WhatsApp: +1 209 690 5983

Used Cummins ISX15 engine price

Used Cummins ISX15 Engine Price: 7 Proven Checks Before You Pay

The ISX15 is the engine a lot of drivers think of when they hear the word Cummins. It is in Peterbilts, Kenworths, Freightliners and Internationals all over the world, and it has pulled more heavy loads than anyone could count. When one fails, the question is not whether to keep the truck. It is where to find a good engine and what it costs. If you are checking the used Cummins ISX15 engine price, you are in the right place, because we sell them.

We sell the Cummins ISX15. NJ Global Auto Parts has tested ISX15 engines on our Cummins ISX15 engine for sale page, and we ship worldwide. Our used Cummins ISX15 engine price today is $12,500, down from $14,500. Send us your engine serial number and we will match the engine to your truck and quote it delivered. You can also see all our Cummins engines.

Used Cummins ISX15 engine price
Tested Cummins ISX15 15L inline six diesel truck engine, shipped worldwide.

Used Cummins ISX15 Engine Price at NJ Global Auto Parts

Our used Cummins ISX15 engine price is $12,500 for a tested engine. Freight goes on top, depending on where the engine is headed, and we put the full figure in writing before you pay.

Before any engine is listed, we check it. We look at the oil and coolant for contamination, look for metal, check for heavy blow by, turn the engine over and go through any run data or fault codes we have. You get the serial number, the CPL number, the miles where we know them and a straight list of what comes with it.

Some engines come with the turbo, ECM, compressor and most accessories. Some are long blocks. Aftertreatment parts like the DPF and SCR are usually separate, and we will tell you plainly what is and is not included.

When you shop around, compare the same things on every engine. Serial number, CPL, fuel system type, ECM type, what is included and the delivered total. A low used Cummins ISX15 engine price means very little if the engine has the wrong fuel system for your truck.

What Changes the Used Cummins ISX15 Engine Price

Year and emissions level

The ISX family was built to several emissions rules. Engines from the early 2000s, 2004 to 2006, 2007 to 2009, 2010 to 2012 and 2013 on each have different hardware. Newer engines usually cost more. Your truck needs the same emissions level it was built with.

Fuel system

Engines up to 2009 use the HPI-TP fuel system. Engines from 2010 on use the XPI common rail system. They are very different and do not swap easily. This one detail matters more than almost anything else when you compare a used Cummins ISX15 engine price from one seller to another.

Horsepower rating

Ratings run from about 400 hp up to 600 hp. Higher ratings usually cost more. Torque goes up to about 2,050 lb-ft on the top ratings.

Miles and history

Lower miles cost more. But a well kept engine with records and more miles can be a better buy than a lower mile engine that was abused or sat for years.

How complete it is

A dressed engine with turbo, ECM, compressor, starter and harness costs more than a long block. Count up what your old engine has that you can reuse.

Freight

A dressed ISX15 weighs over 3,000 pounds. Moving it costs real money, especially across an ocean. We include freight so the used Cummins ISX15 engine price you see is the full total.

Cummins ISX15 Specifications

EngineCummins ISX15 inline six diesel
YearsAbout 2002 to 2017, replaced by the Cummins X15
Displacement15 liters (912 cubic inches)
ConfigurationInline 6, 4 valves per cylinder, overhead cam
Bore x stroke137 mm x 169 mm (5.39 in x 6.65 in)
Fuel systemHPI-TP up to 2009, XPI common rail from 2010
Engine controlCM870, CM871, CM2250 or CM2350 depending on year
Power rangeAbout 400 to 600 hp
Torque rangeAbout 1,450 to 2,050 lb-ft
Firing order1-5-3-6-2-4
AspirationVariable geometry turbo on most engines, charge air cooled
Engine brakeCummins Intebrake on many engines
EmissionsEGR from the early 2000s, DPF from 2007, SCR with DEF from 2010
Approximate weightAbout 3,100 lb dressed

The ISX took over from the N14 as Cummins’ top heavy duty engine. Over the years it picked up EGR, a particulate filter and then SCR to meet emissions rules, and the fuel system changed from HPI-TP to XPI common rail. More history is on the Cummins ISX page. Most ISX15 engines use a variable geometry turbocharger, which is one of the parts worth checking on any used engine.

HPI-TP vs XPI, Know Which One You Have

If you take one thing from this page, take this. The ISX15 changed its whole fuel system in 2010.

HPI-TP engines (up to 2009) use a dual overhead cam layout with one camshaft working the injectors. Many owners like these engines. They are proven and do not use DEF.

XPI engines (2010 and later) use a high pressure common rail system with a single overhead cam. They are cleaner and more fuel efficient, and they work with SCR and DEF.

The two use different heads, fuel pumps, injectors, wiring and ECMs. Putting one in place of the other is a big job. Match what your truck has and the swap is simple. We always tell you which fuel system an engine has when we quote the used Cummins ISX15 engine price.

Trucks That Use the ISX15

The ISX15 was offered by almost every heavy truck maker. Common ones include:

  • Peterbilt 379, 386, 387, 388, 389, 579 and 587
  • Kenworth W900, T660, T680, T800 and T880
  • Freightliner Cascadia, Coronado and Columbia
  • International ProStar, LoneStar and 9900i
  • Western Star 4900 and 5700XE
  • Volvo VN trucks from the 2000s
  • Heavy haul, logging, tanker and dump trucks

Each truck brand used its own wiring and mounting details. Tell us exactly what truck you have and we will quote the used Cummins ISX15 engine price for an engine that fits it.

The ISX15 earned its name. It makes big power, pulls hard at low rpm and handles heavy loads well. Mechanics everywhere know it, and parts are easy to find. Plenty of them go past a million miles with a rebuild along the way.

Lots of owners keep their trucks well past the payment years. A paid off 389 or W900 with a failed engine is still a valuable truck. A tested engine at a fair used Cummins ISX15 engine price costs a small part of what a new tractor costs and gets the truck back to work in days.

ISX15 or X15?

The X15 replaced the ISX15 from 2017. It is a different engine in many details, with different software and wiring. If your truck had an ISX15, stay with an ISX15 of the same year group.

Common Cummins ISX15 Problems

Every engine has weak spots. These are the ones we look for, and you should ask about them before you agree on any used Cummins ISX15 engine price.

EGR valve and cooler

The EGR valve can stick and the cooler can leak coolant. Coolant loss with no outside leak, white smoke and EGR codes are the usual signs.

Turbo actuator

The VGT actuator is a common failure. It sets codes and cuts power. A worn turbo shows blue smoke and oil in the intake.

Fuel system on XPI engines

Common rail pumps and injectors hate dirty fuel and water. Keep the filters fresh and drain the water separator often.

DPF and DOC clogging

Lots of idle and short runs fill the filter. You can read how a diesel particulate filter works if you want the background.

Oil leaks

Front cover, rear seal and rocker housing leaks are common on high mile engines. Not a big deal, but worth knowing about.

Sensors and wiring

Sensors and connectors fail with age. Many faults that look like a bad engine turn out to be a cheap sensor.

None of this should put you off. These are known problems with known fixes. Know them before you agree on a used Cummins ISX15 engine price.

7 Checks Before You Pay the Used Cummins ISX15 Engine Price

1. Get the serial number and CPL

Both are on the engine data plate on the front gear housing. The CPL number tells you how the engine was built. Send them to us and we will match your truck.

2. Confirm the fuel system and ECM

HPI-TP or XPI. CM870, CM871, CM2250 or CM2350. Match your truck.

3. Look at the oil and coolant

No milky oil, no oil film on the coolant and no metal.

4. Ask about blow by

Heavy blow by means worn rings or liners.

5. Ask for run data or fault codes

A run video, fault history or ECM data all help. We share what we have.

6. Get a list of what is included

Turbo, ECM, compressor, starter, harness, flywheel, fan hub. Know what you need to move over.

7. Get the delivered price in writing

The used Cummins ISX15 engine price, plus crating, plus freight. One number, in writing, before you pay.

Read more about how engines are checked in our guide to tested used engines.

Signs Your ISX15 Needs Replacing

Before you spend money, make sure your engine is really done. These signs usually mean it is:

  • A deep knock from the bottom end, worse under load
  • Coolant in the oil long enough to hurt the bearings
  • Heavy blow by and high oil use
  • Low compression on several cylinders
  • Metal in the oil filter
  • A spun bearing, broken crank or cracked block

If you see these, get a repair quote and compare it with a tested engine at a fair used Cummins ISX15 engine price. On a high mile engine, replacement usually wins once labor and downtime are counted. Tell us what your mechanic found and we will give you a straight answer.

Software and Setup

The ISX15 is computer controlled, so the ECM has to be set up for your truck. That includes the rating, road speed settings, transmission and other vehicle details. Many shops can do this with Cummins software. Plan for it in your budget. It is small next to the used Cummins ISX15 engine price, but skip it and the truck may not run right.

Older or Newer ISX15, Which Is the Better Buy?

We get asked this a lot, and the honest answer is that it depends on your truck and where it works.

If your truck was built before 2010, the answer is simple. Buy a pre-2010 engine that matches it. The older HPI-TP engines have a loyal following, they do not use DEF, and in many parts of the world they are easier to keep running because the emissions rules are lighter. A good one is often cheaper too.

If your truck was built in 2010 or later, buy an XPI engine from the same year group. These engines are more fuel efficient, and over a year of long haul work the fuel savings add up to real money. They do need clean fuel and a working aftertreatment system, so factor that in.

Where people get into trouble is trying to save a little on the used Cummins ISX15 engine price by buying the wrong year group, then spending far more on parts, wiring and labor to make it fit. Match the truck. It is almost always the cheaper path in the end.

Questions to Ask Any Seller

Wherever you buy, ask these and get the answers in writing:

  • What are the serial number and CPL number?
  • What year group is it, and which fuel system does it use?
  • Which ECM is on it, CM870, CM871, CM2250 or CM2350?
  • What truck did it come out of, and why?
  • Has it been run, and is there a video or test data?
  • What exactly is included?
  • What is the delivered total, with crating and freight?
  • How do I pay, and what paperwork comes with the order?

A good seller answers these quickly and clearly. If the answers are vague, be careful no matter how low the price looks. We answer every one of these before you pay.

Used vs Rebuilt vs In-Frame Overhaul

Used engine. Quickest and usually cheapest. A tested engine can be working in your truck soon after it arrives.

Rebuilt engine. More money, but new wear parts. Good if you plan to keep the truck many years.

In-frame overhaul. Only possible if the block and crank are good.

For most owners, a used engine at a fair used Cummins ISX15 engine price makes the most sense. Our post on replacement engine cost goes deeper.

The Full Cost of an ISX15 Swap

  • Labor to remove the old engine and fit the new one
  • Oil, filters, coolant and fuel filters
  • Gaskets and seals for the intake, exhaust and coolant
  • Hoses and clamps
  • Moving parts over from the old engine
  • ECM setup and programming
  • Cleaning the aftertreatment if the old engine fouled it

Add these to the used Cummins ISX15 engine price and you have your true total. It is still a small part of the cost of a new truck.

How to Match the Right ISX15

Send us:

  • A photo of the engine data plate with serial and CPL numbers
  • Your truck make, model, year and VIN
  • Transmission model
  • Which of your old parts are good
  • Your country and nearest port or city

We will match the engine and send you an exact used Cummins ISX15 engine price with freight.

Buying for a Fleet

If you run several ISX15 trucks, a spare engine on the shelf can save you a lot of downtime. We can quote two or more engines together and ship them together, which often brings the freight per engine down. Tell us how many you need, the year groups and where they are going.

What You Get From Us

  • A tested Cummins ISX15 with serial and CPL numbers recorded
  • Photos of the actual engine
  • A clear list of what is included
  • Miles where we have them
  • Proper crating
  • Tracking until it arrives
  • Honest answers from people who know engines

Before you buy, read our refund and returns policy and billing terms.

Shipping an ISX15 Worldwide

We ship engines around the world. Inside the United States, engines go by freight truck. Overseas, we crate the engine and ship by sea, and handle the export paperwork. Air freight is available when time matters most.

We add freight to the used Cummins ISX15 engine price so the full cost is clear from the first quote. See our shipping policy for more. Import duties are paid on your side, so check with your customs broker.

Installation Tips for an ISX15

  • Flush the radiator and cooling system first
  • Fit new oil and fuel filters and drain the water separator
  • Prime the fuel and oil systems before the first start
  • Check the charge air cooler and pipes for oil and leaks
  • Inspect and clean the DPF and DOC if needed
  • Check connectors and grounds
  • Set up the ECM for your truck
  • Let it idle and check for leaks before loading it

Fix whatever killed the last engine first. A bad cooling system or dirty fuel will hurt the next one too.

Looking After Your ISX15

Use the correct heavy duty oil and change it on time. Keep the coolant right. Change fuel filters on schedule and drain water often. Keep idle time down. Let the truck finish its regens. Watch temperatures and oil pressure.

Treat it right and the engine will pay back the used Cummins ISX15 engine price many times over.

Other Heavy Duty Engines We Sell

See our Cummins ISX15 buying guide, or the older Cummins N14 and Cummins M11.

We also sell the Detroit DD15, the Detroit Series 60 14L, the Cat 3406E, the Cat C13 and many more used diesel engines. See them all in our shop.

How to Order

  1. Send us the data plate photo, your truck details and your country.
  2. We match the engine and send photos, the serial number, CPL, miles and what is included.
  3. We send the total used Cummins ISX15 engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. First time buying an engine online? Read how buying a used engine online works.

About our prices

The used Cummins ISX15 engine price on this page is what we charge today for a tested engine. Stock changes. A newer or lower mile engine may cost more and an older one may cost less. We always tell you the year, fuel system, miles and condition of the exact engine we quote.

Frequently Asked Questions

What is your used Cummins ISX15 engine price?

$12,500 for a tested engine, down from $14,500. Freight is added and confirmed before you pay.

Can I put a 2010 ISX15 in a 2008 truck?

Not as a simple swap. The fuel system, ECM and emissions hardware are different. Match the year group.

Does it come with the DPF and SCR?

Usually not. We tell you exactly what is included.

Will I need programming?

Yes, the ECM needs to be set up for your truck.

How long will a used ISX15 last?

Looked after, many go well past a million miles in total.

Do you ship worldwide?

Yes, by road, sea and air.

How do I pay?

By bank transfer. You get an invoice and order confirmation by email.

Final Word on the Used Cummins ISX15 Engine Price

A good truck with a failed ISX15 is worth saving. A tested engine at a fair used Cummins ISX15 engine price is the fastest way to get it earning again.

Get the serial and CPL numbers. Know the fuel system and ECM. Check the fluids and blow by. Know what is included. Plan for setup. Get the delivered total in writing.

When you are ready, see our Cummins ISX15 engines or send us your data plate photo, and we will send a straight used Cummins ISX15 engine price with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983