WhatsApp: +1 209 690 5983

Hino J08E engine price

Hino J08E Engine Price: 7 Proven Checks Before You Buy

The Hino J08E does a lot of quiet, steady work. It runs box trucks, dump trucks, tow trucks, refuse trucks and a good number of excavators. Most owners never think about it until the day it stops. When that happens, the first question is usually about the Hino J08E engine price, and the second is whether a used engine is a safe bet. This page covers both, in plain words, from people who sell these engines every week.

We sell the Hino J08E. NJ Global Auto Parts has tested J08E engines on our Hino J08E engine for sale page, and we ship worldwide. Our Hino J08E engine price today is $6,500, down from $7,800. Send us your engine number and we will match the right engine and quote it delivered. You can also look through all our Hino engines.

Hino J08E engine price
Tested Hino J08E 7.7L inline six diesel for trucks and equipment, shipped worldwide.

Hino J08E Engine Price at NJ Global Auto Parts

Our Hino J08E engine price is $6,500 for a tested engine. Freight is added depending on where the engine is going, and we send the full figure in writing before you pay.

Every engine is checked before it is listed. We look at the oil and coolant for contamination, look for metal, check for heavy blow by, turn the engine over and go through any run data we have. You get the engine number, the suffix code, the miles or hours where we know them and a straight list of what comes with it.

Some engines come with the turbo, injection pump, injectors and most accessories. Some are long blocks. The DPR filter and other exhaust parts are usually separate, and we will tell you plainly what is included.

When you shop around, compare like with like. Engine number, suffix code, truck or equipment version, what is included and the delivered total. A low Hino J08E engine price is not a deal if the engine is the wrong version and needs a pile of parts to fit.

What Changes the Hino J08E Engine Price

The suffix code

The J08E comes in many versions, shown by the letters after the name. J08E-TA, J08E-TB, J08E-UV, J08E-VB, J08E-VC, J08E-WU and others. Each one can have a different rating, turbo, injection setup and emissions level. Matching your suffix is the easiest way to a simple swap.

Truck or equipment engine

The J08E is used in trucks and in excavators and other machines. Equipment engines often have different oil pans, front covers, flywheel housings and wiring. A truck engine for a truck is the easy swap.

Emissions level

Newer J08E engines use cooled EGR and a DPR particulate filter, and some later truck engines added SCR. Older engines have less hardware. Your vehicle needs the level it was built with.

Miles or hours

Lower miles or hours cost more. A well kept engine with records can still be the better buy.

How complete it is

A dressed engine costs more than a long block. Count what you can reuse from your old engine.

Freight

A dressed J08E weighs around 1,500 pounds. Shipping it still takes proper crating. We include freight so the Hino J08E engine price you see is the full total.

Hino J08E Specifications

EngineHino J08E inline six diesel
YearsEarly 2000s to the late 2010s in many markets
Displacement7.68 liters (469 cubic inches)
ConfigurationInline 6, 4 valves per cylinder, overhead camshaft
Bore x stroke112 mm x 130 mm (4.41 in x 5.12 in)
Fuel systemHigh pressure common rail
AspirationTurbocharged and intercooled
Power rangeAbout 220 to 300 hp depending on version
TorqueAbout 520 to 660 lb-ft in common truck ratings
Firing order1-4-2-6-3-5
EmissionsCooled EGR on most versions, DPR filter on later versions
Approximate weightAbout 1,500 lb dressed

The J08E came from Hino, the truck maker in the Toyota group. You can read about the company on the Hino Motors page. The engine uses a common rail fuel system, which is quiet and efficient but needs clean fuel.

The J08E has a good name for being tough and economical in medium duty work. That is a big part of why the Hino J08E engine price stays steady even for older engines.

Trucks and Equipment That Use the J08E

  • Hino 258, 268 and 338 trucks in North America
  • Hino Ranger and 500 series trucks in many markets
  • Hino FD, FE, FG, FL and GH trucks
  • Box trucks, dump trucks, tow trucks and refuse trucks
  • Kobelco excavators and other construction machines
  • Buses and special vehicles in some markets

You can read about the truck on the Hino Ranger page. Tell us exactly what your engine came out of so the Hino J08E engine price we quote is for an engine that fits it.

J08E or J08C?

The J08C is the older Hino 8 liter engine. It uses a mechanical injection pump in most versions and has less electronics. The J08E replaced it with common rail injection and electronic control.

They are not a simple swap. Wiring, the fuel system and many outside parts are different. If your truck had a J08E, buy a J08E. If it had a J08C, see our Hino J08C page.

Why Owners Replace the Engine and Keep the Truck

A Hino medium truck with a good body, bed or crane on it is worth a lot more than the chassis alone. A new truck means paying for all of that again. A tested engine at a fair Hino J08E engine price puts the same truck back to work for much less, often in days.

Excavator owners think the same way. A machine with good hydraulics, tracks and a good cab is worth saving. The engine is the part that failed, so the engine is the part to replace.

Common Hino J08E Problems

Every engine has its weak spots. These are the ones we look out for, and the ones you should ask about before you agree on a Hino J08E engine price.

EGR valve and cooler

The EGR valve can stick and the cooler can leak. Coolant loss with no outside leak and white smoke are the usual signs.

DPR filter clogging

Trucks on short city routes fill the DPR filter faster. Forced regens help, but a badly clogged filter needs cleaning. You can read how a diesel particulate filter works if you want the background.

Injectors and supply pump

The common rail system hates dirt and water. Bad fuel wears injectors and the supply pump fast. Keep the filters fresh.

Overheating

Dirty radiators on dump trucks and excavators cause a lot of failures. A blocked radiator can crack a head or warp it.

Turbo wear

Blue smoke and oil in the intake point to a worn turbo.

Wiring and sensors

Corroded connectors and failed sensors cause many running problems. Check them before blaming the engine.

These are known problems with known fixes. Knowing them helps you judge whether a Hino J08E engine price is fair for the engine in front of you.

7 Checks Before You Pay the Hino J08E Engine Price

1. Get the engine number and suffix

Both are stamped on the block. Send us a clear photo and we will match your vehicle.

2. Confirm truck or equipment version

Tell us what the engine came out of. Equipment engines differ on the outside.

3. Look at the oil and coolant

No milky oil, no oil in the coolant and no metal.

4. Ask about blow by

Heavy blow by means worn rings or liners.

5. Ask for a run video or test results

Seeing it run tells you a lot. We share what we have.

6. Get a list of what is included

Turbo, supply pump, injectors, starter, alternator, harness and flywheel. Write it down.

7. Get the delivered price in writing

The Hino J08E engine price, plus crating, plus freight. One total, in writing, before you pay.

Read how engines are checked in our guide to tested used engines.

Signs Your J08E Needs Replacing

  • A deep knock from the bottom end that gets worse under load
  • Coolant in the oil for long enough to damage the bearings
  • Heavy blow by and high oil use
  • Low compression on several cylinders
  • Metal in the oil filter
  • A cracked head or block after overheating

If you see these, get a repair quote and compare it with a tested engine at a fair Hino J08E engine price. On a high mile or high hour engine, replacement usually wins. Send us what your mechanic found and we will give you an honest view.

J08E Engines for Excavators

Many of our J08E buyers run excavators, not trucks. The core engine is the same, but the outside parts are often different. Oil pans, front covers, fan drives, flywheel housings and wiring change from machine to machine.

If your engine is from an excavator, send us the machine make, model and serial number along with the engine number and photos of the old engine. We can often match it directly, or tell you which parts to move over. That way the Hino J08E engine price we quote is for an engine that suits the machine.

Excavator engines live in dusty, hot conditions. When you fit a new one, clean the radiator and oil cooler properly and check the air intake for any leaks. Dust that gets past the air filter kills engines faster than almost anything else.

Reading the J08E Suffix Code

People often send us a photo of the engine and ask which J08E it is. The answer is in the letters stamped after J08E on the block. Those two letters tell you the version, and the version decides the rating, turbo, fuel system details and emissions parts.

You do not need to know what every code means. You just need to read it off your old engine and send it to us. If the stamp is hard to read, clean the area with a wire brush and some degreaser, then take the photo in good light from straight on. A chalk rub across the numbers helps too.

If you cannot find the stamp at all, send the truck VIN or the machine serial number. That is often enough for us to work out which engine you need.

Getting the code right matters more than anything else on a J08E swap. A matching engine bolts in and runs. A near match can turn into days of extra work.

What to Expect After the Swap

Once the new engine is in, give it a short settling period. Run it at idle, check for leaks, then take it for an easy drive before you load it up. Check the oil and coolant levels again after the first day of work.

Change the oil and filter early, at around the first few hundred hours or a few thousand miles. It is cheap insurance and clears out anything stirred up during the install.

Keep an eye on the dash for warning lights in the first weeks and deal with any small leak right away. If anything seems off, call us. We would rather hear about it early than late.

Used vs Rebuilt vs In-Frame Overhaul

Used engine. Fastest and usually cheapest. A tested engine can be working soon after it arrives.

Rebuilt engine. More money, but new wear parts. Good if you plan to keep the vehicle for many years.

In-frame overhaul. Only possible when the block and crank are good.

For most owners, a used engine at a fair Hino J08E engine price is the practical choice. Our post on replacement engine cost has more on this.

The Full Cost of a J08E Swap

  • Labor to remove the old engine and fit the new one
  • Oil, filters, coolant and fuel filters
  • Gaskets and seals for the intake, exhaust and coolant
  • Hoses and clamps
  • Moving parts over from your old engine
  • Setting up the engine computer if needed
  • Cleaning the DPR if the old engine fouled it

Add these to the Hino J08E engine price and you have the real total. It is still a small part of what a new truck or machine costs.

Questions to Ask Any Seller

  • What is the engine number and suffix code?
  • Is it a truck engine or an equipment engine?
  • What did it come out of, and why was it removed?
  • Has it been run, and is there a video or test result?
  • What exactly is included?
  • What is the delivered total, with crating and freight?
  • How do I pay, and what paperwork do I get?

We answer every one of these in writing before you pay.

Buying for a Fleet

Delivery and rental fleets often run many Hino trucks. A spare engine on the shelf keeps a route running while a failed engine is swapped. We can quote two or more engines together and ship them together, which usually brings the freight per engine down and makes the Hino J08E engine price better for each one.

How to Match the Right J08E

  • A photo of the engine number and suffix stamped on the block
  • Vehicle or machine make, model, year and serial number
  • Transmission model
  • Which old parts are still good
  • Your country and nearest port or city

Send us these and we will match the engine and give you an exact Hino J08E engine price with freight.

What You Get From Us

  • A tested Hino J08E with the engine number recorded
  • Photos of the actual engine
  • A clear list of what is included
  • Miles or hours where we have them
  • Proper crating
  • Tracking until it arrives
  • Honest answers from people who know engines

Read our refund and returns policy and billing terms before you order.

Shipping a J08E Worldwide

We ship engines all over the world. Inside the United States, engines go by freight truck. Overseas, we crate the engine and ship it by sea, and we handle the export paperwork. Air freight is available when time matters most.

Freight is included in the Hino J08E engine price we quote. See our shipping policy for more. Import duties are paid on your side, so check with your customs broker.

Installation Tips for a J08E

  • Flush the radiator and cooling system first
  • Fit new oil and fuel filters and drain water from the fuel system
  • Prime the fuel system properly before the first start
  • Check the intercooler and pipes for oil and leaks
  • Clean or replace the air filter and check the intake
  • Check connectors and grounds
  • Let it idle and check for leaks before you put it to work

Looking After Your J08E

Change the oil on time with a good diesel oil. Keep the coolant right. Change fuel filters on schedule and drain water often. Keep the radiator clean, especially on dump trucks and excavators. Let the DPR regens finish. Watch your temperatures.

Look after it and the engine will pay back the Hino J08E engine price many times over.

Other Engines We Sell

See our Hino J08E buying guide and the smaller Hino J05E.

We also sell the Isuzu 6HK1, the Isuzu 6HE1, the Cummins ISL, the Caterpillar C7 and many more used diesel engines. See them all in our shop.

How to Order

  1. Send us the engine number photo, your vehicle details and your country.
  2. We match the engine and send photos, the engine number, miles or hours and what is included.
  3. We send the total Hino J08E engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. First time buying an engine online? Read how buying a used engine online works.

About our prices

The Hino J08E engine price on this page is what we charge today for a tested engine. Stock changes. A newer or lower mile engine may cost more and an older one may cost less. We always tell you the version, miles and condition of the exact engine we quote.

Frequently Asked Questions

What is your Hino J08E engine price?

$6,500 for a tested engine, down from $7,800. Freight is added and confirmed before you pay.

Will an excavator J08E fit my truck?

The core is the same but outside parts differ. Matching is easier.

Can I swap a J08C for a J08E?

Not simply. The fuel system and wiring are different.

Does it come with the DPR filter?

Usually not. We tell you exactly what is included.

How long will a used J08E last?

Looked after, many keep working for a long time.

Do you ship worldwide?

Yes, by road, sea and air.

How do I pay?

By bank transfer, with an invoice and order confirmation by email.

Final Word on the Hino J08E Engine Price

A good Hino truck or excavator with a dead engine is worth saving. A tested engine at a fair Hino J08E engine price is the quickest and cheapest way to get it working again.

Get the engine number and suffix. Confirm truck or equipment version. Check the fluids and blow by. Know what is included. Get the delivered total in writing.

When you are ready, see our Hino J08E engines or send us your engine number photo, and we will send a straight Hino J08E engine price with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983