This is a Ford 428 Cobra Jet V8 7.0L engine for sale, fairly used, tested in our shop and ready to ship anywhere in the world. The Cobra Jet turned the Mustang into a real drag strip car in 1968, and it went on to power the Shelby GT500 KR, Torino Cobra, Fairlane Cobra, Cougar Eliminator and Mercury Cyclone. If you’re restoring one of those cars or want proper FE big block power, this is the engine.
Prices run from $9,500 for a CJ spec long block up to $18,500 for a complete, date correct Cobra Jet with intake, Holley carb, distributor and accessories. Genuine original engines cost more than CJ spec builds, and the year and parts on it matter a lot. Tell us your car and we’ll quote the right Ford 428 Cobra Jet V8 7.0L with shipping included.

Table of Contents
What You Get With the Ford 428 Cobra Jet V8 7.0L
Every engine is a real used FE pulled from a car, checked by us and documented. We turn it over by hand, compression test all eight cylinders and look inside with a borescope. You get the numbers, photos and a short video before you pay, plus photos of the casting numbers and date codes.
The long block is the block, crank, rods, pistons, cam, heads and valvetrain, with the timing cover and oil pan on. The complete engine adds the intake, carb, distributor, water pump, exhaust manifolds and whatever accessories came with it. We tell you in writing whether the engine is an original Cobra Jet or a 428 built to CJ spec, so you know exactly what you’re paying for.
Ford 428 Cobra Jet V8 7.0L Specifications
Ford rated the Cobra Jet low on purpose. Real output was much higher than the 335 hp on paper.
| Engine | Ford 428 Cobra Jet V8 7.0L (428 CJ) |
| Displacement | 428 cu in (7,013 cc) |
| Years built | 1968 to 1970 |
| Family | Ford FE big block |
| Layout | 90 degree V8, overhead valve, 2 valves per cylinder |
| Bore x stroke | 4.13 in x 3.98 in |
| Heads | Cast iron, 427 low riser style ports |
| Fuel system | Holley 4 barrel, 735 cfm, Ram Air on many cars |
| Compression | 10.6:1 |
| Power | 335 hp gross at 5,200 rpm (real figure believed near 400 hp) |
| Torque | 440 lb-ft at 3,400 rpm |
| Crank | Nodular iron |
| Firing order | 1-5-4-2-6-3-7-8 |
| Dry weight | About 680 lb |
Cars That Used the 428 Cobra Jet
Production was short, so the list is tight. If your car is here, our engine is the correct fit:
- Ford Mustang GT and Mach 1 1968½ to 1970
- Shelby GT500 KR 1968 and GT500 1969 to 1970
- Ford Torino Cobra and Torino GT 1969 to 1970
- Ford Fairlane Cobra 1969
- Ford Ranchero GT 1969 to 1970
- Mercury Cougar XR-7 and Eliminator 1969 to 1970
- Mercury Cyclone CJ and Cyclone Spoiler 1969 to 1970
- Mercury Montego MX and Comet 1969 to 1970 (rare option)
We also supply 428s for big block Cobra replicas and Galaxie restomods. The 428 Police Interceptor is a different engine, but it shares the same block size, and we can tell you the difference.
Why People Still Want the 428 CJ
It’s the engine behind some of the most valuable muscle cars Ford ever built. A Mach 1 or a GT500 with the correct block is worth far more than one with a substitute, so restorers pay well for the real thing.
Beyond the value, it’s a brute. The long stroke and big bore give huge torque low down, and a well set up Ford 428 Cobra Jet V8 7.0L pulls like a freight train from 2,000 rpm on. That feeling is why people still chase it.
How We Check Every Ford 428 Cobra Jet V8 7.0L
Because the money involved is high, we’re thorough:
- Compression test on every cylinder, numbers shared with you
- Borescope check of the bores, piston tops and valves
- Oil drained and checked for metal, coolant or fuel
- Engine turned through by hand to feel for tight spots
- Block and heads checked for cracks and old repairs
- Casting numbers, date codes and any CJ markings photographed and recorded
If anything doesn’t add up, you hear it from us first.
Common 428 Problems to Know About
Like every FE, the 428 sends oil up to the rocker shafts through the heads. Sludge can block the passages and starve the top end, so keep it clean and run an oil with zinc. Timing chains stretch, the rope rear main seal can leak and intake gaskets can weep.
Many of these cars were raced hard. We look closely for overheating marks, spun bearings and cracked cylinder walls. On a complete engine we can fit a fresh timing set and gaskets before shipping if you ask.
Also be careful with fakes. A regular 428 can be dressed up to look like a CJ. We check the castings and tell you what we see.
Long Block or Complete Engine?
If you already have the correct intake, Holley and Ram Air parts, a long block is the sensible buy. You keep your original pieces and drop it in.
If the car is missing those parts, a complete Ford 428 Cobra Jet V8 7.0L saves you hunting for each item, which can take months on its own.
Ford 428 Cobra Jet V8 7.0L Price Range
- CJ spec long block: from $9,500
- Complete engine with CJ intake, Holley carb and accessories: up to $18,500
- Original date coded Cobra Jet and Super Cobra Jet engines: priced on request
These prices change with what’s available. Your quote includes shipping, so you get one clear total.
Worldwide Shipping and Payment
We ship the Ford 428 Cobra Jet V8 7.0L to the USA, Canada, Mexico, Europe, Australia, New Zealand, the Caribbean, Latin America, the Middle East, Africa and Asia. Engines are drained, bagged, strapped and crated on a pallet, and insured for the full value. Sea freight is cheaper. Air freight is quicker.
Payment is by bank transfer. You get an invoice and an order confirmation by email, then tracking when it ships. Our shipping policy has the details.
Fitting Tips
The 428 uses FE mounts and the FE bellhousing pattern. If your car had a 390 or 428, it lines up. The 428 is externally balanced, so you need the matching flywheel or flexplate and balancer. Using 390 parts will cause vibration.
Cobra Jet cars came with bigger radiators, so keep the cooling system healthy. If your car has Ram Air, check the seal under the hood scoop. Prime the oil system before the first start and make sure oil reaches the rocker shafts.
Cobra Jet or Super Cobra Jet: Which Do You Have?
The Super Cobra Jet came with the Drag Pack option and a 3.91 or 4.30 rear axle. It got stronger LeMans style rods, a different crank balance and an engine oil cooler on many cars. The standard Cobra Jet used regular rods and no oil cooler.
On a Mustang, the fifth digit of the VIN is R for the Ram Air CJ and Q for the non Ram Air version. Send us the VIN and photos of your car, and we’ll match the right Ford 428 Cobra Jet V8 7.0L before you pay.
Rebuilding or Upgrading a Ford 428 Cobra Jet V8 7.0L
Most owners of numbers matching cars keep the engine stock. For those, rebuild parts are easy to find and many machine shops know the FE well. Keep the original heads, intake and carb with the car if you can, since they add value.
If the car is a driver or a restomod, a Ford 428 Cobra Jet V8 7.0L takes aluminum heads, a roller cam and modern ignition very well. Power over 500 hp is realistic, and it still drives fine on the street.
Some builders stroke a 428 to 482 or more. That’s best done with a non numbers block, which we can also supply.
Who Buys This Engine From Us
Collectors restoring Mach 1, Shelby, Torino Cobra and Cougar Eliminator cars, restoration shops, and people building fast FE powered street cars and replicas. Dealers buy from us too. Every Ford 428 Cobra Jet V8 7.0L we sell comes with full photos, castings and an honest description of what it is.
They want a real engine, a fair price and safe shipping for something valuable. That’s what we work hard to give.
Related Engines
Looking at other Ford V8s? Have a look at these:
- Ford FE 390 V8 6.4L
- Ford 351 Windsor V8 5.8L
- Ford 302 Windsor V8 5.0L
- Ford 289 V8 4.7L
- Chevrolet LS6 454 V8
- Ford 5.0 Coyote engine
- Used transmissions
You can also read our used engine warranty guide and tested used engines guide, or browse all American car engines and Ford engines. The full FE history is in the Ford FE engine article, and the Shelby side of the story is in the Shelby Mustang article.
Frequently Asked Questions
Will a Ford 428 Cobra Jet V8 7.0L fit where my 390 was?
Yes. Same mounts and bellhousing. You need the 428 flywheel or flexplate and balancer because of the external balance.
Is it an original Cobra Jet?
Each listing says so clearly. We sell both original engines and 428s built to CJ spec, and we photograph the castings.
What is the real horsepower?
Ford said 335 hp. Most people believe the real number was close to 400 hp.
Do you ship outside the USA?
Yes, by sea or air freight to most countries, fully insured.
How do I pay?
By bank transfer, with an invoice and order confirmation by email. Call +1 (209) 733-0882 with questions.
Order Your Ford 428 Cobra Jet V8 7.0L
Send us your car’s year, model and VIN, and where you are. We’ll match a Ford 428 Cobra Jet V8 7.0L to it and send a price with shipping, usually the same day. Learn more about us on our about page.





Reviews
There are no reviews yet.