People who call us about the Mazda 13B rotary engine price usually fall into two groups. Some have an RX-7 or RX-8 with a tired engine that has lost compression and starts badly when hot. The others want a rotary for a swap because nothing else sounds or revs quite like it. Both want the same two things: a genuine engine and a straight price.
That is what we do. We sell tested, fairly used 13B engines, mostly imported from Japan, and we ship them worldwide. Below you will find our current Mazda 13B rotary engine price, what makes it go up or down, the full specs, the different versions, and the checks we run before any rotary leaves our yard.
Want a number for your car? Call +1 (209) 733-0882 or use our contact page. You can also see stock on the Mazda 13B Rotary Engine for Sale product page.
Table of Contents
Mazda 13B Rotary Engine Price Today
Our current Mazda 13B rotary engine price starts at $4,400 for a tested, fairly used complete engine. The regular price is $5,200, so right now you save $800. That figure is for the engine itself. Gearbox, ECU, wiring loom and freight are added to your quote depending on what you need.
We put the price out in the open on purpose. You should not have to send five messages to find out what an engine costs. Your final Mazda 13B rotary engine price only changes for real reasons, like the version you choose, whether you want the gearbox, and where it is going.
| What you are buying | Typical price from us |
| 13B complete engine (tested, fairly used) | From $4,400 |
| 13B-REW twin turbo engine (FD RX-7) | Quoted on request, usually higher |
| 13B-MSP Renesis engine (RX-8) | Quoted on request |
| Engine plus 5-speed manual gearbox | Quoted on request |
| Engine plus ECU and loom | Quoted on request |
| Sea or air freight | Quoted by destination |
For a rough budget, start at $4,400, add a gearbox if you need one, then add shipping. After that, ask us for the exact Mazda 13B rotary engine price for your car and we will send it in writing.

What Is the 13B?
The 13B is Mazda’s twin rotor Wankel rotary engine. There are no pistons going up and down. Instead, two triangular rotors spin inside oval shaped housings, and each rotor face goes through intake, compression, power and exhaust as it turns. The result is a small, light engine that revs freely and makes a sound people either love or cannot stand.
Mazda built the 13B for decades. It went into the RX-7 in all three generations, the Cosmo, the Luce and finally the RX-8. Along the way it was offered naturally aspirated, with a single turbo and with sequential twin turbos.
It is not a fit-and-forget engine like a big Toyota diesel. It needs the right oil, the right warm-up habits and regular use. But when it is healthy it is a joy, and that keeps the Mazda 13B rotary engine price strong year after year.
13B Specifications
These figures cover the main versions we sell. We confirm the exact version before we finalise any Mazda 13B rotary engine price.
| Engine type | Twin rotor Wankel rotary, petrol |
| Displacement | 1,308 cc (2 x 654 cc chambers) |
| Rotor housings | Aluminium with chrome plated running surface |
| Side housings | Cast iron |
| Compression ratio | About 9.0:1 (turbo) to 10.0:1 (Renesis) |
| Power, 13B-T (FC RX-7) | About 182 to 215 PS |
| Power, 13B-REW (FD RX-7) | About 255 to 280 PS |
| Power, 13B-MSP Renesis (RX-8) | About 192 to 250 PS |
| Torque, 13B-REW | About 294 to 314 Nm |
| Redline | About 8,000 rpm, up to 9,000 rpm on the high power RX-8 |
| Induction | Naturally aspirated, single turbo or sequential twin turbo |
| Lubrication | Wet sump plus metering oil pump that injects oil into the housings |
| Fuel | Premium unleaded |
| Ignition | Two plugs per rotor (leading and trailing) |
The metering oil pump matters. A rotary is meant to burn a little oil, because that oil lubricates the apex seals. If you see a 13B using some oil, that alone is not a fault.
13B Versions and How They Change the Price
The 13B name covers a lot of engines. Which one you pick has a big effect on the Mazda 13B rotary engine price, so here is a plain guide.
13B naturally aspirated (FC RX-7 and earlier)
Simple, fairly cheap to keep and a nice base for a street port. These usually sit at the lower end of what we charge.
13B-T (FC RX-7 Turbo II)
A single turbo version with a twin scroll turbo. Good power for its era and plenty of parts around. Popular with people building a budget turbo rotary.
13B-REW (FD RX-7)
The famous one. Sequential twin turbos, 255 to 280 PS from the factory and a lot more with the right parts. Demand is high and clean ones are getting hard to find, so this version carries the top Mazda 13B rotary engine price.
13B-MSP Renesis (RX-8)
Naturally aspirated, with side exhaust ports instead of peripheral ports. Better emissions, sharp response and very high revs. A good choice if you own an RX-8 and want a direct replacement.
Not sure which one suits your car? Send us the chassis and what you want to do with it, and we will point you to the right engine.
What Affects the Mazda 13B Rotary Engine Price?
1. Version
REW twin turbo engines cost the most. NA FC engines and Renesis engines usually cost less.
2. Compression
This is the big one for rotaries. We test every face of both rotors with a rotary specific gauge and send you the numbers. Strong, even compression is what you are really paying for.
3. What comes with it
Our complete engines include the intake, turbos where fitted, and most ancillaries. Add the ECU, loom or gearbox and the total goes up.
4. Gearbox
A five speed manual from an FD or FC is often wanted for swaps. We can quote it with the engine.
5. Shipping
Sea freight is the cheaper route. Air is faster and costs more. Both are on the quote.
6. Market demand
Good FD RX-7s keep climbing in value, and that pulls the Mazda 13B rotary engine price up with them.
Why Buyers Choose Us for Their 13B
- Real photos of the exact engine you will get.
- Compression numbers for all six rotor faces before you pay.
- Engine number recorded and shown in the photos.
- Version confirmed, so you know if it is a REW, a 13B-T or a Renesis.
- Written quote with the full Mazda 13B rotary engine price and shipping.
- Written warranty on every engine.
- Worldwide shipping with tracking.
You can read how we test in our tested used engines guide, and how we grade mileage in our low mileage used engines post.
Which Cars Came With the 13B?
- Mazda RX-7 SA and FB (13B in some markets late on)
- Mazda RX-7 FC, NA and Turbo II
- Mazda RX-7 FD with the 13B-REW
- Mazda RX-8 with the 13B-MSP Renesis
- Mazda Cosmo and Luce (Japan)
If your car came with a 13B and the engine is done, a straight replacement is the fastest way back on the road. In most cases the Mazda 13B rotary engine price for a tested replacement is close to, or lower than, a proper rebuild once you add seals, housings and labour.
Popular 13B Swaps
Mazda MX-5 (Miata)
A 13B in an MX-5 is light, balanced and very fast. Mounts, cooling and the gearbox take some thought, but plenty have been done.
Older Mazdas (RX-2, RX-3, 808)
Classic rotary owners often fit a 13B in place of the original 10A or 12A for more power with the same character.
Kit cars and track builds
The size and weight of a 13B make it a favourite for small track cars. It sits low and far back, which helps handling.
RX-8 into FD or FD into RX-8
People mix parts between generations all the time. It can be done, but the wiring and ECU need planning.
When you ask us for a Mazda 13B rotary engine price for a swap, tell us the target car. We will tell you which version suits it and what else you will need.

13B Problems to Know About
Apex seal wear
This is the one everyone has heard of. Apex seals sit on the tips of the rotors. When they wear or crack, compression drops on one or more faces and the engine gets hard to start, especially hot. This is exactly why we test every face.
Coolant seal failure
Common on 13B-REW engines that have overheated. Coolant gets into the combustion chamber, and you see white smoke on start-up. We check for signs of this before we price an engine.
Overheating
The FD in particular runs hot in stock form. A good radiator and fresh coolant hoses go a long way.
Flooding
RX-8 engines can flood if they are started and shut off cold. It is a habit problem more than an engine problem, but it causes plenty of false alarms.
Vacuum hose mess on twin turbo engines
The REW has a lot of small vacuum hoses that harden with age. Many owners simplify the system during install. Ask us if you want advice.
7 Checks Before You Pay a Mazda 13B Rotary Engine Price
- Get rotary compression numbers. A normal piston gauge will not do. You want readings for all six faces.
- Get the engine number stamped on the housing.
- Confirm the version. 13B NA, 13B-T, 13B-REW or Renesis.
- Check for coolant in the chambers. White smoke or a sweet smell are bad signs.
- List what is included. Turbos, intake, alternator, starter, oil metering pump.
- Get the warranty in writing.
- Get the full Mazda 13B rotary engine price in writing including shipping.
We do all seven by default. If another seller will not, ask yourself why.
How We Test a 13B
Before any rotary gets a Mazda 13B rotary engine price on our site, it goes through the same routine.
- Visual check for cracks, damage, missing parts and signs of an old rebuild.
- Rotary compression test on every face, with readings saved.
- Coolant and oil check for mixing, metal or burnt smells.
- Hand rotation of the eccentric shaft to feel for binding.
- Turbo check on turbo engines for shaft play and oil leaks.
- Engine number and version confirmed and added to your quote.
Engines that fail are not sold as running engines. That testing is a big part of what you pay for.
A Bit of History
Mazda started selling rotary cars in the 1960s and stuck with the idea when most other carmakers gave up on it. The 13B arrived in the 1970s and was improved again and again. The FC RX-7 made it popular, the FD RX-7 made it famous, and the RX-8 kept it alive until production ended in 2012.
Mazda also won Le Mans in 1991 with a four rotor car, which only added to the legend. Since no new 13B engines are being made, good used ones are what everyone is chasing now. That simple fact holds the Mazda 13B rotary engine price up.
Which 13B Should You Buy?
Direct replacement. Match what your car came with. It is the cheapest and simplest route.
Big power build. A 13B-REW or 13B-T is the base most people use for a big single turbo setup.
Light, high revving fun. The Renesis is a great choice in an RX-8 or a light swap car.
Budget swap. An NA 13B keeps costs down and is easy to live with.
Tell us your plans. We would rather sell you the right engine at a fair Mazda 13B rotary engine price than push you into the most expensive one.
Living With a Rotary Day to Day
We get a lot of first time rotary owners, so here is the honest version. A 13B is not hard to own, but it does not forgive bad habits the way some engines do.
Warm it up properly. Give it a minute or two before driving off, and do not rev it hard until the temperature gauge is up.
Do not start it and shut it off cold. This floods the engine, especially on an RX-8. If you move it in the driveway, let it warm up before turning it off.
Use it. A rotary that sits for months is more likely to have problems than one that is driven every week.
Rev it out now and then. Once it is warm, a few runs to high rpm help clear carbon. Old rotary hands call this the “Italian tune up” and there is truth in it.
Keep an eye on oil. Check the level often. It is meant to use some, so top it up.
Do these things and a healthy 13B will last a long time. That is when the Mazda 13B rotary engine price you paid starts to look like good value.
Rebuild or Replace?
A proper rotary rebuild means apex seals, side seals, corner seals, coolant seals, bearings and often new housings if the old ones are worn. Rotor housings are not cheap, and a good rotary builder charges for skill. Once you add it all up, it often sits close to the Mazda 13B rotary engine price for a tested replacement.
A replacement also gets you driving sooner. For a street car, replacing is usually the smarter call. For a full race build with porting and custom seals, a rebuild by a specialist may suit you better.
New to buying an imported engine? Our guide on how to buy a used engine online covers the basics.
Budget for the Whole Job
A fair Mazda 13B rotary engine price is only one part of the cost. Also plan for:
- Spark plugs, leads and coils
- Radiator, hoses and fresh coolant
- Engine mounts for your chassis
- ECU and loom, or a standalone ECU
- Fuel pump and injectors for your power goal
- Clutch and flywheel
- Oil, filters and gaskets
We can supply the engine with gearbox, ECU and loom. Ask for a package quote and we will list each item.
How to Order
- Send your details. Car, year, and whether it is a replacement or a swap. Use our contact page or call +1 (209) 733-0882.
- Get your quote. Photos, compression results, engine number and a written Mazda 13B rotary engine price with shipping.
- Pay by bank transfer. It is the only method we accept. See our billing terms.
- We ship. Drained, sealed, strapped down and tracked. See our shipping policy.
- Install and enjoy.
Worldwide Shipping
We ship 13B engines to the Americas, Europe, Africa, the Middle East, Asia and Oceania. Freight is on your quote, so the Mazda 13B rotary engine price you agree to covers getting the engine to you.
Sea freight is the usual choice. Air is there when you are in a hurry. Both come with tracking. Import duty and local taxes are paid by the buyer when the engine arrives.
Install Tips
- Fit new plugs before first start. Rotary plugs are specific, so use the right ones.
- Prime the oil system and pre-oil the housings with a little two stroke oil or rotary assembly lube.
- Check the oil metering pump lines are connected and not cracked.
- Bleed the cooling system carefully. Air pockets cause hot spots.
- Replace old vacuum lines on twin turbo engines.
- Use the correct ECU for your version.
Break-In and Long-Term Care
- Change oil and filter after the first 500 km.
- Use a good mineral or semi synthetic oil that suits rotaries.
- Keep boost stock until the engine has settled in.
- Watch water temperature closely, especially in hot weather.
- Let turbo engines idle for a minute after hard driving.
13B Versus Other Engines at a Similar Budget
13B vs SR20DET
The Nissan SR20DET is a piston engine with more torque down low and simpler upkeep. The 13B is lighter and revs higher. See our JDM SR20DET engine price guide.
13B vs RB25DET
The Nissan RB25DET engine price guide covers a heavier straight six with more torque. It suits bigger cars.
13B vs 2JZ
The Toyota 2JZ-GTE is the king of big power, but it is far heavier. In a light car the 13B often feels livelier.
13B vs 4G63T
Read our Mitsubishi 4G63T engine price guide if you want an iron block turbo four instead.
Questions We Hear All the Time
Is it a running engine? Yes. The Mazda 13B rotary engine price we list is for a tested engine with compression recorded.
Can I get a video? Often, yes. Just ask.
Do you have REW engines in stock? Sometimes. They sell quickly, so ask early.
Will the price change after I pay? No. The written price with shipping is final.
More JDM Engines and Price Guides
Browse our used engines and read the JDM engines for sale guide. You might also like our Mazda 13B rotary engine for sale guide, the Honda B18C engine price guide, the Subaru EJ25 replacement engine cost guide, the Toyota 2ZR-FE engine price guide and our engine and transmission combo page. Or browse the full shop.
Frequently Asked Questions About the Mazda 13B Rotary Engine Price
What is the Mazda 13B rotary engine price right now?
Our tested, fairly used 13B engines start at $4,400. REW engines, gearboxes and shipping are quoted separately.
Why do 13B-REW engines cost more?
Twin turbos, the FD’s fame and limited supply. That pushes the Mazda 13B rotary engine price up for those units.
How long does a 13B last?
Looked after properly, many go well past 100,000 km. Warm-up habits and cooling make a big difference.
Do you send compression numbers?
Yes, for every face, before you pay.
Is there a warranty?
Yes, in writing. See our refund and returns policy.
How do I pay?
Bank transfer only.
Get Your 13B Quote
Tell us your car and plans and we will send photos, compression results and a written Mazda 13B rotary engine price with shipping to your country. A tested engine, a fair price and straight answers.
Call +1 (209) 733-0882 or use our contact page. You can also check the 13B product page.