WhatsApp: +1 209 690 5983

,

Ford 289 V8 4.7L Engine for Sale

Price range: $2,800.00 through $5,500.00

Fairly used Ford 289 V8 4.7L for Mustang, Falcon, Fairlane, Galaxie, Comet and Cougar. Compression tested, photos and video before you pay, shipped worldwide. Long block from $2,800, complete engine up to $5,500.

This is a Ford 289 V8 4.7L engine for sale, fairly used, checked in our shop and ready to ship to you anywhere in the world. It’s the small block that made the first Mustang worth having, and it also went into Falcons, Fairlanes, Galaxies, Comets, Cougars and the early Shelby and Cobra cars. If your old 289 is smoking, knocking or just tired, this is a straight bolt in.

Prices start at $2,800 for a long block and go up to $5,500 for a complete engine with intake, carb, distributor and accessories. Where yours falls depends on the year, the casting and what comes with it. Tell us the car and we’ll quote the right Ford 289 V8 4.7L with shipping to your door.

Ford 289 V8 4.7L
Ford 289 V8 in a 1965 Mustang.

What You Get With the Ford 289 V8 4.7L

Every engine we sell is a real used engine pulled from a car, not a pile of parts. Before it’s listed we turn it over by hand, pull the plugs, run a compression test on all eight cylinders and look inside with a scope. You get photos of the test and a short video of the engine on the stand before you pay anything.

The long block is the block, crank, rods, pistons, cam, heads and valvetrain, with the timing cover and oil pan on. The complete engine adds the intake, carb, distributor, water pump, exhaust manifolds and whatever accessories came off with it. We list exactly what’s on your engine in the quote so there are no surprises when the crate is opened.

Ford 289 V8 4.7L Specifications

Here are the numbers most people ask for. Power figures are the original gross ratings Ford used in the 1960s.

EngineFord 289 V8 4.7L (Windsor small block)
Displacement289 cu in (4,728 cc)
Years built1963 to 1968
Layout90 degree V8, overhead valve, 2 valves per cylinder
Bore x stroke4.00 in x 2.87 in
Block and headsCast iron
Fuel system2 barrel or 4 barrel carburetor
Compression8.7:1 to 10.5:1 depending on version
Power195 hp (2V), 225 hp (4V), 271 hp (K-code Hi-Po), 306 hp (Shelby GT350)
Torque282 to 312 lb-ft
Firing order1-5-4-2-6-3-7-8
Bellhousing5 bolt (1963 to early 1965), 6 bolt after that
Dry weightAbout 460 lb

Cars That Used the 289

Ford put this small block in a lot of cars. If yours is on this list, the 289 we sell will drop in:

  • Ford Mustang 1964½ to 1968 (C-code 2V, A-code 4V and K-code Hi-Po)
  • Shelby GT350 1965 to 1967
  • Ford Falcon and Falcon Sprint 1964 to 1968, plus the Australian XR Falcon GT
  • Ford Fairlane 1963 to 1968
  • Ford Galaxie and Custom 1963 to 1968
  • Ford Ranchero 1964 to 1968
  • Mercury Comet and Cyclone 1964 to 1967
  • Mercury Cougar 1967 to 1968
  • Ford Torino and Fairlane early 1968 models
  • AC Cobra 289, Sunbeam Tiger Mk II and Griffith 200 and 400
  • Ford GT40 Mk I race cars ran a tuned 289

We also get a lot of requests for hot rods, kit cars and early Bronco swaps. The engine is light and compact, so it fits places a big block never will.

Why People Still Want the 289

Some of it is history. This was the engine in the car that started the pony car craze, and plenty of owners want the correct engine back under the hood. A numbers matching Mustang or Cougar is worth more with the right block in it, and a date coded 289 is the closest you’ll get.

The other reason is simple. It’s a good engine. It revs freely, it’s light, parts are cheap and every machine shop knows it. A healthy Ford 289 V8 4.7L with a 4 barrel feels lively in a 2,800 lb Mustang and it’ll happily run on the street every day.

How We Check Every Ford 289 V8 4.7L

We don’t sell an engine we haven’t looked at closely. This is what happens to each one:

  • Compression test on every cylinder, numbers shared with you
  • Borescope look at the cylinder walls and piston tops
  • Oil drained and checked for metal, water or fuel
  • Engine turned through by hand to feel for tight spots
  • Block and heads checked for cracks, especially around the freeze plugs
  • Casting numbers and date codes recorded so you know the year

If something isn’t right, we tell you before you buy, not after.

Common 289 Problems to Know About

These engines are now 55 to 60 years old, so it’s worth knowing where they wear. Valve guides and stem seals are the usual reason a 289 smokes at start up. Timing chains stretch, and the original nylon coated cam gear can shed teeth. Freeze plugs rust through, and the rear main seal on the rope type engines can weep.

None of this is hard or costly to fix. We point out anything we see during testing. On a complete engine we can fit a new timing set and gaskets before it ships if you ask.

One more thing. Early heads were made for leaded fuel. If you plan to drive a lot on unleaded, hardened exhaust seats are a smart upgrade during any head work.

Long Block or Complete Engine?

If your car runs and you’re keeping the intake, carb and accessories, the long block saves money. You move your parts over and you’re done.

If the car came to you with a missing or seized engine, or you’re building a swap from scratch, the complete Ford 289 V8 4.7L is the easier way. Most of what you need is already bolted on.

Ford 289 V8 4.7L Price Range

  • Long block: from $2,800
  • Complete engine with intake, carb and accessories: up to $5,500
  • Hi-Po K-code and date matched engines: priced on request, as they’re rare

Prices move with what’s in stock. The quote we send includes shipping to your country, so you see one clear number.

Worldwide Shipping and Payment

We ship the Ford 289 V8 4.7L to the USA, Canada, Mexico, Europe, Australia, New Zealand, the Caribbean, Latin America, the Middle East, Africa and Asia. Engines are drained, bagged, strapped to a pallet and crated. Sea freight is the cheaper way to send it. Air freight is quicker if you need the car back on the road.

Payment is by bank transfer. You get an invoice and an order confirmation by email, then tracking once it leaves. Our shipping policy has the details.

Fitting Tips

Check your bellhousing first. Early 1963 to 1964 cars used a 5 bolt bellhousing, and later cars used 6 bolts. Both blocks are out there, so tell us which one you need. Also match the flywheel or flexplate. Ford used 28 oz balance on the 289, which is different from the later 302 and 351 Windsor.

Swap the fuel pump if yours is old and keep your motor mounts if they’re still good. Prime the oil system before the first start and set the timing with a light. If you’re breaking in a fresh cam, follow the run in steps for a flat tappet.

2V, 4V or Hi-Po: Which 289 Do You Have?

The fifth digit of the VIN on a Mustang tells you the code. C means the 2 barrel, A is the 4 barrel premium fuel engine, and K is the Hi-Po with solid lifters and a stronger bottom end. The D code was a 4 barrel on some cars too. On the block, look for the casting number in the lifter valley or on the side.

Most buyers just want a good running Ford 289 V8 4.7L, and a C or A code is perfect for that. Restorers chasing a K-code should talk to us directly. Those come up rarely.

Rebuilding or Upgrading a Ford 289 V8 4.7L

A lot of buyers run the engine as it comes. Others use it as the base for a mild build, and the 289 takes that well. A set of aluminum heads, a dual plane intake and a 600 cfm carb wake it up without hurting how it drives in traffic. A hotter cam is fine too, just keep it sensible if the car has an automatic and stock gears.

If you want a stock rebuild, the parts are easy to find and cheap. Pistons, bearings, gaskets, a cam kit and a timing set for a Ford 289 V8 4.7L are sold almost everywhere. Most machine shops can bore it 0.030 or 0.040 over without any trouble, and a lot of our blocks are still on the standard bore.

Thinking about stroking it? Plenty of people turn a 289 into a 331 with a stroker crank. It works, but it costs more than starting with a 302 or 351 Windsor block. If big power is the goal, ask us about those instead. If keeping the car correct matters, stay with the Ford 289 V8 4.7L and spend the money on heads and a good ignition.

Who Buys This Engine From Us

Mostly classic owners getting their car back on the road, restoration shops working on numbers matching builds, and people putting a small block Ford in a hot rod or a truck. We also sell to dealers who keep a few in stock. Whoever you are, every Ford 289 V8 4.7L comes with the same test photos and the same honest answer about condition.

What most of them want is the same thing. A solid engine, a fair price and shipping that doesn’t turn into a mess. That’s what we try to give.

Need more power or a later Ford? Have a look at these:

You can also read our Ford 4.6L Modular V8 guide and our notes on how we test used engines, or browse all American car engines and Ford engines. The family history is in the Ford small block engine article, and the car that made it famous is covered in the first generation Mustang article.

Frequently Asked Questions

Will a Ford 289 V8 4.7L fit where my 260 or 302 was?

Yes. The 260, 289 and 302 share motor mounts and the 6 bolt bellhousing on later blocks. Check the flywheel balance and the bellhousing bolt count.

Is the 289 the same as a 302?

No. The 302 has a longer stroke, 3.00 in against 2.87 in. They look almost the same from the outside.

Can I get the Ford 289 V8 4.7L with a 4 barrel setup?

Yes. Tell us and we’ll quote it with a 4 barrel intake and carb, or as a long block.

Do you ship outside the USA?

Yes, by sea or air freight to most countries.

How do I pay?

By bank transfer, with an invoice and order confirmation by email. Call +1 (209) 733-0882 with questions.

Order Your Ford 289 V8 4.7L

Send us your car’s year and model, or the VIN, and where you are. We’ll match a Ford 289 V8 4.7L to it and come back with a price that includes shipping, usually the same day. More about who we are on our about page.

Engine Option

Long Block, Complete Engine

Reviews

There are no reviews yet.

Be the first to review “Ford 289 V8 4.7L Engine for Sale”

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983