We have the Chrysler 318 LA V8 5.2L engine for sale, fairly used and checked in our shop before it goes anywhere. The 318 LA is the small block that sat in millions of Darts, Dusters, Valiants, Furys, Ram pickups and vans from 1967 to 1991. It’s simple, it’s tough, and parts are everywhere, which is exactly why people still want one.
Our prices run from $1,800 for a long block up to $3,900 for a complete engine with carb or TBI, intake, distributor and accessories. Low mileage and date correct engines cost a little more. Send us your car or truck and we’ll quote the right Chrysler 318 LA V8 5.2L with shipping included.

Table of Contents
What You Get With the Chrysler 318 LA V8 5.2L
Every engine is a real used Mopar pulled from a running vehicle. We turn it over by hand, compression test all eight cylinders and look inside with a borescope. Before you pay, you get the numbers, a set of photos and a short video.
The long block includes the block, crank, rods, pistons, cam, heads and valvetrain, with the timing cover and oil pan on. The complete engine adds the intake, carburetor or throttle body, distributor, water pump, exhaust manifolds and whatever accessories came with it.
Chrysler 318 LA V8 5.2L Specifications
Output changed a lot over the years as emissions rules got tighter. These are the common figures.
| Engine | Chrysler 318 LA V8 5.2L |
| Displacement | 318 cu in (5,211 cc) |
| Years built | 1967 to 1991 (LA version) |
| Family | Chrysler LA small block |
| Layout | 90 degree V8, overhead valve, wedge heads, 2 valves per cylinder |
| Bore x stroke | 3.91 in x 3.31 in |
| Block and heads | Cast iron |
| Fuel system | Carter 2 barrel, Thermo-Quad or Carter 4 barrel on some, throttle body injection 1988 to 1991 |
| Compression | 9.2:1 early, about 8.5:1 to 9.0:1 later |
| Power | 230 hp gross early, roughly 140 to 175 hp net later |
| Torque | 340 lb-ft gross early, about 250 to 260 lb-ft net later |
| Firing order | 1-8-4-3-6-5-7-2 |
| Dry weight | About 525 lb |
Cars and Trucks That Used the 318 LA
The list is long. These are the ones we get asked about most:
- Plymouth Valiant, Duster, Scamp, Barracuda, Satellite, Road Runner, Fury, Gran Fury and Volare
- Dodge Dart, Demon, Swinger, Challenger, Charger, Coronet, Aspen, Diplomat, Monaco and Mirada
- Chrysler Newport, Cordoba, LeBaron, New Yorker and Fifth Avenue
- Dodge D100, D150, W150 pickups and Ramcharger
- Dodge Ram vans B150 and B250, plus the 1991 Dakota
- Plymouth Trail Duster and Voyager vans
- Chrysler Valiant and Valiant Charger in Australia
- Police cars, taxis, motorhomes and plenty of boats
If your vehicle had a 273, 318 or 360 LA, the Chrysler 318 LA V8 5.2L bolts right into the same spot.
LA 318 or Magnum 5.2?
This one catches people out. From 1992 Chrysler built the Magnum 5.2, which shares the bore and stroke but has different heads, multi port injection and valve covers with bolts down the middle. The intake bolt angles are different, so LA and Magnum intakes don’t swap.
There’s also the older A series 318 “poly” from the late 1950s and early 1960s. Different heads, different engine. We tell you clearly which one you’re getting, and the Chrysler 318 LA V8 5.2L in this listing is the true LA.
How We Check Every Chrysler 318 LA V8 5.2L
- Compression test on every cylinder, with the numbers sent to you
- Borescope look at the bores, piston tops and valves
- Oil drained and checked for metal, coolant or fuel
- Engine turned by hand to feel for tight spots
- Block and heads checked for cracks
- Casting numbers and date codes photographed
If something isn’t right, we tell you before you pay, not after.
Common 318 Problems to Know About
Honestly, the 318 doesn’t have many weak spots. What we see most is a stretched timing chain, worn valve stem seals that make it smoke on start up, and a leaking rear main seal. Exhaust manifolds can crack, and high mileage engines sometimes have a flat cam lobe.
None of that is expensive to fix. On a complete engine we can fit a new timing set and gaskets before it ships if you ask.
Long Block or Complete Engine?
If your old engine is going out with its intake, carb and accessories in good shape, the long block saves you money. You just swap your parts over.
If you’re rebuilding a project car or truck that’s been sitting, a complete Chrysler 318 LA V8 5.2L is the easier way. It’s ready to drop in and you’re not hunting for brackets.
Chrysler 318 LA V8 5.2L Price Range
- Long block: from $1,800
- Complete engine with intake, carb or TBI and accessories: up to $3,900
- Low mileage and date correct engines for restorations: priced on request
Prices change with stock. Your quote includes shipping, so there are no surprises later.
Worldwide Shipping and Payment
We ship the Chrysler 318 LA V8 5.2L to the USA, Canada, Mexico, Europe, the UK, Australia, New Zealand, the Middle East, Africa, Asia, Latin America and the Caribbean. Every engine is drained, bagged, strapped and crated on a pallet, and insured for its full value. Sea freight is cheaper, air freight is quicker.
We take payment by bank transfer. You get an invoice and an order confirmation by email, then tracking once it ships. Our shipping policy covers the details.
Fitting Tips
All LA small blocks share motor mounts and the small block bellhousing pattern, so a 318 goes behind your existing 904, 727 or A-833 without fuss. Note the balance though. The 318 is internally balanced, while the 360 is external, so don’t reuse a 360 flexplate or balancer.
On TBI trucks, keep your wiring harness and computer if they work. Prime the oil system before the first start, and set timing with the vacuum advance disconnected.
Rebuilding or Upgrading
The Chrysler 318 LA V8 5.2L is cheap to rebuild and takes upgrades well. Swapping to 340 or 360 heads, a 4 barrel intake and a mild cam is a well worn path to around 300 hp. Rebuild kits, gaskets and timing sets are in stock almost everywhere.
For a stock restoration or a work truck, leave it alone. It’ll run for a very long time with clean oil and a healthy cooling system.
Who Buys This Engine From Us
Owners of Dusters, Darts and Valiants, people keeping old Ram pickups and vans working, restoration shops, and repair shops replacing worn out engines for customers. A lot of our Chrysler 318 LA V8 5.2L engines also go to buyers overseas who still drive these cars daily.
Why the 318 Lasted So Long
Chrysler built the 318 LA for 25 years, and then kept the same bore and stroke going as the Magnum 5.2 until 2003. That tells you most of what you need to know. It was cheap to make, easy to fix and very hard to kill.
Fleets loved it. Police departments, taxi companies, utility companies and the US government all ran 318 cars and trucks for years. A lot of those engines saw 200,000 miles with nothing more than oil changes and a timing chain.
That’s also why so many are still around. When you buy a Chrysler 318 LA V8 5.2L from us, you’re getting an engine that a whole generation of mechanics already knows inside out. Any local shop can work on it, and parts cost very little.
Chrysler 318 LA V8 5.2L vs 360 LA
This is the other question we hear a lot. The 360 has a bigger bore and a longer stroke, so it makes more torque, which is nice in a heavy truck or van. It’s externally balanced, though, and it costs a bit more.
The 318 is smoother, a little lighter on fuel and plenty strong for a car or a half ton pickup. For a restoration, use what the car came with. For a daily driver or a work truck, the Chrysler 318 LA V8 5.2L is usually the best value we have.
One thing to keep in mind if you’re switching between them: flexplates and balancers are not shared. Use the 318 parts with a 318.
Buying Checklist Before You Order
- Know your vehicle’s year, model and VIN, plus whether it has a carb or throttle body injection
- Check if it’s a car engine or a truck engine, since brackets and oil pans can differ
- Decide between a long block and a complete engine based on what you’re keeping
- Make sure you know if your transmission is a 904, 727, 999 or manual
- Ask for the compression numbers and photos, which we send before payment anyway
With that in hand we can match a Chrysler 318 LA V8 5.2L to your car or truck the first time.
Break In and the First 500 Miles
Most of what goes wrong with a fresh engine swap happens in the first hour, so this part matters. Fill the engine with a break in oil that has plenty of zinc. Old style flat tappet cams need it, and most modern oils don’t have enough.
Prime the oil system with a priming tool before you crank it, until you see oil at every rocker. Set the timing close before the first start so it fires right away. Once it runs, hold it between 2,000 and 2,500 rpm for about 20 minutes, changing the speed a little. Don’t let it idle during that time. That’s how the cam and lifters wear in together.
After that, change the oil and filter, check for leaks and retorque anything that needs it. Drive it normally for the first 500 miles, vary the speed, and avoid full throttle runs. Then change the oil again and go enjoy the Chrysler 318 LA V8 5.2L.
Car Engine or Truck Engine?
The core of the engine is the same, but a 318 out of a Ram pickup or van is set up differently from one out of a Dart or a Fury. The oil pan sump sits in a different place, the exhaust manifolds are shaped for the chassis, and the brackets for the alternator, power steering and air conditioning don’t always match.
On the long block, none of that matters much, because you keep your own pan and accessories. On a complete engine, tell us the exact vehicle so we send a Chrysler 318 LA V8 5.2L with the right pan, manifolds and brackets. It saves you a weekend of swapping parts.
Injection is the other thing to check. 1988 to 1991 trucks and vans used throttle body injection with a computer. If you’re replacing one of those, you can reuse your throttle body and wiring on our engine. If you’d rather go back to a carburetor, we can supply the intake and carb for that too.
Keeping Your Chrysler 318 LA V8 5.2L Healthy
- Change the oil every 3,000 to 5,000 miles, using oil with zinc on flat tappet engines
- Flush the cooling system every couple of years. Old cast iron engines collect rust in the water jackets
- Replace the timing chain around 100,000 miles. It’s cheap insurance
- Keep the PCV valve and breather clean so the engine doesn’t build pressure and push out oil
- On TBI engines, keep the sensors and vacuum lines in good order
That’s really it. Look after it like that and a Chrysler 318 LA V8 5.2L will outlast most of the car around it. A lot of the ones we sell end up doing another 100,000 miles without trouble.
What Our Customers Use It For
Some put it back in a numbers matching restoration. Some use it to get an old work truck earning money again. Others drop a Chrysler 318 LA V8 5.2L into a Valiant or Dart that’s still a daily driver. All of them want the same thing: an engine that starts every morning and doesn’t cost a fortune.
Why Buy From NJ Global Auto Parts
We sell used engines every day, and old American V8s are a big part of what we do. We know what these engines look like when they’re healthy and what to watch for when they’re not. Every Chrysler 318 LA V8 5.2L we list has been looked at by someone who has rebuilt these engines, not just pulled out of a car and put on a shelf.
You talk to real people, by phone, email or WhatsApp. Ask us anything before you buy, whether it’s about casting numbers, mounts, carbs or shipping to your country. If we don’t know the answer, we’ll find out and tell you honestly.
We also stand behind what we sell. If the Chrysler 318 LA V8 5.2L doesn’t arrive the way we described it, we’ll make it right. Our warranty guide explains how that works, and you’ll get everything in writing with your invoice. Most of our customers come back for their next engine, and many send their friends with a Dart, Duster, Fury or Ram pickup to us too.
One more thing. We don’t rush you. Take your time, look at the photos and numbers, and ask your mechanic. We’d rather you buy the right engine once than the wrong one fast.
Other Names for This Engine
Buyers search for this engine in a lot of different ways, so here are the names you’ll see it under: 318, Dodge 318, Plymouth 318, Mopar 318, Chrysler 318 small block, LA 318, 318 TBI and Dodge 5.2L V8. They all point to the same engine on this page, the Chrysler 318 LA V8 5.2L.
Related Engines
Looking at other Mopar engines? Have a look at these:
- Chrysler 340 LA V8 5.6L
- Chrysler 440 Magnum V8 7.2L
- Chrysler 440 Six Pack V8 7.2L
- Chrysler Hemi 5.7L, 6.1L and 6.2L
- Ford 302 Windsor V8 5.0L
- Used transmissions
You may also like our Chrysler 318 V8 guide, the used Dodge engines page, our used engine warranty guide and the tested used engines guide. Or browse all Chrysler and Dodge engines. The full engine history is in the Chrysler LA engine article, and one of its best known homes is covered in the Plymouth Duster article.
Frequently Asked Questions
Will a Chrysler 318 LA V8 5.2L replace my 360?
Yes. Same mounts and bellhousing. Just use a 318 flexplate or flywheel and balancer, because the 360 is externally balanced.
Can I use my Magnum intake on it?
No. LA and Magnum heads have different intake bolt angles. Use an LA intake.
Is it carbureted or injected?
Both are available. Most car engines are carbureted, and 1988 to 1991 trucks and vans used throttle body injection. Tell us which you need.
Do you ship outside the USA?
Yes, by sea or air freight to most countries, fully insured.
How do I pay?
By bank transfer, with an invoice and order confirmation by email. Call +1 (209) 733-0882 with any questions.
Order Your Chrysler 318 LA V8 5.2L
Contact us with your vehicle’s year, model and VIN, and where you are. We’ll match a Chrysler 318 LA V8 5.2L to it and send a price with shipping, usually the same day. You can learn more about us on our about page.





Reviews
There are no reviews yet.