WhatsApp: +1 209 690 5983

Used Cummins M11 engine price

Used Cummins M11 Engine Price: 7 Proven Checks Before You Pay

If you run a truck, a fire engine or a big piece of equipment with a Cummins M11 in it and that engine has just let go, the first thing on your mind is money. How much is a good replacement going to cost, and how do you avoid paying for someone else’s problem? This guide answers the used Cummins M11 engine price question straight, then covers the specs, the versions, the problems to look for and how to buy one safely from anywhere in the world.

We sell the Cummins M11. NJ Global Auto Parts has tested used M11 diesel engines on our Cummins M11 engine for sale page, and we ship worldwide. Send us your engine serial number, CPL number or truck details and we will match the right engine and give you the full used Cummins M11 engine price with delivery to your country. You can also see all our Cummins engines.

Used Cummins M11 engine price
Used Cummins M11 10.8L diesel engine, tested and shipped worldwide.

Used Cummins M11 Engine Price at NJ Global Auto Parts

Our used Cummins M11 engine price is $7,500 for a complete, tested engine. That is the price on the product page today.

What does that get you? A complete running takeout, not a bare block. The engine is checked before it is listed, we send you photos and a run video, and we match the CPL to your truck or machine so the brackets, sump and fuel setup line up.

Out in the open market, used M11 engines sell anywhere from about $3,500 to over $10,000. The cheap ones are often missing the ECM, have unknown history or are sold as cores. The expensive ones are usually mechanical M11C industrial engines or fresh rebuilds. Our used Cummins M11 engine price sits in the middle because we sell complete, checked engines, and we would rather you buy once than twice.

What Affects the Used Cummins M11 Engine Price

Two M11 engines from the same year can be thousands apart. Here is why.

Celect, Celect Plus or mechanical

The M11 came with different fuel controls. Early mechanical engines, Celect electronic engines from the mid 1990s, and Celect Plus engines from around 1996 onwards. Celect Plus engines are the most common in trucks and usually the easiest to sell. Mechanical M11C industrial engines are hard to find and often cost more.

Horsepower rating and CPL

Ratings run from about 280 hp to 400 hp. Higher ratings usually mean bigger injectors and a different turbo. The CPL number on the data plate tells you exactly what parts the engine was built with, and it matters a lot to the used Cummins M11 engine price.

ECM included or not

A Celect Plus engine with its ECM is worth more than one without. If you have a working ECM from your old engine, you may be able to use it, but the programming has to suit the new engine.

Jake brake

Engines with an engine brake fitted are worth more to truck buyers. If you run in hilly country, you want one.

Mileage and condition

Low miles, good oil pressure, clean oil and no blow-by all push the price up. Signs of overheating or fuel in the oil push it down.

Where it is shipping

An M11 is heavy. Freight to your country is part of the real cost. We always quote the used Cummins M11 engine price with delivery so you can compare properly.

Cummins M11 Specifications

Before you compare any used Cummins M11 engine price, check that you are comparing the same engine. These are the main M11 specs.

Engine typeInline 6-cylinder, 4-stroke diesel
Displacement10.8 L (661 cu in)
Bore x stroke125 mm x 147 mm (4.92 in x 5.79 in)
Valves4 per cylinder (24 valves), operated through crossheads
Fuel systemCummins unit injectors driven off the camshaft, mechanical (STC) or electronic (Celect, Celect Plus)
AspirationTurbocharged, charge air cooled
PowerAbout 280 to 400 hp depending on rating
TorqueUp to about 1,450 lb-ft
Rated speed1,800 to 2,100 rpm depending on rating
Firing order1-5-3-6-2-4
WeightRoughly 850 to 950 kg dressed, depending on accessories
Oil capacityAround 38 litres (10 US gallons) on most truck sumps
ProductionMid 1990s to early 2000s in trucks, later in industrial M11C and QSM11 form

The M11 replaced the Cummins L10 and was later followed by the ISM and QSM11. It shares a lot of its basic layout with those engines, which helps with parts. You can read more about the company and its engine families on the Cummins engines page and on Wikipedia’s Cummins article.

M11 Celect vs Celect Plus vs M11C

This is where a lot of orders go wrong, so it is worth a minute.

  • M11 Celect – early electronic engine. Uses the original Celect ECM and wiring. Fewer of these around now.
  • M11 Celect Plus – the later electronic engine and the one most trucks have. Different ECM and harness from the Celect. The two are not plug and play with each other.
  • M11C – the industrial and construction version. Often mechanical with an electric or mechanical governor. Found in haul trucks, loaders, cranes and combines.
  • M11-G – generator version, set up to run at fixed speed.

The easy way to avoid mistakes is to send us a clear photo of your data plate. With the CPL and serial number we can tell you which version you need and give you the correct used Cummins M11 engine price for it.

Trucks and Machines That Use the M11

The M11 was a popular choice for trucks that needed more than a medium-duty engine but did not need a 14 or 15 litre. You will find it in:

  • Freightliner FLD, Century Class and FL series
  • Kenworth T800, T600 and W900
  • Peterbilt 357, 375, 377, 379 and 385
  • International 9000 series, 2600 series and Paystar
  • Volvo WG, WX Xpeditor and VN
  • Western Star trucks
  • Fire trucks from KME, Spartan, E-One, Pierce and others
  • Construction haul trucks, loaders, graders and cranes (M11C)
  • Farm combines and large tractors
  • Generators using the M11-G

Dump trucks, mixers, logging trucks and regional haulers are where we see the most M11 demand.

Why the M11 Is Still Worth Buying

The M11 is not new, so why pay the used Cummins M11 engine price instead of moving to something newer?

It is simpler than modern engines. No EGR, no DPF, no DEF system on the original truck engines. That means fewer sensors, fewer parts to fail and lower running costs, especially in places where ultra-low sulphur diesel is hard to get.

It is strong. The M11 makes big torque for its size and pulls well in the middle of the rev range, which is where trucks spend most of their time.

Parts are easy to get. Gaskets, injectors, turbos and overhaul kits are still made and still cheap compared to newer engines.

And it fits your truck. Putting another M11 back in an M11 truck is far cheaper than repowering with a different engine, new mounts, new wiring and new cooling.

Common M11 Problems to Check

Every engine has its weak spots. These are the ones we look for on the M11 before we put a used Cummins M11 engine price on it.

Injector o-ring and cup leaks

Worn o-rings on the unit injectors can let fuel get into the oil. Thin, fuel-smelling oil is the sign. It is a known job and not hard to fix, but you want to know about it before you buy.

Overhead adjustment

The valves and injectors need setting at service intervals. Engines that missed this can run rough, smoke or lose power. It is a routine job, not a failure.

ECM and harness faults

Celect and Celect Plus engines can have wiring or ECM problems, often from age, heat or poor repairs. Check the codes and look at the harness.

Cracked heads after overheating

An M11 that has been run hot can crack the head between the valve seats. Look for coolant in the oil, white smoke and pressure in the cooling system.

Oil leaks

Rocker housing, front cover and oil cooler leaks are common on older engines. Most are gasket jobs.

Turbo wear

Check for shaft play and oil in the intake pipe. A tired turbo is cheaper to fix than most people think, but it should be part of the price talk.

7 Checks Before You Pay a Used Cummins M11 Engine Price

Use these whether you buy from us or anyone else.

  1. Match the CPL and serial. Get a clear photo of the data plate and check it against your truck.
  2. Ask for a run video. Cold start, idle, and a few revs. Watch for smoke and listen for knocks.
  3. Get the oil pressure. A healthy M11 shows good pressure hot and cold. Ask for the number.
  4. Check the oil and coolant. No fuel smell in the oil, no oil in the coolant, no milky oil.
  5. Check for blow-by. Light vapour is fine. Heavy smoke pouring from the breather is not.
  6. Confirm what is included. ECM, turbo, starter, alternator, air compressor, jake brake, flywheel and housing all change the used Cummins M11 engine price.
  7. Get the delivered price in writing. Engine, packing and freight on one invoice.

Our guide to tested used engines goes deeper into what a proper test should include.

What You Get With Our M11 Engines

When you pay our used Cummins M11 engine price, this is what comes with it:

  • A complete engine checked before listing
  • Photos and a run video of the actual engine you are buying
  • Data plate photo so you can check the CPL yourself
  • Help matching the engine to your truck or machine
  • Fluids drained, openings sealed, engine packed on a strong pallet or crate
  • Clear invoice listing what is included
  • Support from our team after delivery

If the engine arrives damaged, or a real defect in the engine shows up after a correct install, our refund and returns policy covers you for 30 days. Read our used engine warranty guide to see what records to keep.

Used vs Rebuilt M11: Which Makes More Sense?

A rebuild on an M11 is a big job. Liners or pistons, rings, bearings, a head, injectors, gaskets, machine work and a lot of labour. Many shops quote well above our used Cummins M11 engine price once everything is counted, and the truck is off the road for weeks.

A good used engine gets you working again in days. You can keep your old engine as a core to rebuild later or sell.

Rebuilding makes sense if your block and crank are good, you have a shop you trust, and the truck can sit for a while. Buying used makes sense if downtime costs you money or the block is damaged. Our rebuilt vs used engine guide and our remanufactured vs rebuilt guide help with the decision.

Shipping an M11 Worldwide

We ship M11 engines to customers across North America, Central and South America, the Caribbean, Europe, Africa, the Middle East, Asia, Australia and the Pacific islands.

Most M11 engines go by sea freight in a crate or on a pallet. We drain the fluids, cap every opening and strap the engine down so it does not move. Once it is on its way, you get tracking and the shipping documents your customs broker will need.

If you already work with a freight forwarder, we can deliver to their warehouse. Our shipping policy covers the basics, and we always include freight in the used Cummins M11 engine price we send you.

Installing Your Replacement M11

A good engine can be ruined by a rushed swap. Here is what we tell every customer.

  • Find out why the old engine failed. If it overheated, fix the cooling system first. If it ran out of oil, find the leak.
  • Clean or replace the radiator and charge air cooler. Debris from a failed engine can sit in them and go straight into the new one.
  • Use new filters. Oil, fuel and coolant filters, and a new air filter.
  • Prime the oil system. Fill with fresh 15W-40 heavy-duty diesel oil and crank with the fuel off until you have pressure.
  • Check the overhead. Set the valves and injectors to spec before the first start.
  • Match the ECM. Celect and Celect Plus are different. Make sure the ECM and programming suit the engine and the truck.
  • Bring it up to temperature slowly. Check for leaks, recheck fluids, and change the oil after the first few thousand km.

If your transmission is also tired, an engine and transmission combo can save you a second job later.

Running Costs After You Pay the Used Cummins M11 Engine Price

The used Cummins M11 engine price is the start. Here is what it costs to keep one going.

Fuel use is reasonable for its size. In regional haul and vocational work, the M11 is often more fuel-efficient than larger engines that are working less hard.

Servicing is straightforward. Oil and filter changes at the interval for your work, overhead adjustments at the right mileage, and clean fuel. Many owners do much of this themselves.

Parts are still widely made. Injectors, gaskets, water pumps and overhaul kits are not hard to find, and many are cheaper than the same parts for newer engines with emissions equipment.

Buying More Than One M11 for a Fleet

Some of our customers run several trucks or machines with the same engine. If that is you, it pays to think beyond the one engine that just failed.

When one M11 in a fleet goes, others of the same age are often not far behind. Buying a spare engine now, while you are already arranging freight, can cut your shipping cost per engine and save you from a second rush order later. A spare sitting on a stand in your yard turns a three-week breakdown into a two-day swap.

Tell us how many engines you run, the CPL numbers and the work they do. We can look at matching engines, ship them together in one container, and give you a used Cummins M11 engine price per unit that reflects the bigger order.

Fleet owners also ask us about keeping records. Write down the serial number, CPL, date fitted and mileage at fitting for every engine you buy. Keep the invoice and the run video. If anything ever goes wrong, those records make warranty claims and future resale far easier.

It also helps to standardise. If you have a mix of Celect and Celect Plus trucks, moving them all to Celect Plus over time means one type of ECM, one set of wiring and one set of spare parts on the shelf. That is less to stock and less for your mechanics to remember. When you ask us for a used Cummins M11 engine price, mention this and we can help you plan it.

Other Heavy-Duty Engines We Sell

If the M11 is not quite right for your job, take a look at these:

Or browse all our used diesel truck engines.

How to Order Your M11

  1. Contact us with your data plate photo, truck or machine details, and your country.
  2. We confirm the right engine and send the full used Cummins M11 engine price with freight.
  3. We send photos and video of the engine.
  4. You pay by bank transfer and receive an invoice and order confirmation by email.
  5. We pack and ship, then send tracking and documents.

You can also call +1 (209) 733-0882 or email info@njglobalautoparts.com.

Frequently Asked Questions

What is your used Cummins M11 engine price?

$7,500 for a complete, tested engine. We add freight to your country and confirm everything in writing before you pay.

Does the engine come with the ECM?

Tell us what you need. We will confirm whether the engine includes an ECM and whether your existing one can be used.

Can I put a Celect Plus engine in a Celect truck?

It can be done, but the ECM and wiring have to change to suit. It is easier to buy the same version you already have.

Is the M11 the same as the ISM?

The ISM is the later version with a newer fuel system and electronics. They are related but not a straight swap without changes.

How many miles will a used M11 go?

Well-maintained M11 engines often reach 800,000 km or more before major work. How the engine was treated matters more than the number on the clock.

Do you ship to my country?

Yes. We ship worldwide by sea or air freight.

How do I pay?

By bank transfer, with an invoice and order confirmation sent by email.

Final Word on the Used Cummins M11 Engine Price

The M11 is a solid, simple heavy-duty diesel that still earns its keep in trucks and machines all over the world. A fair used Cummins M11 engine price gets you a working engine that fits straight back into your truck, without the cost and downtime of a full rebuild or a repower.

Check the CPL, check the oil and pressure, get a run video and get the delivered price in writing. Do that and you will buy well.

When you are ready, see our Cummins M11 engines or send us your details, and we will give you a clear used Cummins M11 engine price shipped to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983