WhatsApp: +1 209 690 5983

JDM SR20DET engine price

JDM SR20DET Engine Price: 7 Proven Tips to Get a Great Deal

If you are pricing a Silvia rebuild or a 240SX swap, you have probably seen the JDM SR20DET engine price all over the place. Some listings look too cheap. Others look like someone is selling a museum piece. It is hard to tell what a fair number actually is.

We sell tested, fairly used SR20DET engines imported from Japan, and we ship them to buyers around the world. This page lays out our real JDM SR20DET engine price, what makes one engine cost more than another, the full specs, the different versions, and what to check before you hand over any money.

Want a quote today? Call +1 (209) 733-0882 or send your car details through our contact page. You can also see stock on the Nissan SR20DET Engine for Sale product page.

JDM SR20DET Engine Price Today

Our current JDM SR20DET engine price starts at $3,500 for a tested, fairly used complete engine. The regular price is $4,200, so right now you save $700. That is the engine itself. A gearbox, the ECU and wiring, or shipping are added to your quote depending on what you need.

We put the number out in the open on purpose. Too many sellers make you fill in a form just to find out the price, then quote whatever they feel like. Our listed JDM SR20DET engine price is a real starting point, and your final number only changes for real reasons, like adding a gearbox or shipping to a far away port.

What you are buyingTypical price from us
SR20DET complete engine (S13 or S14)From $3,500
SR20DET S15 complete engineQuoted on request, usually higher
Engine plus 5-speed manual gearboxQuoted on request
Engine plus ECU and wiring loomQuoted on request
Shipping by sea or airQuoted by destination

For a quick estimate, start with $3,500, add the gearbox if you need one, then add freight to your country. Then ask us for the exact JDM SR20DET engine price for your car and we will put it in writing.

JDM SR20DET engine price

What Is the SR20DET?

The SR20DET is a 2.0 litre, four cylinder, turbocharged petrol engine from the Nissan SR engine family. Nissan built it from the late 1980s into the early 2000s. It is best known as the engine in the Silvia and 180SX, but it also went into the Pulsar GTI-R, the Bluebird SSS and the Avenir wagon.

It earned its name in drifting and street tuning. It is light, it revs freely, and it responds well to simple upgrades. A bigger turbo, a good intercooler, injectors and a tune can turn a stock SR into a very quick car. The parts market is enormous, so you are never stuck for bits.

That combination of light weight, easy power and parts supply is the main reason the JDM SR20DET engine price has climbed steadily as clean cars get harder to find.

SR20DET Specifications

Here are the basics. Output changes between versions, so we always confirm which one you are getting before we lock in a JDM SR20DET engine price.

LayoutInline four-cylinder, petrol, turbocharged
Displacement1,998 cc (2.0 litre)
Bore x stroke86.0 mm x 86.0 mm (square)
BlockAluminium
Cylinder headAluminium, DOHC, 16 valves
Valve timingVariable intake timing on later versions
Compression ratioAbout 8.5:1
TurboGarrett T25 (S13), T28 (S14, S15 and GTI-R)
Power (S13)About 205 PS (151 kW)
Power (S14)About 220 PS (162 kW)
Power (S15)About 250 PS (184 kW) at 6,400 rpm
TorqueAbout 275 Nm depending on version
Firing order1-3-4-2
Timing driveChain
FuelPremium unleaded
Engine oil capacityRoughly 3.5 to 4 litres with filter

One nice thing about the SR is the timing chain. There is no belt to change every few years, which saves money over the life of the engine.

SR20DET Versions and What They Do to the Price

People talk about SRs by the colour of the rocker cover. It sounds odd if you are new to it, but it is a handy shorthand. Each version has a slightly different JDM SR20DET engine price.

Redtop (early S13 and 180SX)

The first SR20DET in the Silvia and 180SX. Red rocker cover, T25 turbo, no variable cam timing. These are simple, tough and usually the cheapest. Great as a base for a build where you plan to change the turbo anyway.

Blacktop (later S13 and S14)

Black rocker cover with variable intake cam timing, a T28 turbo on the S14, and more power. The S14 blacktop is a popular all-rounder and sits in the middle for price.

S15 (Spec R and Spec S)

The last and strongest factory SR in a Silvia. It has a ball bearing T28, a bigger intercooler and around 250 PS. Spec R engines came with a 6-speed manual. Demand is high, so an S15 engine carries the top JDM SR20DET engine price.

Pulsar GTI-R and Bluebird

The GTI-R engine has a top mount intercooler, individual throttle bodies and a different sump for the all wheel drive layout. Bluebird and Avenir engines are often set up for front or all wheel drive too. These can need a different sump, manifold or turbo setup to suit a rear wheel drive car, so tell us your target car before we quote.

What Affects the JDM SR20DET Engine Price?

Two SRs can look the same in photos and still be very different engines inside. These are the things that move the JDM SR20DET engine price up or down.

1. Version

S15 costs the most. Redtop usually costs the least. Blacktop sits in the middle.

2. Condition and compression

Even compression across all four cylinders, a dry turbo and a clean oil history all add value. We send compression numbers before you pay so you can see it for yourself.

3. What comes with it

Our complete engines include the turbo and manifolds. Add the ECU, loom, AFM and gearbox and the number goes up, but you save a lot of hunting.

4. Gearbox

The S15 6-speed is the most wanted. The 5-speed from the S13 and S14 is common and costs less. Both are available on request.

5. Shipping

Sea freight costs less and takes longer. Air freight costs more and gets there fast. Your quote shows both options.

6. Market demand

Clean Silvias are rare now, and good engines get snapped up. If the JDM SR20DET engine price you see today looks fair, it probably will not be lower next year.

Why Buyers Choose Us for Their SR20DET

Most horror stories come from buying an engine with no real photos, no test results and no warranty. We do it differently.

  • Real photos of the exact engine you are buying.
  • Compression numbers for every cylinder, sent before payment.
  • Engine number recorded and shown in the photos.
  • Written quote with the full JDM SR20DET engine price and shipping.
  • Written warranty on every engine.
  • Worldwide shipping with tracking.

Want to know how we test? Our guide to tested used engines explains it, and our post on low mileage used engines shows how we grade them.

Which Cars Came With the SR20DET?

Knowing the donor car helps you understand what you are buying and what will bolt in. Factory SR20DET cars include:

  • Nissan Silvia S13, S14 and S15
  • Nissan 180SX
  • Nissan Pulsar GTI-R (N14)
  • Nissan Bluebird SSS ATTESA (U12 and U13)
  • Nissan Avenir GT4 wagon

If you own a Silvia or 180SX with a tired engine, a direct replacement is the cheapest and quickest fix. In most cases the JDM SR20DET engine price for a tested replacement comes in under the cost of a full rebuild once machining and parts are added up.

A huge number of our SR engines end up in cars that never came with one.

Nissan 240SX (S13 and S14)

The North American 240SX came with the KA24 engine. The SR20DET swap is the classic upgrade. It drops in with the right mounts, wiring and gearbox. Many buyers take the 5-speed with the engine so the whole drivetrain is from Japan.

Older Datsuns

Datsun 510s and 1200s with an SR are a well-known combination. The engine is light, so handling stays sharp.

Nissan 200SX and other markets

Some markets got the SR20DET already. Owners there often buy a replacement after years of hard use.

Kit cars and other platforms

Its small size and light weight make the SR popular in kit cars, Mazda MX-5 conversions and track builds.

When you ask about the JDM SR20DET engine price for a swap, tell us the target car. We will tell you which version suits it and what extra parts you will need, so nothing catches you out later.

Nissan SR20DET turbo engine

Common SR20DET Problems

The SR is tough, but it is not perfect. Here is what we check, and what you should ask about before paying any JDM SR20DET engine price.

Rocker arms

Over-revving can throw a rocker arm. It is one of the best known SR faults. Rocker stoppers are cheap and stop it from happening. Many builders fit them during the swap.

Timing chain wear

Chains last a long time but can stretch on high mileage engines. A rattle at start up can point to a worn tensioner or guides.

Turbo wear

Old turbos can have shaft play or leak oil. We check every turbo and tell you its condition before you buy.

Oil leaks

Rocker cover gaskets and the rear main seal harden with age. New gaskets during install keep things clean.

Sensor and wiring age

The AFM, coolant sensor and old plugs can cause rough running. These are cheap to replace and worth doing before first start.

None of these are deal breakers. They are normal on an engine of this age. The point is to know about them up front.

7 Checks Before You Pay a JDM SR20DET Engine Price

Whether you buy from us or anyone else, go through these first.

  1. Get the engine number. It is stamped on the block near the gearbox. Make sure it matches the photos.
  2. Get compression numbers. All four cylinders should be close to each other.
  3. Check the turbo. Shaft play or oil in the intake is a warning sign.
  4. Confirm the version. Redtop, blacktop, S15 or GTI-R all need different parts.
  5. List what is included. ECU, loom, AFM, turbo, starter, alternator.
  6. Get the warranty in writing.
  7. Get the full JDM SR20DET engine price in writing with shipping. Then it cannot change later.

We do every one of these as standard. If a seller will not, walk away.

Rebuild Your Old SR or Buy a Tested One?

If your current engine has a knock, low compression or a cracked ring land, a rebuild means pistons, rings, bearings, head work, gaskets and a lot of labour. Once you add it all up, the bill often matches or beats the JDM SR20DET engine price for a tested replacement.

There is also downtime. A rebuild can take weeks. A tested replacement can be in and running within a few days of arriving. For street cars and most drift builds, replacing makes more sense. For a full race engine with forged parts, a rebuild might be the better route.

For a broader look at buying an engine from a distance, read our guide on how to buy a used engine online.

Budgeting for the Whole Job, Not Just the Engine

This is where a lot of people get caught. They see a good JDM SR20DET engine price, buy the engine, and then find out the swap needs another pile of parts. Plan for the full job from day one and you will not stall halfway through.

Here is a rough list of what a typical SR swap needs besides the engine. Not every car needs all of it, and some of it may already be on your car.

  • Engine mounts to suit your chassis.
  • ECU and wiring loom, or a standalone ECU if you plan to tune.
  • Gearbox and clutch, if your current box does not match.
  • Intercooler and piping, especially if your car was never turbo.
  • Radiator and hoses sized for a turbo engine.
  • Fuel pump that can keep up with boost.
  • Exhaust from the turbo back.
  • Fluids, filters, plugs and gaskets.
  • Labour, if you are not doing the work yourself.

We can supply the engine with the ECU, loom and gearbox, which takes the hardest parts off your list. Ask for a package quote and we will show the JDM SR20DET engine price with each extra item listed, so you can choose what makes sense for your budget.

A tip from experience: do not buy the cheapest engine and then spend the savings fixing it. A tested engine at a fair JDM SR20DET engine price, plus a sensible parts list, almost always costs less in the end than a bargain engine that needs work.

A Little History Behind the Engine

Nissan introduced the SR family to replace the older CA engines. The turbo version first went into the Bluebird, then the Silvia and 180SX in the early 1990s. Over the next decade Nissan kept improving it, adding variable cam timing, a better turbo and a stronger intercooler setup. The S15 Silvia, sold until 2002, carried the final and most powerful version.

Drifting made the engine famous worldwide. Japanese drivers loved how light and responsive the Silvia was with an SR up front, and the rest of the world followed. That history is part of why the JDM SR20DET engine price stays strong. People are not just buying an engine. They are buying a piece of car culture that still works brilliantly today.

How to Order

  1. Send your details. Car, year and whether it is a replacement or a swap. Use our contact page or call +1 (209) 733-0882.
  2. Get your quote. Photos, test numbers, engine number and the written JDM SR20DET engine price with shipping.
  3. Pay by bank transfer. It is the only method we accept. See our billing terms.
  4. We ship. Drained, sealed, strapped down and tracked. Details are in our shipping policy.
  5. Install and enjoy. Follow the tips below and keep your paperwork.

Worldwide Shipping

We send SR20DET engines to the Americas, Europe, Africa, the Middle East, Asia and Oceania. Every quote shows freight clearly, so the JDM SR20DET engine price you agree to is the price to get it where you need it.

Sea freight is the usual choice because an engine is heavy. Air freight suits buyers who need the car back on the road fast. Both come with tracking and regular updates from us.

Local import duty and taxes are paid by the buyer on arrival. Check with a local customs broker if you are not sure what your country charges.

Install Tips That Save Headaches

  • Fit rocker stoppers. Cheap and they prevent the most famous SR failure.
  • Check the timing chain tensioner. If it rattles on start up, deal with it now.
  • New plugs, fresh coolant and a new thermostat. Do not reuse old fluids.
  • Prime the oil system. Crank with ignition and fuel off until you see oil pressure.
  • Check every hose. Old boost and vacuum hoses split and cause odd running.
  • Use the right ECU for the version. Mixing a redtop ECU with a blacktop engine causes problems.

Break-In and Long-Term Care

  • Change the oil and filter after the first 500 km.
  • Keep boost stock until you know the engine is healthy.
  • Watch oil pressure and water temperature closely at first.
  • Let the turbo cool for a minute after hard driving.
  • Use good oil and change it on time.

Look after it and an SR will reward you for years. That is when a fair JDM SR20DET engine price feels like the best money you spent on the car.

SR20DET Versus Other Engines at a Similar Budget

SR20DET vs RB25DET

The Nissan RB25DET has two more cylinders, more torque and a heavier block. The SR is lighter, fits the Silvia bay without changes and costs less. Read our RB25DET engine price guide to compare.

SR20DET vs Honda K20A

The Honda K20A is naturally aspirated and revs very high. It suits front wheel drive Hondas. The SR is turbo from the factory and built for rear wheel drive.

SR20DET vs Mitsubishi 4G63T

The Mitsubishi 4G63T has an iron block and loves big boost. The SR is lighter. Both are great four cylinder turbo engines with huge followings.

SR20DET vs Toyota 3S-GTE

The Toyota 3S-GTE came in the MR2 Turbo and Celica GT-Four. It is a fine engine, but the SR has far more aftermarket support for rear wheel drive swaps.

Questions Buyers Ask Us Every Week

Is this a running engine? Yes. The JDM SR20DET engine price we list is for a tested, running engine. Results come with your quote.

Can I see a video? Often, yes. Ask and we will try to get a clip of the engine turning over.

Do you have more than one? Usually. Tell us what you need and we will match it.

Will the price change after I pay? No. Your written JDM SR20DET engine price, with shipping, is final.

More Nissan and JDM Engines

Browse our Nissan engines and read our JDM engines for sale guide. You might also like the SR20DET engine for sale guide, the Honda B18C guide, the Mazda 13B rotary, the Nissan QR25DE and our engine and transmission combo page. Or just browse the full shop.

Frequently Asked Questions About the JDM SR20DET Engine Price

What is the JDM SR20DET engine price right now?

Our tested, fairly used SR20DET engines start at $3,500. S15 engines, gearboxes and shipping are quoted separately.

Why does the S15 cost more?

It makes the most power, has a ball bearing turbo and is in the highest demand. Supply is lower, so its JDM SR20DET engine price is higher.

Does it come with a turbo?

Yes. Our complete engines include the turbo and manifolds. We confirm everything included in writing.

Will it fit my 240SX?

Yes, with the right mounts, wiring, ECU and gearbox. Tell us your car and we will list what you need.

How long is shipping?

Air takes days. Sea takes a few weeks depending on the route. You get an estimate with your quote.

Is there a warranty?

Yes, in writing. See our refund and returns policy.

How do I pay?

Bank transfer only.

Get Your SR20DET Quote

Tell us about your car and your plans. We will send photos, test numbers and a written JDM SR20DET engine price with shipping to your country. No pressure, just a straight answer and a good engine.

Call +1 (209) 733-0882 or use our contact page. You can also check stock on the SR20DET product page.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983