The K20A is one of those engines people get a little obsessive about. Once you have heard one scream past 8,000 rpm, it is hard to go back to anything else. So it is no surprise we get asked about the JDM Honda K20A engine price more than almost any other four-cylinder we sell.
We sell tested, fairly used K20A engines imported from Japan, and we ship them worldwide. This page gives you our real JDM Honda K20A engine price, the full specs, the different versions, the cars it came in, the swaps people do, and the checks you should make before you pay anyone for one.
Ready for a quote? Call +1 (209) 733-0882 or send your details through our contact page. You can also see stock on the Honda K20A Engine for Sale product page.
Table of Contents
JDM Honda K20A Engine Price Today
Our current JDM Honda K20A engine price starts at $3,300 for a tested, fairly used complete engine. The regular price is $3,900, so you save $600 at the moment. That covers the engine. A gearbox, ECU, wiring or shipping are quoted on top depending on your build.
We show the price openly because we think you should know it before you start talking to us. Your final JDM Honda K20A engine price only changes for clear reasons, such as the version you choose, adding a gearbox, or where we are shipping to.
| What you are buying | Typical price from us |
| K20A complete engine | From $3,300 |
| K20A Type R engine (DC5, EP3, FD2) | Quoted on request, usually higher |
| Engine plus 6-speed manual gearbox | Quoted on request |
| Engine plus ECU and wiring | Quoted on request |
| Shipping by sea or air | Quoted by destination |
For a ballpark, start at $3,300, add the gearbox if you need it, and add freight. Then ask us for the exact JDM Honda K20A engine price for your car and we will send it in writing.

What Is the K20A?
The K20A is a 2.0 litre, four cylinder, naturally aspirated petrol engine from the Honda K engine family. It replaced the older B-series in the early 2000s and brought in Honda’s i-VTEC system, which pairs VTEC cam switching with variable cam timing on the intake side.
The best known K20A engines came out of the Japanese market Type R cars: the Integra Type R DC5, the Civic Type R EP3 and the Civic Type R FD2. The Accord Euro R also got a high output version. These engines rev to around 8,400 rpm or more, make big power without a turbo, and are strong enough to take boost if you want it later.
The K20A also fixed a lot of the old B-series headaches. It uses a timing chain instead of a belt, it has a stronger block, and it is easier to package in a car. That is why the JDM Honda K20A engine price has stayed high even as these engines get older.
K20A Specifications
These numbers cover the Type R versions most buyers ask about. We confirm the exact version before we finalise any JDM Honda K20A engine price.
| Layout | Inline four-cylinder, petrol, naturally aspirated |
| Displacement | 1,998 cc (2.0 litre) |
| Bore x stroke | 86.0 mm x 86.0 mm |
| Block and head | Aluminium with cast iron sleeves |
| Valvetrain | DOHC i-VTEC, 16 valves |
| Compression ratio | About 11.5:1 (Type R) |
| Power (DC5 Type R) | About 220 PS (162 kW) at 8,000 rpm |
| Power (EP3 Type R) | About 215 PS (158 kW) at 8,000 rpm |
| Power (FD2 Type R) | About 225 PS (165 kW) at 8,000 rpm |
| Torque | About 202 to 215 Nm depending on version |
| Redline | Around 8,400 to 8,600 rpm |
| Timing drive | Chain |
| Firing order | 1-3-4-2 |
| Fuel | Premium unleaded |
| Engine oil capacity | Roughly 4 to 4.5 litres with filter |
Over 100 PS per litre from a road car engine with no turbo is still impressive today. It was remarkable when these first came out. Honda engineers built these engines to be driven hard every day, not just on a dyno, and that shows in how many high mileage K20A engines still pull cleanly to redline. A healthy one feels eager from the moment it fires up.
K20A Versions and How They Change the Price
Not every K20A is a Type R engine, and the version makes a real difference to the JDM Honda K20A engine price.
K20A from the Integra Type R DC5
Probably the most wanted version. Red valve cover, high compression, aggressive cams and around 220 PS. It is popular for swaps because the intake and exhaust layout suits many cars.
K20A from the Civic Type R EP3
Very close to the DC5 engine with a slightly different setup and around 215 PS. A great engine and often a little easier on the wallet.
K20A from the Civic Type R FD2
The last of the JDM K20A Type R engines in a Civic sedan. A revised intake, higher output and very sharp throttle response. It usually sits at the top of the JDM Honda K20A engine price range.
K20A from the Accord Euro R
A high output version in a bigger car. It is a strong engine and can be good value for a swap, though some parts differ from the Integra and Civic engines.
Non Type R K20A engines
Some Stream, Civic and other models used milder K20A engines. These cost less and suit daily drivers, but they do not rev or pull like a Type R. Tell us your goal and we will point you to the right one.
What Affects the JDM Honda K20A Engine Price?
1. Version
FD2 and DC5 Type R engines cost the most. Milder K20A engines cost less.
2. Condition and compression
Even compression and a clean history push value up. We send numbers for all four cylinders before you pay.
3. What is included
Our complete engines come with the intake manifold, throttle body and most ancillaries. Add the ECU, loom or gearbox and the number rises.
4. Gearbox
The 6-speed manual from the Type R cars is in big demand. Many swap buyers take it with the engine. Some versions also came with a limited slip diff, which adds value.
5. Shipping
Sea is cheaper, air is faster. We quote both.
6. Market demand
K-swaps are more popular than ever. That keeps the JDM Honda K20A engine price firm, and good engines do not sit around long.
Why People Buy Their K20A From Us
- Real photos of the exact engine you will get.
- Compression numbers for every cylinder, before payment.
- Engine number recorded and shown in the photos.
- Written quote with the full JDM Honda K20A engine price and freight.
- Written warranty on every engine.
- Worldwide shipping with tracking.
See how we test in our tested used engines guide, and how we grade mileage in our low mileage used engines post.
Which Cars Came With the K20A?
- Honda Integra Type R (DC5)
- Honda Civic Type R (EP3, Japanese market)
- Honda Civic Type R (FD2)
- Honda Accord Euro R (CL7)
- Honda Stream and other models with milder K20A versions
If you have one of these cars and the engine is worn out, a direct replacement is the easiest fix. For most owners, the JDM Honda K20A engine price for a tested unit costs less than a full rebuild once parts, machining and labour are counted.
Popular K20A Swaps
Most of our K20A engines go into cars that never had one from the factory. K-swapping is a whole scene of its own.
Honda Civic EG and EK
The classic K-swap. Mounts, a K-series shifter setup, axles and wiring are all available as kits. The car gains a lot of power and stays light.
Integra DC2
A DC2 with a K20A is a seriously quick car. The swap is well documented and parts are easy to find.
Honda S2000 and others
Less common, but some owners go K for the chain drive and parts supply.
Non Honda swaps
We have shipped K20A engines for Mazda MX-5 builds, Lotus and Caterham style cars, Minis, kit cars and even off road buggies. It is light, compact and reliable, which makes it easy to package.
When you ask about the JDM Honda K20A engine price for a swap, tell us the target car. We will tell you which version suits it and what else you will need to buy.

K20A Problems to Know About
The K20A is very reliable, but there are a few things we check before quoting a JDM Honda K20A engine price, and you should ask about them too.
Timing chain tensioner
A worn tensioner can cause a short rattle on cold start. It is a known item and easy to replace.
Valve clearance
K engines use screw type adjusters. If clearances have not been checked in a long time, the engine can lose a little power or tick. Checking them during install is a smart move.
Oil consumption on hard driven engines
Engines that spent their lives at high rpm on track days can burn some oil. Compression and leak down tests show this up.
Exhaust cam lobe wear
Some K engines, especially non Type R ones, can show exhaust cam wear. We inspect for it where we can and tell you what we find.
Old gaskets and seals
The valve cover gasket and cam plugs harden over time. Fresh gaskets during install are cheap and stop leaks.
7 Checks Before You Pay a JDM Honda K20A Engine Price
- Get the engine number. It is stamped on the block below the exhaust manifold side. Make sure it starts with K20A.
- Get compression numbers. All four should be close.
- Confirm the version. DC5, EP3, FD2, Euro R or non Type R.
- Check what is included. Intake, throttle body, ECU, loom, alternator, starter.
- Ask about the gearbox. Is it included? Does it have an LSD?
- Get the warranty in writing.
- Get the full JDM Honda K20A engine price in writing with shipping.
We do all of this as standard. If a seller hesitates on any of them, think twice.
How We Test a K20A Before It Is Listed
A clean looking engine tells you very little. Plenty of tired engines get a wash and a quick spray before they go up for sale. So here is exactly what happens to a K20A before we put a JDM Honda K20A engine price on it.
- Visual check. We look for cracks, heavy corrosion, broken bolts, missing sensors and signs the engine has been opened up before.
- Compression test. All four cylinders are tested, and the numbers are written down and sent to you.
- Oil check. We pull the dipstick and look at the oil. Milky oil, metal flakes or a burnt smell are all warning signs.
- Turn over by hand. The engine should turn smoothly through a full rotation without tight spots or noises.
- Valve cover off where possible. This lets us look at the cams, rockers and the VTEC hardware for wear or sludge.
- Engine number logged. It goes on your quote and appears in the photos.
If an engine does not pass, it does not get listed as a running K20A. It is that simple. This is part of what you are paying for in our JDM Honda K20A engine price. You are not just buying metal. You are buying a known engine with real numbers behind it.
Picking the Right K20A for Your Build
We talk to a lot of buyers who are about to spend more than they need to. Here is how we usually steer people.
Weekend street car. An EP3 or DC5 engine is plenty. You get the full Type R feel without paying the top JDM Honda K20A engine price for an FD2.
Track car. A DC5 or FD2 engine with the 6-speed and LSD is the classic setup. Spend the extra on the gearbox. It makes a bigger difference on track than a few horsepower.
Turbo build. A healthy non Type R K20A or a K24 bottom end can be a smart base, since you will likely change pistons and rods anyway. No need to pay for Type R cams you may swap out.
Daily driver replacement. Match what your car came with. It is the easiest and cheapest way back on the road.
Tell us how you will use the car. We would rather sell you the right engine at a lower JDM Honda K20A engine price than the most expensive engine you do not really need.
Rebuild or Replace?
If your K20A has a spun bearing, low compression or a damaged head, a rebuild means machining, pistons, rings, bearings, valve work and plenty of labour. Add it up and the bill often comes close to the JDM Honda K20A engine price for a tested replacement, sometimes more.
Time matters too. A rebuild can keep you off the road for weeks. A tested replacement can be in and running a few days after it arrives. For street cars and most track builds, replacement is usually the better deal.
Our guide on how to buy a used engine online covers the basics if you are new to importing an engine.
Budget for the Whole Swap
A good JDM Honda K20A engine price is only part of the story. Plan for these too:
- Swap mounts for your chassis
- Shifter cables and linkage
- Axles or intermediate shaft
- ECU and wiring, or a standalone ECU
- Radiator and hoses
- Exhaust header and system
- Fuel system parts
- Clutch and flywheel
- Fluids, filters and gaskets
We can supply the engine with the gearbox, ECU and loom, which covers the hardest parts. Ask for a package quote and we will list each item so you can pick what you need.
How to Order
- Send us your details. Car, year, and whether it is a replacement or swap. Use our contact page or call +1 (209) 733-0882.
- Get your quote. Photos, test results, engine number and the written JDM Honda K20A engine price with shipping.
- Pay by bank transfer. It is the only method we accept. See our billing terms.
- We ship. Drained, sealed, secured and tracked. Read our shipping policy.
- Install and enjoy. Follow the care tips below.
Worldwide Shipping
We ship K20A engines to the Americas, Europe, Africa, the Middle East, Asia and Oceania. Freight is shown on your quote, so the JDM Honda K20A engine price you agree to covers getting the engine to you.
Sea freight is the usual choice for weight and cost. Air freight is there when time matters. You get tracking either way. Import duty and local taxes are paid by the buyer on arrival.
Install Tips From Experience
- Check valve clearances before first start.
- Look at the chain tensioner. Replace it if there is any doubt.
- Fresh plugs, coolant and thermostat.
- Prime the oil with ignition and fuel disabled.
- Use the right ECU for your version, or a proper tune on a standalone.
- Check the oil pump and sump fit for your chassis on non Honda swaps.
Break-In and Long-Term Care
- Change oil and filter after the first 500 km.
- Let it warm up fully before using high rpm.
- Keep an eye on oil level. High rpm engines can use a little.
- Use quality oil and change it on time.
- Check valve clearances at regular intervals.
Treat it right and a K20A will rev to redline happily for years. That makes a fair JDM Honda K20A engine price one of the best investments you can make in a Honda build.
K20A Versus Other Engines at a Similar Budget
K20A vs B18C
The Honda B18C is the older legend. It is lighter and simpler, but the K20A makes more power, has a chain and a stronger block. Our Honda B18C engine price guide compares costs.
K20A vs K24A
The K24A has more displacement and torque but does not rev as high. Many builders combine a K24 bottom end with a K20 head. See our Honda K24A post.
K20A vs SR20DET
The Nissan SR20DET is turbo and made for rear wheel drive. The K20A is naturally aspirated and front wheel drive by default. Different engines for different builds.
K20A vs J35A
The Honda J35A V6 has much more torque, but it is heavier and not built to rev like a K20A.
Questions We Hear All the Time
Is it a running engine? Yes. The JDM Honda K20A engine price we list is for a tested, running engine.
Can I see a video? Often, yes. Just ask.
Do you have more than one? Usually. Tell us which version you want.
Will the price change after I pay? No. Your written JDM Honda K20A engine price, with shipping, is final.
More Honda and JDM Engines
Browse our Honda engines and read our JDM engines for sale guide. You might also like the Honda K20A engine for sale guide, the Honda B18C guide, the RB25DET price guide, the SR20DET price guide and our engine and transmission combo page. Or browse the full shop.
Frequently Asked Questions About the JDM Honda K20A Engine Price
What is the JDM Honda K20A engine price right now?
Our tested, fairly used K20A engines start at $3,300. Type R versions, gearboxes and shipping are quoted separately.
Why do Type R engines cost more?
They make more power, rev higher and are in much higher demand. That pushes the JDM Honda K20A engine price up for DC5, EP3 and FD2 engines.
Can I get the 6-speed gearbox too?
Yes, on request. Ask and we will add it to your quote.
Will it fit my EK Civic?
Yes, with K-swap mounts, shifter, axles and wiring. Tell us your car and we will list what you need.
How long does shipping take?
Air takes days. Sea takes a few weeks depending on the route.
Is there a warranty?
Yes, in writing. See our refund and returns policy.
How do I pay?
Bank transfer only.
Get Your K20A Quote
Tell us your car and plans and we will send photos, test results and a written JDM Honda K20A engine price with shipping to your country. Straight answers, a tested engine and a fair deal.
Call +1 (209) 733-0882 or use our contact page. You can also check the K20A product page.