WhatsApp: +1 209 690 5983

,

Chevrolet 454 Big Block V8 7.4L Engine for Sale

Price range: $3,400.00 through $6,800.00

Fairly used Chevrolet 454 Big Block V8 7.4L for Chevelle, Monte Carlo, Corvette, El Camino, C10, Suburban and Express. Checked, filmed and shipped worldwide. Long block from $3,400, complete engine up to $6,800.

We have the Chevrolet 454 Big Block V8 7.4L for sale, fairly used and checked in our shop. This is the engine for when you want torque, lots of it. The 454 pulled the Chevelle SS 454 and the big block Corvettes in the early 1970s, then spent decades in pickups, Suburbans, vans and motorhomes towing heavy loads. We ship it to buyers all over the world.

Prices run from $3,400 for a long block to $6,800 for a complete engine. Truck engines from the 1980s and 1990s cost less. Early 1970s car engines with high compression and the right heads cost more. Tell us your vehicle and we’ll quote the right Chevrolet 454 Big Block V8 7.4L with freight.

Chevrolet 454 Big Block V8 7.4L
Chevrolet 454 big block V8 in a 1970 Monte Carlo SS.

What You Get With the Chevrolet 454 Big Block V8 7.4L

  • Long block, from $3,400: block, crank, rods, pistons, cam, heads, valvetrain, timing set, oil pan, timing cover and valve covers.
  • Complete engine, up to $6,800: the long block plus intake, Quadrajet carb or fuel injection, distributor and exhaust manifolds, and the water pump and brackets where we have them.

We send photos, a video of the engine turning over, the casting number and the stamp before you pay anything.

Chevrolet 454 Big Block V8 7.4L Specifications

Engine familyChevrolet big block (Mark IV, Gen V and Vortec 7400)
Displacement454 cu in (7.4 L, 7,440 cc)
Layout90 degree V8, overhead valves, canted valve heads
Bore x stroke4.25 x 4.00 in (108 x 101.6 mm)
Block and headsCast iron
Firing order1-8-4-3-6-5-7-2
PowerAbout 230 hp (later trucks, net) to 360 hp (1970 LS5, gross); Vortec 7400 about 290 hp
TorqueAbout 385 to 500 lb-ft depending on version
Fuel systemRochester Quadrajet 4 barrel, TBI from 1987, multiport injection on the Vortec 7400
Dressed weightRoughly 680 to 700 lb
Years built1970 to 2000 in GM cars and trucks

Three Generations of 454

Not every 454 is the same, and it matters when you order:

  • Mark IV (1970 to 1990): the classic big block in muscle cars and older trucks. Carbureted, then TBI on trucks from 1987.
  • Gen V (1991 to 1995): a one piece rear seal, a different block casting and no mechanical fuel pump boss. Used in trucks, the 454 SS pickup and vans.
  • Gen VI, the Vortec 7400 (1996 to 2000): better heads and multiport injection, found in heavy duty trucks, Suburbans and Express vans.

For a classic car, a Mark IV Chevrolet 454 Big Block V8 7.4L is the one to get, since it keeps the mechanical fuel pump and older bolt patterns. For a later truck, match the generation it came with.

Cars and Trucks That Used the 454

  • Chevrolet Chevelle SS 454 and Malibu, 1970 to 1975
  • Chevrolet Monte Carlo, 1970 to 1975 (SS 454 in 1970 and 1971)
  • Chevrolet Corvette, 1970 to 1974
  • Chevrolet El Camino SS 454, 1970 to 1975
  • Chevrolet Impala and Caprice, 1970 to 1976
  • Chevrolet C10, C20, C30 and K series pickups
  • Chevrolet 454 SS pickup, 1990 to 1993
  • Chevrolet Suburban and GMC Suburban, including the 2500 up to 2000
  • Chevrolet Express and GMC Savana vans, 1996 to 2000
  • GMC Sierra, Chevrolet Kodiak, and motorhomes and step vans on the P30 chassis

Why People Buy the 454

Some people want it for a muscle car. They want the big block sound and a shove in the back from 1,500 rpm. Others need it for work, towing a boat, a horse trailer or a camper with a truck that’s paid off. The 454 makes huge torque low in the rev range, it’s simple, and parts are easy to get. A healthy Chevrolet 454 Big Block V8 7.4L will do both jobs well.

How We Check Every Chevrolet 454 Big Block V8 7.4L

  • Compression test on all eight cylinders
  • Oil drained and checked for metal, fuel or water
  • Coolant checked for oil
  • Engine turned by hand to listen for knocks
  • Block and heads checked for cracks
  • Casting numbers and stamp confirmed
  • Photos and video before packing

Common 454 Problems

  • Overheating on hard working trucks. Big blocks make a lot of heat, so check the radiator and fan on your vehicle too.
  • Worn timing chains on high mileage engines.
  • Rear main seal leaks, mostly on Mark IV engines with the two piece seal.
  • Cam wear on flat tappet engines with low zinc oil.
  • Exhaust manifold bolts that snap or leak after years of heat.

We look for these before we list any engine.

Chevrolet 454 Big Block V8 7.4L Price Range

Long blockFrom $3,400
Complete engineUp to $6,800

Freight isn’t included, because it depends on where you are and how you want it shipped. A big block is heavy, so sea freight usually makes the most sense. You get the full price with shipping before you pay.

Worldwide Shipping and Payment

We ship the Chevrolet 454 Big Block V8 7.4L to most countries. It’s drained, capped, bolted to a pallet and wrapped, with tracking and customs papers. Payment is by bank transfer, with an invoice and order confirmation by email. See our shipping policy, billing terms and refund and returns policy.

Fitting Tips

  • Prime the oil system before first start.
  • Use oil with zinc if it has a flat tappet cam.
  • Fit a new water pump, thermostat and hoses, and make sure the radiator is up to big block duty.
  • Big blocks need big block motor mounts and headers. They won’t bolt into a small block frame without the right mounts.
  • Use the correct flexplate. Mark IV engines are externally balanced.

Chevrolet 454 Big Block V8 7.4L for Towing

Many of our 454 buyers aren’t building muscle cars at all. They have a 3/4 ton or 1 ton pickup, a Suburban or a motorhome that’s paid off and still has a good body, and the engine is worn out. For them a replacement Chevrolet 454 Big Block V8 7.4L is the cheapest way to keep a heavy duty vehicle working.

The 454 makes its torque low down, which is what you want with a trailer behind you. It’s thirsty, no getting around that, but it pulls hard and it’s easy to fix. In motorhomes the engine often sits in a tight spot, so check your access and plan the job before you start.

Carb, TBI or Vortec 7400?

  • Carbureted: 1970s and early 1980s cars and trucks with a Quadrajet. The easiest to put in anything.
  • TBI: 1987 to 1995 trucks and vans. Needs the matching computer and wiring.
  • Vortec 7400 (L29): 1996 to 2000, with multiport injection and better heads. Found in heavy duty Silverado and Sierra trucks, the Suburban 2500 and Express vans.

If you’re replacing the engine in an injected truck, keep it matched to what came out. If you’re putting a Chevrolet 454 Big Block V8 7.4L into an older vehicle or a swap, a carbureted engine is far simpler.

Putting a 454 in a Small Block Car

Plenty of people want to swap a 350 for a 454 to get more torque. It works, but it’s more than just an engine change:

  • Big block engine mounts or frame stands
  • Big block headers or exhaust manifolds
  • A larger radiator and a good fan
  • Stronger front springs, since the big block is heavier
  • The 454 flexplate or flywheel and balancer
  • A gearbox that can take the torque, like a TH400

Cars that came with big blocks from the factory, like the Chevelle, Camaro, Nova and C10, are the easiest because the parts are well known.

Gearboxes for a 454

The 454 uses the standard Chevy bellhousing pattern. The usual partners are the Turbo 400 automatic, the 4L80E automatic in later trucks, and Muncie M21 and M22 four speeds or modern manuals in cars. A TH350 will cope behind a mild engine in a light car, but for towing or hard use go to a TH400 or 4L80E. See our used transmissions if you need one, or ask about an engine and transmission combo.

Fuel and Running Costs

Let’s be straight about it. A Chevrolet 454 Big Block V8 7.4L is not cheap to run. A truck with one uses a lot of fuel, and more when towing. Most owners accept that because the engine is cheap to buy, simple to keep going and does the work. If fuel cost worries you and you don’t tow, a 350 may suit you better.

Keeping a Big Block Healthy

Big blocks last if you look after the basics. Change the oil and filter on time, add zinc if it has a flat tappet cam, keep the cooling system clean and replace the thermostat when it’s tired. Let it warm up before you put a load on it, and watch the temperature gauge when towing in hot weather. Do that and a good 454 keeps going for a long time.

Read the used Chevy engines guide, or browse American car engines, Chevy engines and all used engines. The full history of the family is in the Chevrolet big-block engine article, and the Chevrolet Chevelle article covers the car that made the 454 famous.

Frequently Asked Questions

Will a Chevrolet 454 Big Block V8 7.4L fit where a 396 or 402 was?

Yes. They share mounts, bellhousing pattern and most parts. The 454 needs its own flexplate or balancer because it is externally balanced.

Can I put a 454 in a car that had a small block?

Yes, with big block mounts, headers, a bigger radiator and often stiffer front springs.

Do you have truck and car versions?

Yes. Tell us what it’s going into.

Do you ship worldwide?

Yes, by sea or air freight.

How do I pay?

By bank transfer. Call +1 (209) 733-0882 with any questions.

Order Your Chevrolet 454 Big Block V8 7.4L

Send us your vehicle, year and country. We’ll pick a Chevrolet 454 Big Block V8 7.4L that fits and send you a price with freight. Learn more about us.

Engine Option

Long Block, Complete Engine

Reviews

There are no reviews yet.

Be the first to review “Chevrolet 454 Big Block V8 7.4L Engine for Sale”

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983