A used engine and transmission combo for sale makes a lot of sense when the whole driveline is tired, when you are doing a swap, or when you just do not want the headache of making an engine from one place work with a gearbox from somewhere else. You get two parts that already ran together in the same vehicle, with the same bolt pattern, the same flywheel or flexplate and usually the same wiring logic.
We sell engine and gearbox sets. See our used engine and transmission combo for sale product page for the price and details. NJ Global Auto Parts offers a used engine and transmission combo for sale for many Toyota, Nissan, Honda, Mazda, GM and Ram applications, from JDM swap packages to heavy diesel truck drivelines. Send your VIN or tell us your project and we will quote a matched set with freight to your country. You can also look through our used engines and transmissions.
Here we cover why buying both together pays off, the most popular combos with their specs, what is included, what to check, prices, shipping, and how to get the swap done without a pile of leftover problems.

Table of Contents
Why Buy a Used Engine and Transmission Combo for Sale?
Plenty of people buy an engine on its own and find out later the gearbox was half dead too. Then the vehicle comes apart a second time. A combo avoids that, and there are more reasons.
They are known to work together. Bell housing, input shaft, torque converter or clutch, starter position, mounts: all of it was matched at the factory.
One set of labour. Most engines and gearboxes come out together anyway. Replacing both at once means you pay for the job once.
Better for swaps. If you are putting a different engine in a project car, a used engine and transmission combo for sale gives you a starting point that bolts together. You only need to sort the mounts, the shafts and the wiring to your chassis.
Electronics line up. On modern vehicles, the engine and transmission computers talk to each other. Parts from the same donor are far less likely to throw mismatch codes.
Often better value. Buying the pair from one donor usually costs less than buying them separately from two sellers, and you pay for freight once.
Popular Combos and Their Specs
These are the matched sets people ask us about most. Availability changes, so ask us which used engine and transmission combo for sale is in stock today.
| Engine | Layout | Typical gearbox | Common donors |
|---|---|---|---|
| Toyota 2JZ-GTE | 3.0L inline 6, twin turbo petrol | 6-speed manual or automatic | Supra, Aristo |
| Toyota 1JZ-GTE | 2.5L inline 6, turbo petrol | R154 5-speed manual or automatic | Chaser, Mark II, Soarer |
| Honda K20A | 2.0L inline 4, i-VTEC petrol | 6-speed manual | Civic Type R, Integra Type R, Accord Euro R |
| Nissan SR20DET | 2.0L inline 4, turbo petrol | 5-speed manual | Silvia, 180SX |
| Mazda 13B | 1.3L twin rotor, turbo or NA | 5-speed manual | RX-7 |
| Toyota 1HD-FTE | 4.2L inline 6, turbo diesel | H151F 5-speed manual or automatic | Land Cruiser 100 |
| Duramax LBZ | 6.6L V8, turbo diesel | Allison 1000 6-speed | Silverado and Sierra HD |
| 6.7 Cummins | 6.7L inline 6, turbo diesel | 68RFE 6-speed | Ram 2500 and 3500 |
| Toyota 1GR-FE | 4.0L V6 petrol | A750F 5-speed automatic | Prado, 4Runner, Hilux, FJ Cruiser |
Each of these has its own page or guide on our site. For the gearbox side, see our H151F, A750F, Allison 1000 and 68RFE guides.
What Comes in a Used Engine and Transmission Combo for Sale
“Combo” means different things to different sellers, so it pays to ask. When we quote a used engine and transmission combo for sale, we spell out what is included. A typical set from us has:
- Complete engine, usually with intake, injectors or fuel rail and exhaust manifolds
- Matching transmission, bolted or packed with the engine
- Flywheel and clutch on manuals, or flexplate and torque converter on automatics, where the donor had them
- Starter and alternator on many units (we confirm per set)
- Engine wiring harness and ECU on many JDM swap sets
- Photos and video before payment
Things that normally stay with the donor or vary: radiator, AC compressor, power steering pump, airbox, intercooler piping, axles, propshaft and mounts. If you need any of these, ask and we will see what we can add.
7 Checks Before You Buy
These are the same checks we run on our own stock. Ask any seller to show you the same.
- Confirm the codes. Engine code and transmission code, read off the block and the tag, not just the listing title.
- Compression or leak-down test on the engine. Cylinders should be even. On rotaries, ask for a rotary-specific compression reading.
- Look inside the oil filler and under the valve cover if you can. Sludge or milky oil is a warning.
- Transmission fluid or gear oil. Clean, normal smell, no heavy metal on the magnet.
- Turn both by hand. The engine should rotate smoothly. The gearbox should shift into every gear on the bench.
- Check the housings. No cracks in the block, sump, bell housing or gearbox case.
- Ask about the donor. Mileage, why it was scrapped, and whether it was running when it came out.
A seller who has nothing to hide will happily send compression numbers and photos of a used engine and transmission combo for sale.
Matching the Combo to Your Vehicle
For a direct replacement, matching is mostly about the VIN. Give us the VIN and we compare engine code, gearbox code, drive type and model year to the donor.
For a swap into a different car, it gets more involved. Think about:
- Engine mounts and crossmember. Will you use swap mounts, modify brackets, or fabricate?
- Transmission tunnel and crossmember. Bigger gearboxes need room.
- Propshaft or axles. Length, yoke and flange will almost always change on rear drive swaps. Front drive swaps need the right axles for the gearbox.
- Shifter location. On manuals, the lever has to come up somewhere sensible.
- Clutch hydraulics. Master cylinder size and slave type.
- Speedometer signal from the gearbox to your dash.
- Wiring and ECU. Factory harness, a standalone ECU, or a swap harness.
- Cooling and fuel. Radiator size, fan control, fuel pump and lines.
If this sounds like a lot, it is. The reason people still do swaps is that a used engine and transmission combo for sale is a big step forward compared with trying to marry an engine and gearbox that were never meant to meet. A useful primer on the overall idea is this article on the engine swap.
JDM Swap Sets
Japanese domestic market sets are a big part of the combo market. Japanese vehicles often come off the road with fairly low mileage, and the engines and gearboxes are pulled out together as front clips or drop-in packages. That is how people get hold of 2JZ, 1JZ, SR20, K20 and 13B setups to build Silvias, Civics, RX-7s and all sorts of projects.
If that is what you are after, read our full guide to JDM engines for sale. It covers the popular engines in more depth. A JDM used engine and transmission combo for sale usually includes the ECU and harness, which makes the swap much easier.
Diesel Truck Drivelines
On the heavy truck side, the classic pairings are Duramax with the Allison 1000, 6.7 Cummins with the 68RFE, and the Land Cruiser 1HD-FTE with the H151F or an automatic. When a work truck has a big failure, sometimes both the engine and gearbox are worn out from towing and hours.
Buying a used engine and transmission combo for sale for a diesel truck lets you put the whole drivetrain back to a known state. Read our used diesel engine article, or look at the Duramax LML, Duramax LMM and 6.7 Powerstroke pages.
Manual or Automatic Combo?
If your vehicle came with one type, stick with it unless you have a good reason to change. Swapping between manual and automatic adds pedals, wiring, computer changes and sometimes a different propshaft.
For project cars it is a different story. Many people building a drift car or a track car want a manual, even if the donor engine came out of an automatic luxury sedan. In that case you either look for a used engine and transmission combo for sale that already has the manual, or buy the engine alone and source a manual gearbox, bell housing and clutch to suit.
Automatic sets make sense for daily drivers, heavy towing and diesel trucks, where a good automatic like the Allison 1000 or A750F does the job well and is easier on the driver. Manual sets suit off-road builds, light trucks in remote areas and anyone who likes simple, repairable parts.
Tell us what you are building and we will suggest a used engine and transmission combo for sale that fits the job, not just the engine bay.
Pairing Tips for Common Swaps
Some quick notes from projects we have supplied. A 2JZ-GTE set with the six speed manual is the classic big power swap, but the gearbox is expensive on its own, so a used engine and transmission combo for sale is often the better deal. SR20DET sets with the five speed suit lighter cars. K20A sets suit front drive Hondas and are popular in other light cars with the right mounts and axles. For diesel trucks, keep the factory pairing where you can, because the gearbox is matched to the torque.
Whatever you build, check that the used engine and transmission combo for sale includes the parts you will struggle to find later, like the ECU, harness, flywheel and shifter. A complete used engine and transmission combo for sale saves a lot of hunting down the track.
When You Only Need One Part
A combo is not always the right answer. If the gearbox shifts well and the engine has a spun bearing, an engine alone may be all you need. Same in reverse: if the engine runs perfectly and the automatic is slipping, buy the gearbox.
Some quick ways to decide:
- Is the vehicle high mileage and both parts original? A combo often makes sense.
- Did one part fail in a way that damaged the other? For example, a transmission that broke and sent metal into a shared cooler, or an engine that over-revved after a missed shift. Consider both.
- Are you changing engine type? Then you need the matching gearbox anyway.
- Is one part fairly new or recently rebuilt? Keep it and buy the other.
If you only need the gearbox, our used transmissions for sale guide is the place to start.
How We Check Every Used Engine and Transmission Combo for Sale
People sometimes ask what “checked” actually means. Fair question. This is what happens to a used engine and transmission combo for sale before we list it:
- Codes and numbers recorded. We note the engine code, gearbox code and any tags, and photograph them.
- Compression test. Each cylinder, or each rotor face on a rotary. We want even readings.
- Oil and coolant look. Drained oil should not be milky or full of glitter. Coolant passages should not be full of rust or sludge.
- Turn over by hand. The engine should rotate with no binding or knocking.
- Gearbox on the bench. Shift through every gear, spin the shafts, check the fluid and magnet.
- Visual on the outside. Cracks, broken bolts, damaged sensors, cut wiring.
- Photos and video taken for the customer.
We cannot see inside every bearing without taking the set apart, and nobody selling used parts honestly can. What we can do is check what tells you the most and share it before you pay.
A Real Example: Land Cruiser 100 Series
Here is a kind of job we see often. A customer runs a Land Cruiser 100 Series with the 1HD-FTE and the H151F manual for remote site work. At around 450,000 km the engine starts using oil and blowing smoke, and the gearbox has been whining for a year and popping out of second.
He could buy an engine, fit it, and live with the gearbox until it fails, then pull everything apart again. Instead he orders a used engine and transmission combo for sale from one donor truck: 1HD-FTE plus H151F. His mechanic pulls both, fits the matched set with a new clutch, flushes the radiator, replaces hoses and belts, and the truck is back at work the same week.
Two separate jobs would have meant twice the labour and two lots of downtime. That is the case for a combo in a nutshell.
Questions to Ask Before Ordering
Before you order any used engine and transmission combo for sale, from us or anyone, get answers to these:
- Do both units come from the same donor?
- What was the donor mileage, and was it running?
- Can I see compression figures and photos of the codes?
- What exactly is included: ECU, harness, starter, alternator, flywheel, converter?
- How is it packed, and how will it ship to my country?
- What happens if a part does not match my vehicle?
- Who do I talk to after it arrives?
Clear answers mean the seller knows the product. Vague answers mean you should keep looking.
Budget Checklist for a Swap
The price of the used engine and transmission combo for sale is only part of the cost of a swap. Before you commit, add up the rest so there are no shocks halfway through:
- Engine and gearbox mounts, or a swap mount kit
- Propshaft shortening or new axles
- Clutch kit, flywheel resurfacing, or a new converter
- Wiring harness work, ECU or standalone, and tuning time
- Radiator, hoses, fans and coolant
- Fuel pump, lines and filter if the new engine needs more fuel or pressure
- Exhaust adapting or a new system
- Intercooler piping on turbo engines
- Fluids, filters, belts, plugs and gaskets
- Labour if you are not doing it yourself
- Inspection or registration costs in your country
On a straight replacement in the same model, most of this list disappears, which is why direct replacements are so much cheaper than swaps.
Used Engine and Transmission Combo for Sale: Prices
Price depends a lot on the engine. A common four cylinder set is a very different price from a 2JZ-GTE twin turbo set or a Duramax and Allison pair. Other things that move the price:
- Mileage and condition of the donor
- How complete the set is (ECU, harness, accessories)
- Manual or automatic
- Demand for that engine in the swap world
- Shipping weight and destination
We quote the full price with freight before you pay. Payment is by bank transfer, with an invoice and order confirmation by email. Details are in our billing terms.
Shipping a Combo Worldwide
An engine and gearbox together are heavy and awkward, so packing matters. We drain the fluids, cap every opening, protect sensors and connectors, and bolt the set to a pallet or crate. It is wrapped against dust and water, and labelled with your details.
Most combos travel by sea freight because of the weight. Smaller sets can go by air if you are in a hurry and the budget allows. We provide the documents for customs. Read our shipping policy for more.
When it arrives, look at the crate before you sign. If something is broken, take photos and note it with the carrier straight away.
Fitting Tips That Save Headaches
Whether it is a direct replacement or a swap, these steps make a big difference to how long your used engine and transmission combo for sale lasts:
- Change the engine oil and filter before first start, even if the oil looks clean.
- Replace the timing belt and water pump on belt engines unless you have proof it was done.
- Fit new spark plugs or check injectors on diesels.
- Replace the clutch kit on manuals, or check the torque converter on automatics.
- Replace the rear main seal and front crank seal while everything is accessible.
- Flush or replace the radiator and transmission cooler.
- Use new coolant, gear oil or ATF to the factory spec.
- Prime the oil system before first start by cranking without fuel or spark.
- Check for leaks, codes and temperatures on the first runs.
- Drive gently for the first few hundred km, then change the oil again.
It sounds like a long list, but it is cheap compared with taking your used engine and transmission combo for sale out again.
Mistakes We See People Make
After years of selling engines and gearboxes, the same mistakes come up. Avoid these:
- Buying on price alone. The cheapest used engine and transmission combo for sale online often has no history and no photos.
- Not checking codes. A similar looking engine from a different market can have different sensors and mounts.
- Reusing old fluids, hoses or a blocked radiator. The new engine overheats and gets blamed.
- Skipping the cooler flush on automatics. Old debris goes straight into the replacement box.
- Forgetting the wiring. Especially on swaps. Plan the harness and ECU before the engine arrives.
- Revving it hard on day one. Let it settle in first.
Why Buy From NJ Global Auto Parts
We buy, check and sell engines and gearboxes ourselves. When you ask about a used engine and transmission combo for sale, you talk to people who handle these units every day.
- Every set is checked before we list it
- We match it to your VIN or your swap plan
- You see photos and video before paying
- We pack properly and ship worldwide
- Clear invoices and order confirmation
Read more about us, see our refund and returns policy, or browse the full shop. If you want to know more about how engines and gearboxes work together, this overview of the powertrain is a good read.
Frequently Asked Questions
Does the combo come from the same vehicle?
Yes, when we sell a used engine and transmission combo for sale, both units come from the same donor unless we tell you otherwise on the quote.
Is the ECU included?
On many JDM swap sets, yes. On direct replacements you often reuse your own. We confirm per set.
Can I get a manual combo for a car that was automatic?
Yes, but you will need pedals, a clutch master cylinder, a different propshaft or axles and often wiring changes. We can help you plan it.
Are the engine and gearbox tested?
We do compression checks on engines and check gearboxes by hand and by fluid inspection. Where the donor was running, we note it.
Do you ship worldwide?
Yes, to most countries, mainly by sea freight for full sets.
How do I pay?
By bank transfer. You get an invoice and order confirmation by email. Call +1 (209) 733-0882 with questions.
Get Your Matched Set
Doing both at once saves labour, avoids mismatched parts and gets the vehicle back to a known state. A checked used engine and transmission combo for sale is the simplest way to do it. Send us your VIN or swap plan and where you are, and we will quote the used engine and transmission combo for sale that fits, shipping included.