WhatsApp: +1 209 690 5983

Used Cat C13 engine price

Used Cat C13 Engine Price: 7 Proven Checks Before You Pay

When a C13 goes down in a truck that earns money every day, nobody wants a long story. You want a fair used Cat C13 engine price, an engine that will actually run, and a delivery date. Caterpillar stopped building on-highway truck engines years ago, so new C13 truck engines are not something you can just order from a dealer anymore. That makes a good used engine the most practical way to keep a Kenworth, Peterbilt or Freightliner working. We sell them, and this guide explains what you are paying for and what to check before you hand over any money.

We sell the Cat C13. NJ Global Auto Parts has tested Caterpillar C13 engines on our Caterpillar C13 engine for sale page, and we ship worldwide. Our used Cat C13 engine price today is $9,800. Send us your engine serial number and we will match the right engine and quote the delivered price. You can also browse all our Caterpillar engines.

Used Cat C13 engine price
Tested Caterpillar C13 12.5L inline six diesel for trucks and equipment, shipped worldwide.

Used Cat C13 Engine Price at NJ Global Auto Parts

Our used Cat C13 engine price is $9,800 for a tested engine, marked down from $11,500. Freight is added based on where you are, and we confirm it in writing before you pay.

Each engine is checked before it ships. We look at the oil and coolant, check for metal, look for signs of heavy blow by, turn it over and review run or compression data where we have it. We tell you the miles or hours, the serial number and what comes with the engine. Some are complete with the turbo, ECM and accessories. Some are long blocks.

If you are comparing sellers, ask each one for the serial number, what is included and the delivered total. A low used Cat C13 engine price is no bargain if it is the wrong arrangement for your truck or arrives with parts missing.

What Moves the Used Cat C13 Engine Price

Truck or industrial

The C13 was built for trucks and for off-highway use. Industrial and generator engines often have different front covers, oil pans, flywheel housings and wiring. A truck engine for a truck is the easy swap. That is why truck engines with a clean history tend to carry a higher used Cat C13 engine price.

Year and emissions level

Engines from 2004 to 2006 do not have a diesel particulate filter. Engines from 2007 to 2010 were built to tougher emissions rules and work with an aftertreatment system. Your truck needs the same type it came with, so year matters.

Horsepower rating

The C13 came in many ratings. A higher horsepower engine may cost more. The ECM software can sometimes be changed, but the hardware should still match what your truck needs.

Miles or hours

Lower miles cost more, which is fair. But a C13 with good service records and higher miles can be the better buy over a lower mile engine that sat or was abused.

How complete it is

A dressed engine with the turbo, ECM, compressor, starter and wiring costs more than a long block. If your old parts are damaged, a complete engine usually works out cheaper.

Freight

A C13 weighs well over a ton once it is dressed. Shipping it costs real money, especially overseas. We add freight to the quote so your used Cat C13 engine price is the full number.

Caterpillar C13 Specifications

EngineCaterpillar C13 ACERT inline six diesel
On-highway yearsAbout 2004 to 2010, with industrial versions built longer
Displacement12.5 liters (763 cubic inches)
ConfigurationInline 6, 4 valves per cylinder, single overhead cam
Bore x stroke130 mm x 157 mm (5.12 in x 6.18 in)
Fuel systemMEUI, mechanically actuated electronically controlled unit injectors
TechnologyCaterpillar ACERT emissions system
Truck power rangeAbout 305 to 470 hp depending on rating
Truck torque rangeUp to about 1,650 lb-ft depending on rating
Firing order1-5-3-6-2-4
AspirationTurbocharged and air to air aftercooled
AftertreatmentNo DPF on most 2004 to 2006 engines, DPF on 2007 and later engines

The C13 sits between the smaller C7 and C9 and the bigger C15. It is lighter than a C15 and a good match for regional haul, vocational trucks and heavy pickup and delivery work. Caterpillar used its ACERT approach to meet emissions rules without the cooled EGR that other makers used at the time. You can read how its injection works on the unit injector page, and about the company on the Caterpillar Inc. page.

Trucks and Equipment That Use the C13

The C13 went into a lot of trucks during its years on the highway. Common ones include:

  • Kenworth T800, W900, T660 and T600
  • Peterbilt 379, 385, 386 and 387
  • Freightliner Columbia, Century Class and Coronado
  • International 9000 series trucks
  • Western Star trucks
  • Dump trucks, mixers and other vocational trucks

Off the highway, C13 engines power wheel loaders, excavators, compactors, generator sets and pumps. The core engine is similar, but many outside parts are different. Tell us exactly what the engine came out of so we can quote the right used Cat C13 engine price for the right engine.

Why Fleets Still Buy the C13

Plenty of owner operators and small fleets run older trucks on purpose. They are paid off, simple to work on compared with newer trucks, and in many places they avoid the newest emissions systems. A C13 truck in good shape still does a full day of work.

When the engine fails in a truck like that, a replacement makes more sense than a new truck. A good used engine at a fair used Cat C13 engine price costs a small fraction of a new tractor, and the truck goes back to work in days instead of months.

The C13 also has a solid name for running a long time with normal care. Many trucks pass a million miles with in-frame work along the way.

C13 or C15, which do you need?

Some owners ask whether they should move up to a C15 while the truck is down. If you pull heavy loads over mountains every day, a C15 gives you more power and torque. But it is heavier, it costs more, and it does not drop into a C13 truck without changes to mounts, cooling, wiring and sometimes the transmission. For most C13 trucks, the smart move is another C13. You keep the swap simple and the used Cat C13 engine price is lower than a C15 plus all the extra parts.

If your truck came with a C15 and you are thinking of going down to a C13 to save money, the same rule works the other way. The changes cost money and time. Stay with what the truck was built for unless you have a very good reason.

Owner operators and fleets buy differently

An owner operator usually cares about one truck and wants it back on the road this week. Price matters, but so does knowing the engine is right the first time. For that buyer, a complete engine with the ECM and turbo often makes the most sense even if the used Cat C13 engine price is a bit higher, because it means fewer surprises during the swap.

A fleet with its own shop often has spare parts on the shelf and mechanics who know the C13 well. A long block can be the better buy there. They move over the turbo, compressor and accessories, and the lower used Cat C13 engine price for a long block saves real money across several trucks.

Either way, tell us how you work. We will suggest the engine package that keeps your total cost down, not just the sticker price.

What a fair price looks like

Be careful with a used Cat C13 engine price that looks far below everyone else. Very cheap engines are often industrial units sold as truck engines, engines with unknown history, or engines with cracked heads that were never checked. Ask for the serial number and photos of the actual engine, and ask how it was tested. A seller with nothing to hide will answer without trouble. Compare a few honest quotes and the used Cat C13 engine price that sits in the middle with clear answers is usually the safe choice.

Common Cat C13 Problems

Knowing what goes wrong helps you check a replacement and helps you fix the cause on your truck.

Blow by and oil use

Worn rings and liners show up as heavy blow by and rising oil use. It is one of the first things to look at on any used C13.

Injector and cup problems

Worn injectors cause rough running, smoke and poor fuel mileage. Leaking injector cups can let coolant or fuel go where it should not.

Coolant in the oil

An oil cooler leak, a cracked head or a failed liner seal can mix fluids. Always check the oil and coolant on a replacement engine.

Turbo wear

A worn turbo means smoke, oil in the intake and low power. It can also send debris into the engine if it comes apart.

Emissions system trouble

On 2007 and later engines, a clogged DPF or a faulty sensor can cause low power and derates. That is not an engine failure, so do not let it push you into paying a used Cat C13 engine price you do not need to pay.

7 Checks Before You Pay the Used Cat C13 Engine Price

  1. Confirm the old engine is really done. A blow by test, oil analysis and compression check can tell you if an in-frame overhaul would do the job instead.
  2. Get the serial number and arrangement number. These tell you exactly what the engine was built for.
  3. Match truck to truck. An industrial C13 can work, but it takes more parts and labor.
  4. Match the emissions year. A 2007 truck needs a 2007 style engine and aftertreatment.
  5. Ask what is included. ECM, turbo, air compressor, starter, alternator and harness all change the used Cat C13 engine price.
  6. Look at the fluids and the blow by. These say more about the engine than the mileage does.
  7. Read the warranty. Ours is on our used engine warranty page.

Truck Engine vs Industrial Engine

We get asked this a lot. Can an industrial C13 from a loader or a generator go into a truck? The short answer is yes, with work. The block and internals are closely related, but the front of the engine, the oil pan, the flywheel housing, the wiring and the ECM software may all need to change. By the time you buy those parts and pay for the labor, the cheaper engine is often not cheaper anymore.

For a truck, buy a truck engine. For a machine, buy the matching industrial engine. That keeps your total cost down and the job simple. We can quote both, and we will tell you plainly which one makes sense for your setup.

Used vs Rebuilt vs In-Frame Overhaul

Used means the engine came from another truck or machine and was tested. It is usually the fastest way back to work.

Rebuilt means the engine was taken apart and worn parts were replaced, often with new liners, pistons, rings and bearings. Quality depends on the shop.

In-frame overhaul means the shop rebuilds your engine while it stays in the truck. It is a good option if the block and head are healthy, but it will not fix a cracked block or a badly damaged crank.

When the old block is damaged, a tested used engine at a fair used Cat C13 engine price is usually the better choice. Read our guide on rebuilt vs used engines and long block vs short block for more help deciding.

The Full Cost of a C13 Swap

Tested used C13 engine$9,800 from us
FreightQuoted to your address before you pay
LaborOften 20 to 35 hours for a truck swap, depending on the shop
Gaskets, hoses and fluidsCoolant, oil, filters, hoses and clamps
Parts moved overAnything not included with the engine
ECM programmingSometimes needed to match your truck

Shop rates differ a lot by country, so ask for a written quote. Our page on replacement engine cost explains how most shops price engine swaps. Even with labor added, the used Cat C13 engine price plus installation is a small part of what a new truck costs.

How to Match the Right C13

The engine data plate is your best friend. It shows the serial number and the arrangement number. Send us a clear photo of the plate. If the plate is gone, the serial number is also stamped on the block, and the ECM can give the details if it still works.

Tell us the truck make and model, the year, the horsepower rating and the transmission. With that, we can match the engine and give you an exact used Cat C13 engine price that covers what you actually need.

What You Get From Us

  • A tested engine with known miles or hours
  • The serial number before you buy
  • Photos of the actual engine on request
  • A written list of included parts
  • Freight quoted before you pay
  • Secure crating or pallet mounting
  • A written warranty

See how we test on our tested used engines page, and read our refund and returns policy.

Shipping a C13 Worldwide

We ship worldwide. In North America, a C13 goes by flatbed or dry van freight to a shop or terminal. Overseas, it usually goes in a container by sea. Air freight is possible but costly for an engine this heavy.

We drain the fluids, cap every opening and bolt or strap the engine to a skid before it leaves. You get tracking once it ships. Import duties and local taxes are set by your country and come on top of the used Cat C13 engine price, so ask your customs broker early. See our shipping policy for more.

Installation Tips for a C13

  • Clean the cooling system and use the correct coolant.
  • Check the radiator and charge air cooler for leaks and blockage.
  • Inspect the air intake from the filter to the turbo. Dirt will kill an engine fast.
  • Prime the oil and fuel systems before the first start.
  • Program the ECM to match your truck if needed.
  • Check the aftertreatment on 2007 and later trucks before blaming the engine for low power.
  • Do an early oil change and an oil sample after the first few thousand miles.

Need a transmission as well? We sell used transmissions and engine and transmission combos.

Looking After Your C13

Change the oil and filters on time, and use oil sampling if you can. A lab report will warn you about coolant or fuel in the oil long before it causes damage.

Keep the air filter clean and the intake sealed. Keep the coolant at the right mix. Avoid long idling, which leads to wet stacking and carbon. Let the engine cool down for a minute or two after a hard run.

Simple care like this makes the used Cat C13 engine price you paid stretch over many more miles.

Other Heavy Duty Engines We Sell

For more on this engine, read our Caterpillar C13 buying guide. If you need a bigger engine, see the Caterpillar C15 and the Caterpillar 3406E. For a smaller Cat, look at the Caterpillar C7.

We also sell the Cummins ISX15, the Cummins N14, the Detroit Series 60 and many other used diesel engines.

How to Order

  1. Send us a photo of the engine data plate, your truck details and your country.
  2. We match the engine and send photos, the serial number, miles and what is included.
  3. We send the total used Cat C13 engine price with freight.
  4. You pay by bank transfer and get an invoice and order confirmation by email.
  5. We crate it, ship it and send tracking.

Call +1 (209) 733-0882 or email info@njglobalautoparts.com. First time buying an engine online? Read how it works.

About our prices

The used Cat C13 engine price on this page is what we charge today for a tested truck engine. Stock changes. A low mile engine may cost more and a higher mile one may cost less. We always tell you the miles, hours and condition of the exact engine we quote. Tell us your budget and we will show you what fits.

Frequently Asked Questions

What is your used Cat C13 engine price?

$9,800 for a tested engine, down from $11,500. Freight is added and confirmed before you pay.

Can I put an industrial C13 in my truck?

It can be done, but it needs extra parts and labor. A truck engine is usually the better deal.

Will a 2005 C13 work in my 2008 truck?

Not as a simple swap. Emissions hardware and software changed in 2007. Match the year group.

Does it come with the ECM and turbo?

It depends on the engine. We list exactly what is included.

How long will a used C13 last?

With good oil, clean air and normal care, many run hundreds of thousands of miles more.

Do you ship worldwide?

Yes, by road and sea, and by air when needed.

How do I pay?

By bank transfer. You get an invoice and order confirmation by email.

Final Word on the Used Cat C13 Engine Price

A C13 truck that is paid off and in good shape is worth keeping on the road. A tested used engine at a fair used Cat C13 engine price is the fastest and cheapest way to do it.

Get the serial and arrangement numbers, match truck to truck and year to year, check the fluids and blow by, ask what is included and get the delivered price in writing. That covers it.

When you are ready, see our Caterpillar C13 engines or send us your data plate photo, and we will send a straight used Cat C13 engine price with shipping to your door.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983