WhatsApp: +1 209 690 5983

,

Ford 429 Cobra Jet V8 7.0L Engine for Sale

Price range: $7,500.00 through $15,500.00

Ford 429 Cobra Jet V8 7.0L for Mustang Mach 1, Torino Cobra, Ranchero GT, Cyclone Spoiler and 1971 Cougar. Compression tested, castings photographed, shipped worldwide. Long block from $7,500, complete engine up to $15,500.
Also known as: 429 Cobra Jet, 429 CJ, 429 SCJ (Super Cobra Jet), Ford 429 big block, Ford 385 series 429 and Ford 7.0 V8.

This is a Ford 429 Cobra Jet V8 7.0L engine for sale. It’s fairly used, it’s been checked in our shop, and we ship it anywhere in the world. Ford put the 429 CJ in the Mustang Mach 1, Torino Cobra, Ranchero GT and Mercury Cyclone for 1970 and 1971, and it was the last big muscle engine Ford built before emissions rules killed the party.

Prices start at $7,500 for a long block and go up to $15,500 for a complete engine with the Quadrajet, intake, distributor and accessories. Original date coded engines and Super Cobra Jets are priced on request. Tell us your car and we’ll quote the right Ford 429 Cobra Jet V8 7.0L with shipping included.

Ford 429 Cobra Jet V8 7.0L
429 Cobra Jet with the Ram Air shaker scoop, as fitted to the 1970 Mustang Mach 1.

What Comes With the Ford 429 Cobra Jet V8 7.0L

Every engine we sell came out of a car. We turn it over by hand, run a compression test on all eight cylinders and look inside with a borescope. You get the numbers, photos and a short video before you pay.

The long block is the block, crank, rods, pistons, cam, heads and valvetrain, with the timing cover and oil pan fitted. The complete engine adds the intake, carb, distributor, water pump, exhaust manifolds and any accessories that came with it. We tell you in writing if it’s an original CJ or a 429 built to CJ spec, so there’s no guessing.

Ford 429 Cobra Jet V8 7.0L Specifications

The 429 belongs to Ford’s 385 series, a newer big block design than the FE. The heads have canted valves and huge ports, which is where the CJ gets its breathing.

EngineFord 429 Cobra Jet V8 7.0L (429 CJ)
Displacement429 cu in (7,030 cc)
Years built1970 to 1971
FamilyFord 385 series big block
Layout90 degree V8, overhead valve, 2 valves per cylinder
Bore x stroke4.36 in x 3.59 in
HeadsCast iron, canted valve, large port CJ castings
Fuel systemRochester Quadrajet 4 barrel, 715 cfm (Holley 780 on Super Cobra Jet)
Compression11.3:1
Power370 hp gross at 5,400 rpm (375 hp on Super Cobra Jet)
Torque450 lb-ft at 3,400 rpm
Bottom end4 bolt main caps, nodular iron crank
Firing order1-5-4-2-6-3-7-8
Dry weightAbout 720 lb

Cars That Used the 429 Cobra Jet

It was only offered for two model years, so the list is short. If your car is on it, this engine is the correct fit:

  • Ford Mustang Mach 1, SportsRoof and convertible 1970 to 1971
  • Ford Torino Cobra and Torino GT 1970 to 1971
  • Ford Fairlane 500 1970
  • Ford Ranchero GT 1970 to 1971
  • Mercury Cyclone, Cyclone GT and Cyclone Spoiler 1970 to 1971
  • Mercury Montego MX 1970 to 1971
  • Mercury Cougar and Cougar XR-7 1971

We also sell a lot of these to people building Galaxie and F-100 restomods, plus Cobra replicas. The block takes the same bellhousing bolt pattern as the Ford small blocks, which makes those swaps easier than most people expect.

429 CJ, Super Cobra Jet or Boss 429?

People mix these up all the time. The regular Cobra Jet had a hydraulic cam and the Quadrajet. The Super Cobra Jet came with the Drag Pack option and got a solid lifter cam, a Holley 780, forged pistons and an oil cooler.

The Boss 429 is a different animal. It has semi hemi heads, a special block and only went into Mustangs built for NASCAR homologation. We don’t sell Boss engines as a Ford 429 Cobra Jet V8 7.0L, and we’ll tell you straight if a block someone calls a Boss is really a CJ.

How We Check Every Ford 429 Cobra Jet V8 7.0L

  • Compression test on every cylinder, with the numbers sent to you
  • Borescope look at the bores, piston tops and valves
  • Oil drained and checked for metal, coolant or fuel
  • Engine turned over by hand to feel for tight spots
  • Block and heads checked for cracks and old weld repairs
  • Casting numbers, date codes and CJ markings photographed

If something looks off, you hear it from us first. We’d rather lose a sale than ship a problem.

Common 429 Problems Worth Knowing

These engines are tough, but most of them have lived hard. The big ones we look for are worn timing chains, tired valve guides, leaking rear main seals and overheating marks. Cars that spent time at the drag strip can have spun bearings or a cracked piston.

The CJ also runs high compression. On today’s pump gas it can ping unless the timing is set right or the compression is dropped a bit. If you’re building a driver, ask us about that before you order.

Fakes exist too. A plain 429 Thunder Jet out of a Thunderbird or LTD can be dressed up to look like a CJ. We check the head castings and the four bolt mains and tell you what we see.

Long Block or Complete Engine?

If your car still has its original intake, Quadrajet and Ram Air parts, buy the long block. You keep your correct pieces and bolt them on.

If you’re missing parts, a complete Ford 429 Cobra Jet V8 7.0L is usually cheaper than chasing the intake, carb and distributor one at a time. Correct CJ parts are not cheap on their own.

Ford 429 Cobra Jet V8 7.0L Price Range

  • CJ spec long block: from $7,500
  • Complete engine with intake, Quadrajet and accessories: up to $15,500
  • Original date coded Cobra Jet and Super Cobra Jet engines: priced on request

Prices move with what we have in stock. Your quote includes shipping, so you get one clear number.

Worldwide Shipping and Payment

We ship the Ford 429 Cobra Jet V8 7.0L to the USA, Canada, Mexico, Europe, the UK, Australia, New Zealand, the Middle East, Africa, Asia, Latin America and the Caribbean. Each engine is drained, bagged, strapped down and crated on a pallet, then insured for the full value. Sea freight costs less. Air freight is faster.

Payment is by bank transfer. You get an invoice and an order confirmation by email, then tracking once it leaves. Our shipping policy has all the details.

Fitting Tips

The 429 uses 385 series motor mounts, so a car that had a 351 or a 302 needs the big block mounts and frame brackets. The bellhousing pattern carries over, which helps. The 429 is internally balanced, so use the correct neutral balance flywheel or flexplate and balancer.

Cooling matters a lot on a 429. Run a good radiator and a proper fan shroud. Prime the oil system before the first start and set the timing carefully if you’re on modern fuel.

Rebuilding or Upgrading

For a numbers matching car, keep it stock and keep the original heads and carb with the car. Rebuild parts for the 385 series are easy to get, and most engine shops know them well.

For a driver or a restomod, a Ford 429 Cobra Jet V8 7.0L responds really well to aluminum heads, a roller cam and an EFI conversion. Stroking one to 514 or more with a 460 style crank is common, and 550 hp on pump gas is very doable.

Who Buys This Engine From Us

Mostly collectors restoring Mach 1, Torino Cobra and Cyclone Spoiler cars, restoration shops, and people building big block street cars. Dealers buy from us too. Every Ford 429 Cobra Jet V8 7.0L we sell comes with photos, castings and a plain description of what it is.

A Short History of the 429 Cobra Jet

Ford brought out the 385 series in 1968, first as a 429 for the Thunderbird and big Lincolns. It was meant to replace the old FE in the large cars, but it didn’t take long for someone at Ford to see what it could do in a lighter body.

By 1970 the 428 Cobra Jet was on its way out, and the 429 took its place in the Torino and the Mustang. Ford gave it bigger port heads, four bolt mains and a hotter tune, and the Ford 429 Cobra Jet V8 7.0L was born. A Torino Cobra with the Drag Pack was one of the quickest cars you could buy that year.

It didn’t last. Insurance costs for muscle cars went through the roof, and new emissions rules meant lower compression from 1972. The CJ was gone after 1971, which is a big part of why these engines are worth what they are today.

Ford 429 Cobra Jet V8 7.0L vs 428 Cobra Jet

We sell both, so we get this question every week. The 428 is an FE engine with a long stroke. It makes big torque down low and feels like it’s pulling a house. The 429 has a bigger bore, a shorter stroke and canted valve heads, so it breathes better higher up and likes to rev.

Parts are the other big difference. The 385 series shares a lot with the 460, which Ford built into the late 1990s, so pistons, gaskets, cams and heads are cheap and easy to find. FE parts are out there too, but they usually cost more.

If your car came with one of them, buy the one it came with. If you’re building something new, a Ford 429 Cobra Jet V8 7.0L gives you more room to grow for less money.

Buying Checklist Before You Order

  • Know your car’s VIN and engine code. On 1970 and 1971 Fords, C means 429 CJ and J means the Ram Air CJ
  • Decide if you need a date correct engine or a good running 429 built to CJ spec
  • Check what you already have, such as intake, carb, distributor and exhaust manifolds
  • Think about fuel. A stock CJ needs good premium, or a small change to compression
  • Ask for the compression numbers and photos before you pay, which we send anyway

Send us that information and we’ll pick the right Ford 429 Cobra Jet V8 7.0L for your car the first time, with no back and forth.

Break In and the First 500 Miles

Most of what goes wrong with a fresh engine swap happens in the first hour, so this part matters. Fill the engine with a break in oil that has plenty of zinc. Old style flat tappet cams need it, and most modern oils don’t have enough.

Prime the oil system with a priming tool before you crank it, until you see oil at every rocker. Set the timing close before the first start so it fires right away. Once it runs, hold it between 2,000 and 2,500 rpm for about 20 minutes, changing the speed a little. Don’t let it idle during that time. That’s how the cam and lifters wear in together.

After that, change the oil and filter, check for leaks and retorque anything that needs it. Drive it normally for the first 500 miles, vary the speed, and avoid full throttle runs. Then change the oil again and go enjoy the Ford 429 Cobra Jet V8 7.0L.

What a 429 CJ Is Like on the Street

People who’ve only driven modern V8s are always surprised by this engine. It idles with a lumpy, heavy beat, and the whole car rocks a little with it. Step on it from a roll and the Quadrajet’s big secondaries open, and the car just goes. There’s no waiting for boost and no gear hunting.

It’s not a quiet commuter, and it likes fuel. But for a weekend car or a show car you actually drive, a healthy Ford 429 Cobra Jet V8 7.0L is about as much fun as an old Ford gets.

Keeping Your Ford 429 Cobra Jet V8 7.0L Healthy

  • Use oil with zinc for the life of a flat tappet cam, and change it every 3,000 miles or once a year
  • Keep the cooling system clean and the fan shroud in place. These engines run hot in traffic
  • Check the timing every season, especially if you change fuel brands
  • Look at the Quadrajet secondaries now and then. They should open smoothly, not stick
  • If the car sits for months, start it every few weeks or fog the cylinders before storage

Do those few things and a Ford 429 Cobra Jet V8 7.0L will keep running strong for a very long time. If you ever have a question after you install it, call us. We’ve been there.

Why Buy From NJ Global Auto Parts

We sell used engines every day, and old American V8s are a big part of what we do. We know what these engines look like when they’re healthy and what to watch for when they’re not. Every Ford 429 Cobra Jet V8 7.0L we list has been looked at by someone who has rebuilt these engines, not just pulled out of a car and put on a shelf.

You talk to real people, by phone, email or WhatsApp. Ask us anything before you buy, whether it’s about casting numbers, mounts, carbs or shipping to your country. If we don’t know the answer, we’ll find out and tell you honestly.

We also stand behind what we sell. If the Ford 429 Cobra Jet V8 7.0L doesn’t arrive the way we described it, we’ll make it right. Our warranty guide explains how that works, and you’ll get everything in writing with your invoice. Most of our customers come back for their next engine, and many send their friends with a Mustang, Torino or Cyclone to us too.

One more thing. We don’t rush you. Take your time, look at the photos and numbers, and ask your mechanic. We’d rather you buy the right engine once than the wrong one fast.

Other Names for This Engine

Buyers search for this engine in a lot of different ways, so here are the names you’ll see it under: 429 Cobra Jet, 429 CJ, 429 SCJ (Super Cobra Jet), Ford 429 big block, Ford 385 series 429 and Ford 7.0 V8. They all point to the same engine on this page, the Ford 429 Cobra Jet V8 7.0L.

Shopping other Ford V8s or comparing with Mopar big blocks? Have a look at these:

You can also read our used engine warranty guide and tested used engines guide, or browse all Ford engines and used engines. For background on the engine family, see the Ford 385 engine article, and the car most of these came out of is covered in the Ford Torino article.

Frequently Asked Questions

Is the 429 Cobra Jet 7.0L or 7.1L?

It works out to 7,030 cc. Ford and most people round it to 7.0L, which is how we list the Ford 429 Cobra Jet V8 7.0L.

Will it fit where my 351 was?

Yes with big block mounts, a 429 radiator and the right exhaust. The bellhousing bolts up.

Is it an original CJ?

Each quote says so clearly. We sell original engines and 429s built to CJ spec, and we photograph the castings either way.

Do you ship outside the USA?

Yes, by sea or air freight to most countries, fully insured.

How do I pay?

By bank transfer, with an invoice and order confirmation by email. Call +1 (209) 733-0882 with any questions.

Order Your Ford 429 Cobra Jet V8 7.0L

Send us your car’s year, model and VIN, plus your country. We’ll match a Ford 429 Cobra Jet V8 7.0L to it and send a price with shipping, usually the same day. You can read more about us on our about page.

Engine Option

Long Block, Complete Engine

Reviews

There are no reviews yet.

Be the first to review “Ford 429 Cobra Jet V8 7.0L Engine for Sale”

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983