WhatsApp: +1 209 690 5983

Used Cat 3406E engine price

Used Cat 3406E Engine Price: 7 Proven Checks Before You Pay

If you are looking up a used Cat 3406E engine price, chances are you have a Peterbilt or Kenworth sitting in the yard with a dead engine and a truck that is otherwise worth keeping. That is the most common story we hear. The truck is paid off, the cab is good, the frame is straight, and the owner has no interest in a new tractor payment. They want a good 3406E, a fair price and a delivery date. That is what we do.

We sell the Cat 3406E. NJ Global Auto Parts keeps tested Caterpillar 3406E engines on our Caterpillar 3406E engine for sale page and we ship them worldwide. Our used Cat 3406E engine price today is $10,500, down from $12,500. Send us your engine serial number and we will match the right engine and give you a delivered price. You can also look through all our Caterpillar engines.

Used Cat 3406E engine price
Tested Caterpillar 3406E 14.6L inline six diesel truck engine, ready to ship worldwide.

Used Cat 3406E Engine Price at NJ Global Auto Parts

Our used Cat 3406E engine price is $10,500 for a tested truck engine. Freight is added on top, based on where the engine is going, and we put that number in writing before you pay anything.

Every engine gets looked at before it leaves. We pull the oil and look at it. We check the coolant for oil and the oil for coolant. We look for metal, check for heavy blow by, turn the engine over and go through any run or compression numbers we have. You get the serial number, the miles or hours where we know them, and a plain list of what comes with the engine.

Some of our 3406E engines come dressed with the turbo, ECM, air compressor and starter. Some are long blocks. Both have their place. If your old turbo and ECM are fine, a long block saves money. If they are not, a complete engine usually works out cheaper in the end.

A quick word of advice if you are shopping around. Ask every seller for the serial number, what is included and the delivered total. A low used Cat 3406E engine price means nothing if the engine shows up with the wrong ECM, missing parts or a serial prefix that does not fit your truck.

What Changes the Used Cat 3406E Engine Price

Two 3406E engines can look the same on a pallet and still be a few thousand dollars apart. Here is why.

Truck engine or industrial engine

The 3406E was built for trucks, but Caterpillar also used it in industrial, generator and marine work. Those engines often have a different oil pan, front housing, flywheel housing and wiring. A truck engine going into a truck is a straight swap. That is why a clean truck engine tends to sit at the higher end of the used Cat 3406E engine price range.

40 pin or 70 pin ECM

Early 3406E engines use a 40 pin ECM. Later ones use a 70 pin ECM. The truck harness has to match. You can convert, but it costs time and parts. We always tell you which one the engine has.

Horsepower rating

Truck ratings run from about 355 hp up to 550 hp and higher on some engines. A high horsepower rating usually costs more. The rating lives in the software, so it can sometimes be changed, but the injectors, turbo and other hardware should suit what you want to run.

Miles and history

Lower miles cost more. That is fair. But an engine with records and a few more miles is often a better buy than a low mile engine that sat in a field for six years with water in it. Records are worth paying for, and they are part of what you get for the used Cat 3406E engine price.

How complete it is

A dressed engine costs more than a long block. Count up what your old engine is missing before you compare prices.

Freight

A dressed 3406E weighs close to 3,000 pounds. That takes a truck, a crate and sometimes a container. We add freight to every quote so the used Cat 3406E engine price you see is the price you pay.

Caterpillar 3406E Specifications

EngineCaterpillar 3406E inline six diesel
On-highway yearsAbout 1993 to 1999, followed by the C15
Displacement14.6 liters (893 cubic inches)
ConfigurationInline 6, 4 valves per cylinder, overhead camshaft
Bore x stroke137.2 mm x 165.1 mm (5.4 in x 6.5 in)
Fuel systemElectronic unit injectors (EUI), cam driven
Engine controlElectronic ECM, 40 pin on early engines and 70 pin on later engines
Truck power rangeAbout 355 to 550 hp, with some ratings higher
Truck torque rangeUp to about 1,850 lb-ft depending on rating
Firing order1-5-3-6-2-4
AspirationTurbocharged and air to air aftercooled
Approximate dry weightAbout 2,800 to 3,000 lb dressed
Emissions hardwareNo EGR, no DPF, no DEF

The 3406E was Caterpillar’s big step from mechanical fuel systems to electronic control. It kept the size and pulling power the older 3406 engines were known for and added electronic unit injectors and an overhead cam. You can read how that injection setup works on the unit injector page, and more about the company on the Caterpillar Inc. page.

The most important line in that table for a lot of buyers is the last one. No EGR, no particulate filter and no DEF. That is a big part of why the 3406E still sells, and why the used Cat 3406E engine price has held up the way it has.

Trucks and Equipment That Use the 3406E

The 3406E went into a lot of Class 8 trucks in the 1990s. Common ones include:

  • Peterbilt 379, 377, 378 and 375
  • Kenworth W900, T800, T600 and T2000
  • Freightliner FLD120 and Classic
  • International 9000 series trucks
  • Western Star trucks
  • Dump trucks, log trucks and heavy haul tractors

Off the road, you will find 3406E engines in generator sets, pumps, earthmoving gear and boats. The core engine is close, but the outside parts are not. Tell us exactly what your engine came out of and we will quote the used Cat 3406E engine price for an engine that actually fits.

Why the 3406E Is Still in Demand

Talk to anyone who has run one and you will hear the same things. It pulls hard. It does not mind heavy loads. It is simple to work on compared to newer engines. And it has none of the emissions hardware that eats money on modern trucks.

Many owner operators keep a 379 or a W900 on the road on purpose. The truck is paid for. Parts are easy to find. A good mechanic can keep it running without a laptop full of dealer software. When the engine finally gives up, putting in another 3406E makes more sense than buying a new truck.

That demand is also why prices have not dropped much over the years. Good truck engines get bought up quickly. If you find a tested one at a fair used Cat 3406E engine price, do not sit on it too long.

3406E or C15, which one do you need?

The C15 came after the 3406E and the early C15 engines are close relatives. Some parts carry over and some do not. If your truck had a 3406E, the cleanest swap is another 3406E with the same ECM type. If you are thinking about a different engine, look at our Caterpillar C15 page first, then talk to us.

Common Cat 3406E Problems

The 3406E has a strong name, but every engine has weak spots. These are the ones we look for, and the ones you should ask about before you pay any used Cat 3406E engine price.

Injector cups and coolant in the fuel

The injectors sit in sleeves that are surrounded by coolant. When a sleeve or seal leaks, coolant can get into the fuel or combustion gas can get into the cooling system. Look for coolant loss with no visible leak and bubbles in the coolant tank.

Head gasket and head issues on high ratings

Engines that were turned up and worked hard for years can show head gasket trouble. A pressure test and a look at the coolant tell you a lot.

Front crank seal and oil leaks

Common on high mile engines. Not a big job, but it is good to know before the engine goes in.

Oil cooler

A leaking oil cooler can mix oil and coolant. If you see either one in the wrong place, check the cooler first.

Wiring and ECM connections

Many 3406E engines are close to 30 years old. Wiring gets brittle and connectors corrode. A lot of “bad engine” calls turn out to be a harness problem.

Worn turbo

Blue smoke, oil in the intake and shaft play all point to a worn turbo. It is an easy part to replace, but price it in.

None of these should scare you off. They are known problems with known fixes. Just know about them before you agree on a used Cat 3406E engine price.

7 Checks Before You Pay the Used Cat 3406E Engine Price

1. Get the serial number and arrangement number

The serial number is on the data plate on the side of the block. The first letters, called the prefix, tell you a lot about the engine. Common truck prefixes include 1LW and 5EK. The arrangement number tells you how the engine was built. Send us both and we will match truck to truck.

2. Ask which ECM it has

40 pin or 70 pin. Your harness has to match. This one detail causes more headaches than anything else on a 3406E swap.

3. Look at the oil and coolant

Clean oil with no milkiness. Coolant with no oil film. No metal on the dipstick or in the pan. Simple checks, and they tell you a lot.

4. Ask about blow by

Heavy blow by from the breather means worn rings or liners. A little is normal on a diesel this size. A lot is not.

5. Get run data if you can

A run video, a compression test or ECM data all help. We share what we have on each engine.

6. Get a list of what is included

Turbo, ECM, compressor, starter, alternator, fan hub, flywheel. Each missing part has a cost. Write it down so there are no surprises.

7. Get the delivered price in writing

The used Cat 3406E engine price, plus crating, plus freight to your door or port. One number, in writing, before you pay.

If you want to learn more about how engines are checked before they ship, read our guide on tested used engines.

Used vs Rebuilt vs In-Frame Overhaul

When a 3406E fails, you have three real choices.

Used engine. The fastest and usually the cheapest way back on the road. A tested used engine at a fair used Cat 3406E engine price can be in your truck within days of arriving.

Rebuilt engine. A good rebuild with new liners, pistons, bearings and gaskets costs more. It makes sense if you plan to keep the truck for many years and want a fresh start.

In-frame overhaul. Your shop rebuilds the bottom end while the engine stays in the truck. This only works if the block and crank are good. If the engine threw a rod or cracked the block, it is off the table.

For most owners with a working truck and a dead engine, a used engine is the practical answer. Our article on replacement engine cost goes deeper into the numbers.

The Full Cost of a 3406E Swap

The engine is the biggest part of the bill, but it is not the whole bill. Plan for these as well:

  • Labor to pull the old engine and fit the new one
  • New oil, filters, coolant and fuel filters
  • Gaskets and seals for the exhaust, intake and coolant connections
  • Hoses and clamps that are past their best
  • Moving over parts from your old engine
  • Setting up the ECM to your truck

Add all of that to the used Cat 3406E engine price and you have the real figure. Even with everything counted, it is a small fraction of what a new truck costs.

How to Match the Right 3406E

Getting the right engine the first time saves money and downtime. Send us:

  • A clear photo of the engine data plate
  • The truck make, model and year
  • The transmission model
  • Whether your old ECM, turbo and compressor are good
  • Your country and the nearest port or city

With that, we can find the right engine and give you an exact used Cat 3406E engine price with freight included.

What You Get From Us

  • A tested Caterpillar 3406E with the serial number recorded
  • Photos of the engine you are buying
  • A clear list of what is included
  • Miles or hours where we have them
  • Secure crating for shipping
  • Tracking from our dock to your door or port
  • Straight answers from people who know engines

All of that is part of the used Cat 3406E engine price we quote. Nothing is held back to be added later.

Our refund and returns policy and billing terms are on the site for you to read before you buy.

Shipping a 3406E Worldwide

We ship engines all over the world. Inside the United States, engines usually go by freight truck. For buyers overseas, we ship by sea in a crate or container and handle the export paperwork on our end. Air freight is possible when the job cannot wait, but it costs more.

Freight depends on distance, the shipping method and whether you want it delivered to your door or picked up at the port. We quote it with the used Cat 3406E engine price so you know the full cost from day one. Full details are on our shipping policy page.

Check your own country’s import rules and duties before you order. Your customs broker can tell you what to expect. Duties are paid on your side and are not part of the used Cat 3406E engine price.

Installation Tips for a 3406E

A good install protects your money. A few things we tell every customer:

  • Flush the cooling system and radiator before the new engine goes in
  • Replace the oil and fuel filters, even if the engine came with new ones
  • Prime the fuel system and oil system before the first start
  • Check the aftercooler and charge air pipes for leaks and dirt
  • Clean or replace the air filter and check the intake for debris
  • Check the harness connectors and grounds
  • Let it idle and check for leaks before you load it

If the old engine failed from overheating, find the cause first. A blocked radiator or bad fan clutch will hurt the next engine too. If it failed from dust, fix the air intake.

Looking After Your 3406E

Treat it right and a 3406E will keep pulling for a long time. Change the oil on time with a good heavy duty oil. Keep the coolant at the right strength and use the right additive to protect the liners. Keep the air filter clean. Watch your temperatures and oil pressure.

If your truck has a Jake brake, keep it adjusted. You can read how a compression release engine brake works if you are new to it. Set the valves and injectors on schedule. Looked after this way, the engine you buy will pay back the used Cat 3406E engine price many times over. Small jobs done on time stop big repairs later.

Other Heavy Duty Engines We Sell

If your truck needs something else, we carry a range of big bore diesels. See the Caterpillar 3406E buying guide, the Caterpillar C13 and our used Cat C13 price guide.

We also sell the Cummins N14, the Cummins ISX15, the Detroit Series 60 14L and the Detroit DD15, plus many other used diesel engines. Browse everything in our shop.

How to Order

  1. Send us a photo of the engine data plate, your truck details and your country.
  2. We match the engine and send photos, the serial number, miles and what is included.
  3. We send you the total used Cat 3406E engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. Never bought an engine online before? Read how buying a used engine online works.

About our prices

The used Cat 3406E engine price on this page is what we charge today for a tested truck engine. Stock moves. A low mile engine may cost more and a higher mile one may cost less. We always tell you the miles, the condition and what is included on the exact engine we quote. Tell us your budget and we will show you what fits it.

Frequently Asked Questions

What is your used Cat 3406E engine price?

$10,500 for a tested truck engine, down from $12,500. Freight is added and confirmed in writing before you pay.

Will a 3406E from a different truck fit mine?

Often yes, but check the serial prefix, the ECM pin count and the arrangement. Send us your data plate and we will confirm.

Can I use an industrial 3406E in my truck?

It can be done, but expect to change the oil pan, front parts and wiring. A truck engine is usually the better deal.

Does it come with the ECM and turbo?

Some do and some are long blocks. We tell you exactly what is included on each engine.

How long will a used 3406E last?

With clean oil, clean air and normal care, many keep going for hundreds of thousands of miles more.

Do you ship worldwide?

Yes, by road and sea, and by air when the job cannot wait.

How do I pay?

By bank transfer. You get an invoice and order confirmation by email.

Final Word on the Used Cat 3406E Engine Price

A 3406E truck in good shape is worth keeping. A tested engine at a fair used Cat 3406E engine price is the quickest and cheapest way to keep it working.

Get the serial and arrangement numbers. Check the ECM type. Look at the fluids. Ask about blow by. Get a list of what is included. Get the delivered price in writing. Do that and you will not go far wrong.

When you are ready, see our Caterpillar 3406E engines or send us a photo of your data plate, and we will come back with a straight used Cat 3406E engine price and shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983