The Hino J05E is a small engine that does a lot of hard work. It powers Hino 155 and 195 box trucks, light Hino Ranger trucks and a big number of 20 ton class excavators. When one fails, the truck or machine stops earning, and the owner wants to know one thing fast: what is the Hino J05E replacement engine cost, all in? This page gives you the engine price, the extras you should plan for and the checks that stop you paying twice.
We sell the Hino J05E. NJ Global Auto Parts keeps tested J05E engines on our Hino J05E engine for sale page, and we ship worldwide. The Hino J05E replacement engine cost with us is $5,400 for the engine, down from $6,500. Send us your engine number and we will match the right engine and quote it delivered. You can also see all our Hino engines.

Table of Contents
Hino J05E Replacement Engine Cost at NJ Global Auto Parts
Our Hino J05E replacement engine cost is $5,400 for a tested engine. Freight is added depending on where it is going, and we send the full figure in writing before you pay.
Each engine is checked before we list it. We look at the oil and coolant for contamination, look for metal, check for heavy blow by, turn the engine over and go through any run data we have. You get the engine number, the suffix code, the miles or hours where we know them and a clear list of what comes with it.
Some engines are complete with the turbo, supply pump, injectors and accessories. Some are long blocks. The DPR filter and other exhaust parts are usually separate, and we tell you plainly what is included.
When you compare sellers, look at the same things. Engine number, suffix, truck or excavator version, what is included and the delivered total. A low Hino J05E replacement engine cost is not low if the engine is from a different machine and your mechanic spends days swapping parts.
What Goes Into the Hino J05E Replacement Engine Cost
The engine is the biggest line, but not the only one. Plan for all of these and there will be no nasty surprises.
The engine
A tested used J05E from us is $5,400. A new or rebuilt engine costs a lot more.
Freight
A dressed J05E weighs around 1,000 to 1,100 pounds. It still needs a crate and proper freight. We include it in every quote.
Labor
Swapping a J05E is usually a one to two day job for a good shop. An excavator can take longer depending on access.
Parts and fluids
Oil, filters, coolant, gaskets, hoses and clamps. Not a big number, but count it.
Setup
Some trucks need the engine computer set up or injector codes entered after the swap. Ask your shop.
Exhaust cleaning
If the old engine was burning oil, the DPR filter may need cleaning.
Add all of this to the engine and you have the true Hino J05E replacement engine cost. For most owners, it is still a small part of what a new truck or machine would cost.
Hino J05E Specifications
| Engine | Hino J05E inline four diesel |
| Years | Mid 2000s to the late 2010s in many markets |
| Displacement | 5.12 liters (313 cubic inches) |
| Configuration | Inline 4, 4 valves per cylinder, overhead camshaft |
| Bore x stroke | 112 mm x 130 mm (4.41 in x 5.12 in) |
| Fuel system | High pressure common rail |
| Aspiration | Turbocharged and intercooled |
| Power range | About 150 to 210 hp depending on version |
| Torque | Up to about 440 lb-ft in truck versions |
| Firing order | 1-3-4-2 |
| Emissions | Cooled EGR, with a DPR filter on later versions |
| Approximate weight | About 1,000 to 1,100 lb dressed |
The J05E is the four cylinder member of Hino’s J series. It shares its bore and stroke with the six cylinder J08E, which is why many parts and service steps are similar. You can read about the maker on the Hino Motors page. Like most modern diesels, it uses exhaust gas recirculation to keep emissions down.
Trucks and Machines That Use the J05E
- Hino 155, 195 and 195h trucks in North America
- Light Hino Ranger and 500 series trucks in other markets
- Box trucks, flatbeds, tow trucks and small dump trucks
- Kobelco SK200-8, SK210-8 and similar 20 ton class excavators
- Other construction and industrial machines
Truck and excavator engines share the same core, but the oil pan, front cover, fan drive, flywheel housing and wiring often differ. Tell us exactly what your engine came out of so the Hino J05E replacement engine cost we quote is for an engine that bolts in.
7 Ways to Keep the Hino J05E Replacement Engine Cost Down
1. Match the suffix code
The letters after J05E on the block tell you the version. J05E-TP is common in trucks. Excavator engines use other codes. Match yours and the swap stays simple.
2. Match truck to truck, machine to machine
A truck engine in a truck and an excavator engine in an excavator saves hours of labor and a pile of parts.
3. Reuse good parts
If your turbo, starter and alternator are good, a long block can save money. Have your mechanic check them first.
4. Get the delivered total
Freight to a far port can add a lot. Compare full totals, not just engine prices.
5. Fix the cause
If the old engine died from overheating, dust or bad fuel, fix that first. Otherwise you pay the Hino J05E replacement engine cost twice.
6. Clean the cooling system
Excavator radiators and oil coolers clog with dust. Clean them properly before the new engine goes in.
7. Buy tested, not cheapest
A tested engine with a known engine number is far safer than a cheap engine with no history.
For more on how engines are checked, see our guide to tested used engines.
Common Hino J05E Problems
EGR valve and cooler
The EGR valve can stick with soot and the cooler can leak. Coolant loss and white smoke are the usual signs.
DPR filter clogging
City delivery trucks that never get a long run fill the filter fast. Regular regens help.
Injectors and supply pump
Dirty fuel and water ruin common rail parts. Keep filters fresh and drain water often.
Overheating in excavators
Blocked radiators and oil coolers are the number one killer of excavator engines. A cracked head or warped head is a common result.
Dust getting past the air filter
A torn intake hose or bad filter seal lets dust in. Dusted engines wear rings and liners fast and burn oil.
Wiring and sensors
Corroded connectors cause many faults. Check them before blaming the engine.
Knowing these helps you plan the job and protect the new engine, which keeps the Hino J05E replacement engine cost from turning into a second bill.
Signs Your J05E Needs Replacing
- A deep knock from the bottom end that gets worse under load
- Coolant in the oil for long enough to damage the bearings
- Heavy blow by and high oil use, often after dust got in
- Low compression on more than one cylinder
- Metal in the oil filter
- A cracked head or block after overheating
If you see these, get a repair quote and compare it with the Hino J05E replacement engine cost. On a high hour excavator or high mile truck, replacement usually comes out ahead once labor and downtime are counted. Send us what your mechanic found and we will give you an honest view.
Repair or Replace, a Worked Example
Take a Kobelco excavator with a J05E that overheated because the radiator was packed with dust. The head is cracked and the engine has been burning oil for a while. Your mechanic quotes a head, gaskets, rings, liners, bearings and a lot of hours.
That job takes the machine out of work for a long time while parts arrive and the engine is rebuilt. Add the labor and the parts and the bill climbs fast.
A tested replacement engine, on the other hand, ships, goes in within a couple of days and the machine is back digging. Once you count downtime, the Hino J05E replacement engine cost is usually the cheaper path when the engine has major damage.
For a smaller problem, like a leaking EGR cooler or a bad injector, repair is the better answer. Not every sick engine needs replacing.
J05E Engines for Excavators
A big share of our J05E buyers run excavators. The machine is usually worth saving. Tracks, boom, hydraulics and cab can all be in good shape while the engine is finished.
Send us the machine make, model and serial number along with the engine number and photos of the old engine from the front, both sides and the back. We can usually match it directly or tell you which parts to move over. That way the Hino J05E replacement engine cost we quote is for an engine that fits your machine.
Reading the J05E Engine Number
The fastest way to get the right engine is a good photo of the engine number. On the J05E it is stamped into the block, usually on the side near the front. The letters after J05E are the suffix, and that is the part we need most.
Engines that have spent years in an excavator are often caked in oil and dirt. Clean the area with degreaser and a wire brush, let it dry, then take the photo straight on in good light. Rubbing chalk over the stamp makes the numbers easier to read.
If you cannot find or read the stamp, send the truck VIN or the machine serial number plate. That is often enough for us to work out which version you need. Getting this right at the start is the cheapest step in the whole job, and it keeps the Hino J05E replacement engine cost where we quoted it.
Downtime Is Part of the Cost
Owners often look only at the engine price and the labor bill. Downtime matters just as much. A delivery truck that sits for three weeks loses three weeks of work. An excavator that sits on a job site can cost you the contract.
That is why so many owners choose a tested used engine over a full rebuild. The rebuild might look close on paper, but it usually takes longer, and every day the truck or machine sits is money lost. When you add up the real Hino J05E replacement engine cost, include what a week of downtime costs your business. It often makes the decision for you.
Tell us how quickly you need the engine and where it needs to go. We will tell you honestly how long freight will take so you can plan the work around it.
What to Expect After the Swap
Once the new engine is in, run it at idle and check for leaks. Then give it an easy first day before you put it under full load. Check the oil and coolant again after the first day of work.
Change the oil and filter early, after the first few hundred hours or a few thousand miles. It is cheap insurance and clears out anything stirred up during the install.
On excavators, check the radiator and air filter more often in the first weeks. If anything seems off, call us early. A small problem caught early stays small, and the money you spent on the Hino J05E replacement engine cost stays well spent.
Used vs Rebuilt vs In-Frame Overhaul
Used engine. Fastest and usually cheapest. A tested engine can be working soon after it arrives.
Rebuilt engine. More money, but new wear parts. Good if you plan to keep the machine many years.
In-frame overhaul. Only possible when the block and crank are good.
For most owners, a tested used engine keeps the Hino J05E replacement engine cost lowest. Our post on replacement engine cost goes deeper.
Questions to Ask Any Seller
- What is the engine number and suffix code?
- Is it a truck engine or an excavator engine?
- What did it come out of, and why?
- Has it been run, and is there a video or test result?
- What exactly is included?
- What is the delivered total, with crating and freight?
- How do I pay, and what paperwork do I get?
We answer every one of these in writing before you pay.
How to Match the Right J05E
- A clear photo of the engine number and suffix on the block
- Truck or machine make, model, year and serial number
- Transmission or pump model
- Which old parts are still good
- Your country and nearest port or city
Send us these and we will match the engine and give you an exact Hino J05E replacement engine cost with freight.
Buying for a Fleet
Rental companies and delivery fleets often run many J05E trucks or excavators. A spare engine ready to go means a breakdown costs days instead of weeks. We can quote two or more engines together and ship them together, which usually lowers freight per engine.
What You Get From Us
- A tested Hino J05E with the engine number recorded
- Photos of the actual engine
- A clear list of what is included
- Miles or hours where we have them
- Proper crating
- Tracking until it arrives
- Honest answers from people who know engines
Read our refund and returns policy and billing terms before you order.
Shipping a J05E Worldwide
We ship engines all over the world. Inside the United States, engines go by freight truck. Overseas, we crate the engine and ship it by sea, and we handle the export paperwork. Air freight is available when the job cannot wait.
Freight is part of the Hino J05E replacement engine cost we quote, so you see the full figure from day one. See our shipping policy for details. Import duties are paid on your side, so check with your customs broker.
Installation Tips for a J05E
- Clean the radiator, oil cooler and intercooler properly
- Flush the cooling system
- Fit new oil and fuel filters and drain water from the fuel system
- Prime the fuel system before the first start
- Check every intake hose and clamp for leaks
- Fit a new air filter
- Check connectors and grounds
- Let it idle and check for leaks before you put it to work
Looking After Your J05E
Change the oil on time. Keep the coolant right. Change fuel filters on schedule and drain water often. Blow out the radiator often on excavators. Check the air filter and intake regularly. Let the DPR regens finish.
Treat it right and the engine will pay back the Hino J05E replacement engine cost many times over.
Other Engines We Sell
See our Hino J05E buying guide, the bigger Hino J08E and the older Hino J08C.
We also sell the Isuzu 6HK1, the Isuzu 4HK1, the Cummins ISL and many more used diesel engines. See them all in our shop.
How to Order
- Send us the engine number photo, your vehicle or machine details and your country.
- We match the engine and send photos, the engine number, miles or hours and what is included.
- We send the full Hino J05E replacement engine cost with freight.
- You pay by bank transfer and get an invoice and order confirmation by email.
- We crate it, ship it and send tracking.
Call +1 (209) 733-0882 or email info@njglobalautoparts.com. First time buying an engine online? Read how buying a used engine online works.
About our prices
The Hino J05E replacement engine cost on this page is what we charge today for a tested engine. Stock changes. A newer or lower hour engine may cost more and an older one may cost less. We always tell you the version, miles or hours and condition of the exact engine we quote.
Frequently Asked Questions
What is the Hino J05E replacement engine cost?
$5,400 for a tested engine from us, down from $6,500. Freight, labor and parts are extra.
Will a truck J05E fit my excavator?
The core is the same but outside parts differ. Matching is easier and cheaper.
Is the J05E the same as the J08E?
Same family and same bore and stroke, but the J05E has four cylinders and the J08E has six.
Does it come with the DPR filter?
Usually not. We tell you exactly what is included.
Do you ship worldwide?
Yes, by road, sea and air.
How do I pay?
By bank transfer, with an invoice and order confirmation by email.
Final Word on the Hino J05E Replacement Engine Cost
A Hino truck or Kobelco excavator with a dead engine is still worth saving. A tested engine keeps the Hino J05E replacement engine cost far below the price of a new truck or machine.
Match the suffix. Match truck to truck or machine to machine. Reuse good parts. Fix whatever killed the old engine. Get the delivered total in writing.
When you are ready, see our Hino J05E engines or send us your engine number photo, and we will send a straight Hino J05E replacement engine cost with shipping to your door.
