing before you pay.

Every engine is checked before it is listed. We look at the oil and coolant for contamination, look for metal, check for heavy blow by, turn the engine over and go through any run data we have. You get the engine serial number, the CPL number, the miles where we know them and a clear list of what comes with it.

Some engines come complete with the turbo, ECM, compressor and accessories. Some are long blocks. If your old parts are good, a long block saves money. If they are not, a complete engine usually works out cheaper overall.

When you shop around, compare the same things. Serial number, CPL, mechanical or Celect, what is included and the delivered total. A low used Cummins N14 engine price is no bargain if the engine needs a different ECM and harness to run in your truck.

What Changes the Used Cummins N14 Engine Price

Mechanical, Celect or Celect Plus

The N14 came in three main types. Mechanical engines use a PT fuel system with no computer. Celect engines added electronic control. Celect Plus engines, the famous red tops, improved the electronics further. Celect Plus engines in good shape usually bring the highest prices because so many people want them.

Horsepower rating

N14 ratings run from about 310 hp up to 525 hp. Higher ratings usually cost more. On electronic engines, the rating is in the ECM, but the hardware should still suit what you want to run.

Truck or industrial

The N14 also went into industrial, marine and generator work. Those engines often have different oil pans, front covers and flywheel housings. A truck engine for a truck is the easy swap.

Miles and history

Most N14 engines are now 25 years old or more. History matters more than the odometer. An engine that was looked after is worth more than a low mile one that sat outside.

How complete it is

Turbo, ECM, compressor, starter, Jake brake and harness all add value. Count what you can reuse from your old engine.

Freight

A dressed N14 weighs around 2,900 pounds. Shipping it takes proper crating and freight. We include it so the used Cummins N14 engine price you see is the full number.

Cummins N14 Specifications

EngineCummins N14 inline six diesel
YearsAbout 1987 to 2001 in trucks, replaced by the ISX
Displacement14 liters (855 cubic inches)
ConfigurationInline 6, 4 valves per cylinder, camshaft in block with pushrods
Bore x stroke140 mm x 152 mm (5.5 in x 6.0 in)
Fuel systemMechanical PT on early engines, electronic Celect and Celect Plus on later engines
Power rangeAbout 310 to 525 hp
Torque rangeUp to about 1,850 lb-ft depending on rating
Firing order1-5-3-6-2-4
AspirationTurbocharged and aftercooled
Engine brakeJacobs engine brake on many truck engines
Emissions hardwareNo EGR, no DPF, no DEF
Approximate weightAbout 2,900 lb dressed

The N14 came from Cummins’ long running 855 cubic inch family. It kept the simple pushrod layout that mechanics knew well and added electronic control in the Celect years. You can read about the company on the Cummins page.

Look at the last line of the table again. No EGR, no particulate filter, no DEF. That is the main reason the used Cummins N14 engine price has stayed strong for an engine this old.

Mechanical vs Celect vs Celect Plus

Mechanical N14. No computer at all on the fuel system. Easy to work on and easy to keep running almost anywhere in the world. Many owners in remote areas want these for exactly that reason.

Celect. The first electronic N14. It brought better fuel economy and easier tuning. Early Celect wiring can give trouble with age.

Celect Plus. The later electronic version, often with red valve covers, which is where the red top name comes from. Better electronics and the most wanted N14 today.

These three use different fuel systems and wiring. Swapping from one to another is possible, but it adds cost. Match what your truck has and the job stays simple. We always tell you which type an engine is when we quote the used Cummins N14 engine price.

Trucks and Equipment That Use the N14

The N14 was in a huge number of trucks through the 1990s. Common ones include:

  • Peterbilt 379, 377, 378, 375 and 357
  • Kenworth W900, T800, T600 and T2000
  • Freightliner FLD120 and Classic
  • International 9000 series trucks
  • Western Star trucks
  • Volvo and Mack models in some markets
  • Dump trucks, log trucks and heavy haul tractors

Off the road, N14 engines run generators, pumps, mining gear and boats. The outside parts are often different from a truck engine. Tell us what your engine came out of and we will quote the used Cummins N14 engine price for an engine that fits.

Why Owners Still Want the N14

Simple. The N14 is tough, it pulls hard and it is easy to fix. A good mechanic can do most jobs with hand tools. Parts are still easy to find. And with no modern emissions hardware, there is a lot less to go wrong.

Many owners keep an N14 truck because it is paid off and does the job. When the engine finally fails, a tested used engine at a fair used Cummins N14 engine price costs far less than a new truck and gets the old one back to work fast.

N14 or ISX?

The ISX replaced the N14 around 2001. It is a different engine with overhead cams and different mounts and wiring. If your truck had an N14, stay with an N14. Swapping to an ISX is a big job.

Common Cummins N14 Problems

The N14 is strong, but it is old now and has known weak spots. Ask about these before you agree on any used Cummins N14 engine price.

Injector o-rings and fuel leaks

Old o-rings get hard and leak fuel into the oil. Thin, fuel smelling oil is the sign. Fresh o-rings fix it.

Celect wiring harness

The Celect harness can rub through and short with age. Many running problems on electronic N14 engines turn out to be the harness.

Liner cavitation

Weak coolant lets tiny bubbles eat at the outside of the liners. Over time that can cause coolant in the oil. Good coolant and the right additive prevent it.

Oil cooler leaks

A leaking oil cooler can mix oil and coolant. Check it first if you see either in the wrong place.

Overhead adjustment

Valves, injectors and the Jake need setting on schedule. Out of adjustment, the engine loses power and can be damaged.

Worn turbo

Blue smoke, oil in the intake and shaft play point to a tired turbo.

All of these are known problems with known fixes. Knowing them helps you judge whether a used Cummins N14 engine price is fair for the engine in front of you.

7 Tips Before You Pay the Used Cummins N14 Engine Price

1. Get the serial number and CPL

Both are on the data plate on the engine. The CPL tells you exactly how it was built. Send them to us and we will match your truck.

2. Confirm mechanical or electronic

Mechanical, Celect or Celect Plus. Match your truck.

3. Look at the oil and coolant

No milky oil, no fuel smell in the oil, no oil in the coolant and no metal.

4. Ask about blow by

A little is normal on a big diesel. Heavy blow by means worn rings or liners. You can read more about blow by if you are not sure what to look for.

5. Ask for a run video or test results

Seeing it run tells you a lot. We share what we have.

6. Get a list of what is included

Turbo, ECM, compressor, starter, Jake, harness and flywheel. Write it down.

7. Get the delivered price in writing

The used Cummins N14 engine price, plus crating, plus freight. One total before you pay.

See how engines are checked in our guide to tested used engines.

Signs Your N14 Needs Replacing

Make sure the engine is really done before you spend money. These usually mean it is:

  • A deep knock from the bottom end that gets worse under load
  • Coolant in the oil long enough to damage the bearings
  • Heavy blow by with high oil use
  • Low compression on several cylinders
  • Metal in the oil filter
  • A spun bearing, broken crank or cracked block

If you see any of these, get a repair quote and compare it with a tested engine at a fair used Cummins N14 engine price. On an engine this age, replacement often wins. Tell us what your mechanic found and we will give you an honest view.

N14 Engines Outside of Trucks

Not every N14 buyer has a truck. Generator sets, pumps, crushers, boats and mining equipment ran on N14 engines too. Many of those owners want the mechanical version because it can be kept running far from any dealer.

If your engine came out of a machine, send us photos of the front of the engine, the oil pan, the flywheel housing and the data plate. We can often match it, or tell you which parts to move over. That way the used Cummins N14 engine price we quote is for an engine that suits your machine.

Questions to Ask Any Seller

  • What are the serial number and CPL number?
  • Is it mechanical, Celect or Celect Plus?
  • What did it come out of, and why was it removed?
  • Has it been run, and is there a video or test result?
  • What exactly is included?
  • What is the delivered total, with crating and freight?
  • How do I pay, and what paperwork do I get?

A good seller answers all of these clearly. We do, in writing, before you pay.

Is an N14 Still Worth Buying Today?

It is a fair question for an engine that left truck production around 2001. For the right owner, the answer is yes.

If your truck was built for an N14, putting another N14 in is by far the easiest and cheapest way to keep it running. Mounts, wiring, cooling, exhaust and transmission all line up. There is no guesswork.

If you work somewhere with light emissions rules, or far from a dealer, an N14 makes even more sense. Mechanical engines in particular can be fixed by almost any diesel mechanic with ordinary tools. Fuel quality matters less than it does on a modern common rail engine.

Where it makes less sense is if you need to meet strict modern emissions rules, or you want the fuel economy of a newer engine on long highway runs. In that case, look at the ISX15 or another newer engine instead.

For the right truck and the right job, a tested N14 at a fair used Cummins N14 engine price is still one of the best value heavy duty engines you can buy.

Buying a Spare or Several Engines

Some owners with more than one N14 truck like to keep a spare engine ready, so a breakdown costs days instead of weeks. Good N14 engines are getting harder to find, and that is not going to change. If you want two or more, tell us. We can quote them together and ship them together, which often brings the freight cost per engine down.

Used vs Rebuilt vs In-Frame Overhaul

Used engine. Fastest and usually cheapest. A tested engine can be in your truck soon after it arrives.

Rebuilt engine. More money, new wear parts. Good if you plan to keep the truck many more years.

In-frame overhaul. Only works if the block and crank are good.

For most owners, a used engine at a fair used Cummins N14 engine price is the sensible choice. Our post on replacement engine cost has more on this.

The Full Cost of an N14 Swap

  • Labor to pull the old engine and fit the new one
  • Oil, filters, coolant and fuel filters
  • Gaskets and seals for the intake, exhaust and coolant
  • Hoses and clamps
  • Moving parts over from your old engine
  • Setting the overhead and the Jake
  • ECM setup on Celect engines

Add these to the used Cummins N14 engine price and you have the real total. It is still a small part of what a new truck costs.

How to Match the Right N14

Send us:

  • A photo of the data plate with serial and CPL numbers
  • Your truck make, model and year
  • Transmission model
  • Which old parts are still good
  • Your country and nearest port or city

We will match the engine and send an exact used Cummins N14 engine price with freight.

What You Get From Us

  • A tested Cummins N14 with serial and CPL numbers recorded
  • Photos of the actual engine
  • A clear list of what is included
  • Miles where we have them
  • Proper crating
  • Tracking until it arrives
  • Honest answers from people who know engines

Read our refund and returns policy and billing terms before you buy.

Shipping an N14 Worldwide

We ship engines all over the world. Inside the United States, engines go by freight truck. Overseas, we crate the engine and ship by sea, and handle the export paperwork. Air freight is there when you cannot wait.

We add freight to the used Cummins N14 engine price so you see the full cost from the first quote. See our shipping policy for details. Import duties are paid on your side, so check with your customs broker.

Installation Tips for an N14

  • Flush the radiator and cooling system first
  • Fit new oil and fuel filters
  • Prime the oil and fuel systems before the first start
  • Check the aftercooler and pipes for leaks
  • Clean or replace the air filter
  • Check connectors and grounds on Celect engines
  • Set the valves, injectors and Jake
  • Let it idle and check for leaks before loading it

Fix whatever killed the old engine. A bad radiator or torn intake will hurt the next one too.

Looking After Your N14

Change the oil on time with good heavy duty oil. Keep the coolant strong and use the right additive to protect the liners. Keep the air filter clean. Set the overhead on schedule. Keep the Jake brake adjusted. Watch temperatures and oil pressure.

Treat it right and an N14 will pay back the used Cummins N14 engine price many times over.

Other Heavy Duty Engines We Sell

See our Cummins N14 buying guide, the newer Cummins ISX15 and the Cummins M11.

We also sell the Cat 3406E, the Detroit Series 60 14L, the Detroit DD15 and many more used diesel engines. See them all in our shop.

How to Order

  1. Send us the data plate photo, your truck details and your country.
  2. We match the engine and send photos, the serial number, CPL, miles and what is included.
  3. We send the total used Cummins N14 engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. First time buying online? Read how buying a used engine online works.

About our prices

The used Cummins N14 engine price on this page is what we charge today for a tested engine. Stock changes. A clean Celect Plus may cost more and a higher mile engine may cost less. We always tell you the type, miles and condition of the exact engine we quote.

Frequently Asked Questions

What is your used Cummins N14 engine price?

$7,500 for a tested engine, down from $9,000. Freight is added and confirmed before you pay.

Do you have red top Celect Plus engines?

Often, but they sell fast. Ask us what is in stock.

Can I put a Celect engine in a mechanical truck?

Yes, with an ECM, harness and some changes. Matching is easier.

Does it come with the ECM and turbo?

Some do and some are long blocks. We list exactly what is included.

How long will a used N14 last?

Looked after, many keep going for hundreds of thousands of miles more.

Do you ship worldwide?

Yes, by road, sea and air.

How do I pay?

By bank transfer, with an invoice and order confirmation by email.

Final Word on the Used Cummins N14 Engine Price

An old truck with a good frame and a dead N14 is worth saving. A tested engine at a fair used Cummins N14 engine price is the quickest and cheapest way to do it.

Get the serial and CPL numbers. Know if it is mechanical, Celect or Celect Plus. Check the fluids and blow by. Know what is included. Get the delivered total in writing.

When you are ready, see our Cummins N14 engines or send us your data plate photo, and we will send a straight used Cummins N14 engine price with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983