WhatsApp: +1 209 690 5983

Cummins ISL replacement engine cost

Cummins ISL Replacement Engine Cost: 7 Proven Ways to Save

The Cummins ISL is one of those engines that turns up everywhere once you start looking. Freightliner M2 box trucks, school buses, city buses, refuse trucks, fire trucks and a huge number of diesel pusher motorhomes. When one fails, the owner usually has two questions. Can it be fixed, and if not, what is the Cummins ISL replacement engine cost? This page answers the second one with a real number, and walks through what else you will spend so there are no surprises.

We sell the Cummins ISL. NJ Global Auto Parts keeps tested ISL engines on our Cummins ISL engine for sale page, and we ship worldwide. The Cummins ISL replacement engine cost with us is $7,900 for the engine, down from $9,500. Send us your engine serial number and we will match the right engine and quote it delivered. You can also see all our Cummins engines.

Cummins ISL replacement engine cost
Tested Cummins ISL 8.9L inline six diesel for trucks, buses and motorhomes, shipped worldwide.

Cummins ISL Replacement Engine Cost at NJ Global Auto Parts

Our Cummins ISL replacement engine cost is $7,900 for a tested engine. Freight is added depending on where it is going, and we send you the full figure in writing before you pay anything.

Each engine is checked before we list it. We look at the oil and coolant for contamination, look for metal, check for heavy blow by, turn the engine over and go through any run data or fault codes we have. You get the serial number, the CPL number, the miles where we know them and a plain list of what comes with it.

Some engines come with the turbo, ECM and most accessories. Some are long blocks. Aftertreatment parts like the DPF and SCR unit are normally separate. We tell you straight what is and is not included.

If you are comparing sellers, compare the same things. Serial number, CPL, year group, ECM, what is included and the delivered total. A low Cummins ISL replacement engine cost is not low at all if the engine is from the wrong year group and your shop spends a week making it fit.

What Goes Into the Cummins ISL Replacement Engine Cost

The engine is the biggest number, but it is not the only one. When people say the job cost more than they expected, it is nearly always because of the extras. Here is the whole picture.

The engine itself

A tested used ISL from us is $7,900. A rebuilt or new engine costs a lot more. Most owners with a working vehicle and a dead engine go with a tested used engine.

Freight

A dressed ISL weighs around 1,700 to 1,900 pounds. Inside the United States it goes by freight truck. Overseas it goes by sea in a crate. We put freight in every quote.

Labor

Pulling and fitting an ISL takes a good shop somewhere around one to three days, depending on the vehicle. A motorhome or a bus can take longer than a straight truck because access is tighter.

Parts and fluids

Oil, filters, coolant, gaskets, hoses and clamps. Plan for a few hundred dollars, more if old hoses are cracked.

Programming

The ECM has to be set up for your vehicle. Most diesel shops can do it. It is a small cost, but do not leave it out.

Aftertreatment

If the old engine pushed oil into the exhaust before it died, the DPF may need cleaning. Ask your shop to check it.

Add all of that to the engine price and you have the true Cummins ISL replacement engine cost. Even with everything in, it is a small part of what a new truck, bus or coach would cost.

Cummins ISL Specifications

EngineCummins ISL inline six diesel
YearsLate 1990s to 2017, replaced by the Cummins L9
Displacement8.3 liters on early engines, 8.9 liters (540 cubic inches) on most engines today
ConfigurationInline 6, 4 valves per cylinder
Bore x stroke (8.9L)114 mm x 145 mm (4.49 in x 5.69 in)
Fuel systemCAPS pump on early engines, high pressure common rail on later engines
Engine controlCM850, CM2150 or CM2250 depending on year
Power rangeAbout 260 to 450 hp depending on rating
Torque rangeAbout 800 to 1,250 lb-ft depending on rating
Firing order1-5-3-6-2-4
AspirationTurbocharged and charge air cooled, variable geometry turbo on EGR engines
EmissionsEGR from the mid 2000s, DPF from 2007, SCR with DEF from 2010
Approximate weightAbout 1,700 to 1,900 lb dressed

The ISL grew out of Cummins’ C series engine family and became one of its best selling mid range diesels. You can read about that family on the Cummins C Series engine page. Later ISL engines use a common rail fuel system, which runs cleaner and quieter than the older pump.

The jump from 8.3 to 8.9 liters is worth knowing about. They look alike but they are not the same engine inside, and they do not swap as easily as people hope. Match what you had and the Cummins ISL replacement engine cost stays where you expect it.

Vehicles That Use the ISL

  • Freightliner M2 106 and M2 112, FL70 and FL80
  • Kenworth T370, T440 and T800 medium duty versions
  • Peterbilt 330, 335, 348 and 365
  • International WorkStar and other medium trucks
  • School buses from Blue Bird and Thomas
  • Transit buses from Gillig, New Flyer and others
  • Diesel pusher motorhomes from many builders
  • Fire trucks, refuse trucks, cranes and generators

Truck, bus and motorhome engines often have different oil pans, front gear covers, fan drives and wiring. Tell us exactly what your engine came out of so the Cummins ISL replacement engine cost we quote is for an engine that bolts in.

7 Ways to Keep the Cummins ISL Replacement Engine Cost Down

1. Match the year group exactly

Pre-2007, 2007 to 2009 and 2010 and later engines all have different emissions hardware and ECMs. Matching your year group is the single biggest saving you can make.

2. Send the serial number and CPL

Both are on the data plate on the engine. With them, we can match the build, which avoids costly surprises during the install.

3. Reuse good parts

If your turbo, ECM, compressor and starter are fine, a long block can save real money. Have your shop check them before you order.

4. Get the delivered price, not just the engine price

Freight to a far away port can add a lot. Ask for the full total in writing before you compare sellers.

5. Fix the cause of the failure

If the old engine died from overheating, dust or bad fuel, fix that first. Otherwise you will pay the Cummins ISL replacement engine cost twice.

6. Plan the programming

Book a shop that can set up the ECM so the vehicle is not sitting while you hunt for one.

7. Buy tested, not cheapest

A cheap engine with no history is a gamble. A tested engine with a known serial number is a much safer way to spend your money.

For more on how engines are checked before they ship, read our guide to tested used engines.

Common Cummins ISL Problems

Knowing the weak spots helps you judge an engine and plan the job.

CAPS fuel pump on early engines

The older 8.3 liter ISL used a CAPS pump that can wear and fail. Hard starting and low power are the usual signs.

EGR valve and cooler

On EGR engines, the valve can stick and the cooler can leak coolant. Watch for coolant loss with no outside leak.

Turbo actuator

The variable geometry turbo actuator can fail and set codes. You can read how a variable geometry turbocharger works if you want the background.

Injectors and dirty fuel

Common rail systems hate water and dirt. Keep fuel filters fresh and drain the water separator often.

DPF and aftertreatment

Buses and motorhomes that idle a lot fill the DPF faster. Regular highway runs help.

Oil and coolant leaks

Front cover, rear seal and oil cooler leaks show up on high mile engines.

All of these are known and fixable. Ask about them before you agree on any Cummins ISL replacement engine cost.

Signs Your ISL Needs Replacing

Not every sick ISL needs a new engine. Sensors, wiring and aftertreatment cause plenty of trouble on their own. These signs usually mean the engine itself is finished:

  • A deep knock from the bottom end that gets worse under load
  • Coolant in the oil for long enough to damage the bearings
  • Heavy blow by with high oil use
  • Low compression on several cylinders
  • Metal in the oil filter
  • A spun bearing, broken crank or cracked block

If you see these, get a repair quote and compare it with the Cummins ISL replacement engine cost. On a high mile engine, replacement usually wins once labor and downtime are counted. Tell us what your mechanic found and we will give you an honest opinion.

Repair or Replace, a Worked Example

Numbers help here, so let us walk through a typical case. Say you have a Freightliner M2 with an ISL that spun a rod bearing at 420,000 miles. Your shop looks at it and says the crank is damaged and the block may need machine work.

A full rebuild on that engine means a crank, bearings, pistons, liners, gaskets, machine work and a lot of labor hours. It also means the truck sits while the engine is torn down, parts are ordered and everything goes back together. That can be weeks, not days.

Now look at the replacement side. You buy a tested engine, it ships, your shop swaps it in a day or two, sets up the ECM and the truck goes back to work. You still pay for freight, labor, fluids and small parts, but the job is quicker and the total is usually lower.

When the damage is limited, like a leaking oil cooler or a bad injector, repair wins easily. When the bottom end is gone, the Cummins ISL replacement engine cost almost always comes out ahead. Downtime matters too. A truck or bus that is not working is losing money every day it sits.

If you are not sure which side your engine falls on, send us your mechanic’s findings. We will tell you honestly whether we think it is worth fixing.

ISL or L9, Which One Do You Need?

Cummins replaced the ISL with the L9 in 2017. The L9 is built on the same basic 8.9 liter design, but the software, sensors, wiring and emissions parts are different. Some parts carry over and many do not.

If your vehicle was built with an ISL, replace it with an ISL from the same year group. That keeps the wiring, the dash, the aftertreatment and the programming simple. Trying to fit an L9 into an older ISL vehicle adds parts and labor, and that pushes the Cummins ISL replacement engine cost up without giving you much in return.

If your vehicle was built with an L9, tell us and we will look at what we can offer for that engine instead.

Used vs Rebuilt vs In-Frame Overhaul

Used engine. Fastest and usually cheapest. A tested engine can be running in your vehicle soon after it arrives.

Rebuilt engine. Costs more, but you get new wear parts. It makes sense if you plan to keep the vehicle for a long time.

In-frame overhaul. Your shop rebuilds the engine in place. Only possible if the block and crank are good.

For most owners, a tested used engine keeps the Cummins ISL replacement engine cost lowest. Our post on replacement engine cost goes into this in more detail.

ISL Replacement in a Motorhome

A lot of our ISL buyers own diesel pushers. A motorhome job is a little different from a truck job. The engine sits under the bed or at the back, access is tight and some coaches need the engine dropped out from below. Labor can run higher than on a straight truck.

Motorhome engines also often sit for long periods. That is not ideal for any diesel. When we match an engine for a coach, we look for one with a good history and send you the details. Tell us the coach builder, year and model, and we will include it all in the Cummins ISL replacement engine cost we quote.

ISL Replacement in Buses and Fleets

School districts, transit fleets and delivery companies often run many ISL engines. A spare on the shelf can keep a route running while a failed engine is swapped. We can quote two or more engines together and ship them together, which often brings the freight per engine down. That lowers the Cummins ISL replacement engine cost for each one.

Questions to Ask Any Seller

  • What are the serial number and CPL number?
  • Is it an 8.3 or an 8.9, and which year group?
  • Which ECM is on it?
  • What did it come out of, and why was it removed?
  • Has it been run, and is there a video or test result?
  • What exactly is included?
  • What is the delivered total, with crating and freight?
  • How do I pay, and what paperwork do I get?

A seller who knows engines will answer these without fuss. We answer every one in writing before you pay.

How to Match the Right ISL

Send us:

  • A photo of the engine data plate with serial and CPL numbers
  • Vehicle make, model, year and VIN
  • Transmission model
  • Which of your old parts are still good
  • Your country and nearest port or city

We will match the engine and send an exact Cummins ISL replacement engine cost with freight.

What You Get From Us

  • A tested Cummins ISL with serial and CPL numbers recorded
  • Photos of the actual engine
  • A clear list of what is included
  • Miles where we have them
  • Proper crating
  • Tracking until it arrives
  • Straight answers from people who know engines

Read our refund and returns policy and billing terms before you order.

Shipping an ISL Worldwide

We ship engines all over the world. Inside the United States, engines go by freight truck. Overseas, we crate the engine and ship by sea, and we handle the export paperwork on our side. Air freight is there when the job cannot wait.

Freight is included in the Cummins ISL replacement engine cost we quote, so you see the full figure from the start. See our shipping policy for details. Import duties are paid on your side, so check with your customs broker.

Installation Tips for an ISL

  • Flush the radiator and cooling system first
  • Fit new oil and fuel filters and drain the water separator
  • Prime the fuel and oil systems before the first start
  • Check the charge air cooler and pipes for oil and leaks
  • Check the DPF if the old engine was burning oil
  • Check connectors and grounds
  • Set up the ECM for your vehicle
  • Let it idle and look for leaks before you put it to work

Looking After Your ISL

Use a good heavy duty oil and change it on time. Keep the coolant right. Change fuel filters on schedule and drain water often. Keep idle time down where you can and let the regens finish. Watch your temperatures and oil pressure.

Do the small things and your engine will pay back the Cummins ISL replacement engine cost many times over.

Other Engines We Sell

See our Cummins ISL buying guide, the smaller Cummins 6BT and the bigger Cummins ISX15.

We also sell the Caterpillar C7, the Hino J08E, the Isuzu 6HK1, the Volvo D13 and many more used diesel engines. See them all in our shop.

How to Order

  1. Send us the data plate photo, your vehicle details and your country.
  2. We match the engine and send photos, the serial number, CPL, miles and what is included.
  3. We send the full Cummins ISL replacement engine cost with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. New to buying engines online? Read how buying a used engine online works.

About our prices

The Cummins ISL replacement engine cost on this page is what we charge today for a tested engine. Stock changes. A newer or lower mile engine may cost more and an older one may cost less. We always tell you the year, miles and condition of the exact engine we quote.

Frequently Asked Questions

What is the Cummins ISL replacement engine cost?

$7,900 for a tested engine from us, down from $9,500. Freight, labor and parts are extra.

Can I put an 8.9 in place of an 8.3?

It can be done, but it is not a simple swap. Matching is much cheaper.

Does it come with the DPF?

Usually not. We tell you exactly what is included.

Will I need programming?

Yes, the ECM needs to be set up for your vehicle.

Do you sell ISL engines for motorhomes?

Yes. Tell us the coach builder and year.

Do you ship worldwide?

Yes, by road, sea and air.

How do I pay?

By bank transfer, with an invoice and order confirmation by email.

Final Word on the Cummins ISL Replacement Engine Cost

A truck, bus or coach with a dead ISL is still worth saving. A tested engine keeps the Cummins ISL replacement engine cost far below the price of a new vehicle.

Match the year group. Send the serial and CPL. Reuse good parts. Fix whatever killed the old engine. Plan the programming. Get the delivered total in writing.

When you are ready, see our Cummins ISL engines or send us your data plate photo, and we will send a straight Cummins ISL replacement engine cost with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983