WhatsApp: +1 209 690 5983

Mercedes OM642 replacement engine cost

Mercedes OM642 Replacement Engine Cost: 7 Proven Ways to Pay Less

The OM642 is one of those engines owners love right up until the day it costs them serious money. Big torque, smooth at speed, tows well, and it sits in everything from the E-Class to the Sprinter and the Jeep Grand Cherokee. When one finally gives up, the question I hear on the phone is always the same: what is the real Mercedes OM642 replacement engine cost, and should I do it or walk away from the vehicle?

We sell tested, fairly used OM642 V6 diesel engines and ship them worldwide. I deal with owners and workshops on these every week, so this page is based on what jobs actually cost, not on guesses. You will see the specs, the vehicles, price ranges for used, rebuilt and new engines, labor, the extras that sneak in, and how to buy without getting burned.

Need a quote? Send your VIN and engine number through our contact page or call +1 (209) 733-0882. You can also look through our Mercedes engines in the shop or read our page on the used OM642 diesel engine for sale.

Mercedes OM642 replacement engine cost

If you only want the number, the next section gives it to you. If you want to understand why quotes vary so much, read on.

Mercedes OM642 Replacement Engine Cost at a Glance

For most owners, the total Mercedes OM642 replacement engine cost with a good used engine and an independent shop lands between about $4,500 and $8,500. A new factory engine fitted at a main dealer can easily pass $15,000.

ItemTypical range (USD)
Used, tested OM642 engine$2,500 to $4,500
Rebuilt or remanufactured OM642$5,500 to $8,500
New factory engine (parts only)$11,000 to $15,000 and up
Labor to remove and fit$1,400 to $3,200
Seals, oil cooler gaskets, fluids, filters$300 to $800
Freight, depending on country$300 to $1,300

Those numbers come from jobs across North America, Europe, the Gulf, Africa and Asia. Parts prices are fairly similar everywhere. Labor is what moves the Mercedes OM642 replacement engine cost the most from one country to the next.

The exact engine price depends on the version you need, the mileage and what comes bolted to it. Send the VIN and we will give you a written figure rather than a range.

What Is the OM642 Engine?

The Mercedes-Benz OM642 is a 3.0 litre V6 common rail diesel that arrived in 2005. It replaced the inline five and six cylinder diesels and quickly became the main Mercedes diesel for bigger cars, SUVs and vans. It was also sold to Chrysler and Jeep, which is why you find it under the bonnet of a Grand Cherokee 3.0 CRD.

It is a strong engine at its core. The bottom end is tough and plenty pass 400,000 km. What usually brings them down is a slow leak or a sensor issue that someone kept driving on. By the time the Mercedes OM642 replacement engine cost becomes the topic, the engine has normally been sick for a while.

OM642 Specifications

Engine codeOM642 (DE 30 LA)
Layout72 degree V6, DOHC per bank, 24 valves
Displacement2,987 cc
Bore x stroke83.0 mm x 92.0 mm
Compression ratioAbout 17.7:1 on early engines, 15.5:1 on later BlueTEC units
Fuel systemBosch common rail with piezo injectors
AspirationSingle variable geometry turbo with intercooler
PowerAbout 184 to 265 hp (135 to 195 kW), depending on version
Torque400 to 620 Nm (295 to 457 lb-ft)
Cam driveTiming chains
BlockAluminium with cast iron cylinder liners
Production2005 to the late 2010s
EmissionsEuro 4, Euro 5, Euro 6 and BlueTEC versions

The aluminium block keeps the weight down, but it also means overheating is bad news. A V6 that has been run hot after losing coolant is one of the most common reasons we end up supplying a whole engine instead of a head gasket set.

Vehicles That Use the OM642

  • E-Class W211 and W212: E280, E300, E320 and E350 CDI and BlueTEC
  • C-Class W204: C320 and C350 CDI
  • CLS 320 and 350 CDI
  • S-Class W221: S320 and S350 CDI and BlueTEC
  • ML-Class W164 and W166: ML280, ML300, ML320 and ML350 CDI and BlueTEC
  • GL-Class X164 and X166: GL320 and GL350
  • R-Class: R280, R320 and R350 CDI
  • G-Class: G350 CDI and G350 BlueTEC
  • Sprinter V6: 318, 319, 518, 519 CDI and the 3500 V6
  • Jeep Grand Cherokee 3.0 CRD, Jeep Commander 3.0 CRD and Chrysler 300C 3.0 CRD

Not every OM642 is a direct swap for every vehicle. Sumps, oil pickups, mounts, turbo positions and wiring change between cars, vans and the Jeep versions. Emissions generation matters too. This is why we match by VIN, and it is one of the cheapest ways to protect your Mercedes OM642 replacement engine cost.

Why OM642 Engines Need Replacing

Oil cooler seal leaks

This is the famous one. The oil cooler sits in the valley between the cylinder banks, and its seals harden with age. Oil pools in the valley and runs down the back of the engine. On its own it is a repair, not a replacement, but the job is labor heavy and some owners keep topping up oil instead. Run it low long enough and the bearings go.

Injector seal failure

When an injector seal leaks, combustion gas blows past and leaves a crust of black carbon around the injector. Left alone, the injector can seize in the head. Pulling a seized injector sometimes damages the head, and then the bill climbs fast.

Swirl flaps and intake manifold

The intake has swirl flaps driven by an actuator. Linkages wear and the actuator fails. Normally an annoyance, but broken parts can end up in the cylinder on rare occasions.

Timing chain and tensioner

High mileage and poor oil changes stretch the chains. A rattle on cold start is the early warning.

Overheating

A failed water pump, cracked hose or blocked radiator on an aluminium V6 can warp the heads and crack the block. That is often a full engine job.

Turbo failure and oil starvation

A turbo that fails can push oil into the intake or starve the engine. Either way, you may need an engine and a turbo.

Each failure changes the Mercedes OM642 replacement engine cost differently. A turbo failure means a new turbo and an intercooler clean on top. An overheat means a new radiator and water pump at the same time.

Used, Rebuilt or New: How the Mercedes OM642 Replacement Engine Cost Changes

Used (fairly used) engine

This is what we sell and what most owners choose. A tested used OM642 from a running donor gives you the lowest Mercedes OM642 replacement engine cost while still putting a sound engine in the vehicle. The key is proof: compression figures, photos, a look inside and a written warranty.

Rebuilt engine

A proper rebuild includes new bearings, rings, chains, tensioners, oil cooler seals and gaskets. It costs more and takes longer, but it suits a vehicle you plan to keep for a long time, like a well kept G350 or a high mileage fleet Sprinter. Always ask for the parts list.

New factory engine

On a newer vehicle under a fleet deal, it may make sense. On a ten year old ML350 it rarely does, because the engine alone can cost more than the vehicle is worth.

For most OM642 vehicles between eight and fifteen years old, a tested used unit is where the Mercedes OM642 replacement engine cost and the value of the vehicle meet in a sensible place.

Labor and Fitting Time

Labor is a big part of the Mercedes OM642 replacement engine cost, and it changes a lot by model. Rough times we see quoted:

  • E-Class, C-Class and CLS: about 12 to 15 hours
  • ML, GL and R-Class: about 12 to 16 hours
  • S-Class: about 14 to 17 hours
  • Sprinter V6: about 10 to 14 hours
  • Jeep Grand Cherokee 3.0 CRD: about 12 to 15 hours

At $90 to $200 an hour, that is $1,400 to $3,200. A specialist who knows the OM642 will usually beat the book time. Ask for a fixed price if you can.

The fitter will transfer parts from your old engine: wiring, sensors, intake, starter, alternator, air conditioning compressor and in some cases the turbo and injectors. We list what comes with each engine on the quote, so you know exactly what you are paying for.

Extras That Raise the Mercedes OM642 Replacement Engine Cost

These are the line items that turn a clean quote into a bigger invoice. Most of them are good practice. Budget for them from the start.

  • Oil cooler seals: replace them while the engine is out, even on a used unit. It costs little now and a lot later.
  • Injector seals and bolts: new copper washers and hold down bolts on every injector.
  • Water pump and thermostat: especially if the old engine died from heat.
  • Radiator and hoses: if the cooling system caused the failure, fix it or you will repeat it.
  • Intercooler and turbo pipes: must be cleaned if there was a turbo failure.
  • DPF and EGR: check them, clean or replace if needed.
  • Engine and gearbox mounts: old mounts make a good engine feel rough.
  • Coding and adaptations: injector codes and adaptations need a proper diagnostic tool.

Ask your shop to put these on the estimate. Then the Mercedes OM642 replacement engine cost you agree to is the one you actually pay.

Mercedes OM642 Replacement Engine Cost by Model

Rough all-in figures with a tested used engine and an independent workshop:

E350 CDI and BlueTEC

Common and well understood by most shops. Expect a Mercedes OM642 replacement engine cost between $4,500 and $7,000.

ML350, GL350 and R350

Heavier vehicles, more hours, often more worn parts around the engine. Plan on $5,000 to $8,000.

S350 BlueTEC

Tighter packaging and more electronics. The Mercedes OM642 replacement engine cost here is often $5,500 to $8,500.

Sprinter V6

Easier access but the vans often have very high mileage. A typical figure is $4,800 to $7,500 with mounts and cooling parts.

Jeep Grand Cherokee 3.0 CRD

The Jeep version has its own sump, wiring and parts. Matching matters here more than anywhere. Total cost is usually $4,800 to $7,500.

G350 BlueTEC

These hold their value, so owners often spend more and go for a rebuilt engine. The Mercedes OM642 replacement engine cost with a used unit is about $5,500 to $8,000.

Repair or Replace? Signs the OM642 Is Finished

Not every sick OM642 needs a new engine. I would rather tell someone to fix the oil cooler seals than sell them an engine they did not need. Here is how I separate the two.

Usually a repair

  • Oil leaking from the back of the engine, but oil pressure is fine and there is no knock
  • Black carbon around one or two injectors, engine still runs smoothly
  • Swirl flap or actuator fault codes with no misfire
  • EGR or DPF warnings on an engine with good compression

Usually a replacement

  • A deep knock from the bottom end that gets louder under load
  • Metal in the oil or on the sump plug magnet
  • Low compression on one or more cylinders after an overheat
  • Coolant in the oil or oil in the coolant from a cracked block or head
  • A seized engine, or one that turns but will not hold compression

If you are in the second group, a repair can easily cost as much as the full Mercedes OM642 replacement engine cost, and you still end up with a tired engine. A diagnostic hour from a decent shop before you decide is money well spent.

A useful middle check is an oil sample and a compression test. Both are cheap. If the oil shows bearing metal or compression is poor across several cylinders, the repair route is rarely worth it. At that point the Mercedes OM642 replacement engine cost with a tested used unit almost always works out better than opening the old engine.

What Comes With Our OM642 Engines

Every engine is different, because it depends on how the donor vehicle was stripped. We tell you up front what is on the engine you are buying. A typical OM642 from us comes as a long engine with:

  • Cylinder heads, camshafts and timing chains
  • Oil pump, sump and oil cooler housing
  • Intake manifold, often with injectors and fuel rail
  • Turbo on some units, or without if you are keeping your own
  • Ancillaries such as alternator and air conditioning compressor where listed

If you want a complete dropout engine with everything attached, ask. If you only need the long block because your ancillaries are good, that lowers the price. Either way, it is written on the quote so the Mercedes OM642 replacement engine cost is clear before you commit.

Worldwide Shipping and Delivery Times

We ship OM642 engines to workshops and owners all over the world. Engines are drained, sealed, bolted to a pallet or packed in a crate and wrapped for the trip. You get the tracking details as soon as it leaves.

Most orders arrive within one to four weeks of dispatch, depending on the destination and whether you choose sea or air freight. Sea freight to the nearest port is the cheapest way to move an engine of this size, and it can take a few hundred dollars off your Mercedes OM642 replacement engine cost compared with door delivery. Air freight is faster but costs more.

Import duties and local taxes depend on your country. We will help with the paperwork you need, but check your local rules so there are no surprises when the engine lands.

How to Lower Your Mercedes OM642 Replacement Engine Cost

  1. Send the VIN first. It fixes the version, emissions level, sump and wiring.
  2. Buy a tested engine. Ask for compression readings and photos of the engine before it is crated.
  3. Find the cause of the failure. Overheating, oil starvation or a turbo failure all need fixing at the same time.
  4. Choose a specialist over a general garage. OM642 experience saves hours.
  5. Keep good parts. A healthy turbo, alternator or compressor does not need replacing.
  6. Compare freight options. Port collection is often cheaper than door delivery.
  7. Get one written quote. Engine, freight, warranty and what is included, all on one page.

Follow those and your Mercedes OM642 replacement engine cost is far more likely to sit at the lower end of the ranges above.

How We Test Every OM642

  • Compression test on all six cylinders, readings recorded
  • Oil drained and checked for metal, fuel or coolant
  • Coolant checked for oil
  • Visual check of the valley for oil cooler leaks
  • Injector area checked for carbon build up
  • Timing chain noise and tensioner checked
  • Engine turned by hand to feel for tight spots
  • Engine number, mileage and donor vehicle recorded
  • Photos and, on request, video before crating

You see those results before you pay. That openness is what keeps the Mercedes OM642 replacement engine cost honest, because the most expensive engine is the one you have to replace twice.

Is Replacing an OM642 Worth It?

Work out what the vehicle is worth running, then what it is worth with a dead engine. If the gap is bigger than the total Mercedes OM642 replacement engine cost, the swap pays.

A 2013 ML350 BlueTEC that is worth around $14,000 running and $5,000 as a non runner is a clear yes with a $6,500 job. A Sprinter that earns money every day is nearly always a yes too. An old W211 with rust and a worn gearbox needs a harder look.

Real Examples From Recent Orders

Sprinter 319 CDI, removals company: overheated after a split hose on a long run. Used OM642, freight, new radiator, water pump and mounts. The Mercedes OM642 replacement engine cost came to about $6,400.

E350 BlueTEC, private owner: bearing failure after running low on oil from a leaking oil cooler. Engine, oil cooler seals and fitting at an independent shop. About $5,300 in total.

Jeep Grand Cherokee 3.0 CRD: turbo failure that pushed oil into the engine. Engine, turbo and intercooler clean. Around $6,900 all in.

Buying an OM642 From Us

  1. Send your VIN, engine number and country through the contact page.
  2. We match the correct OM642 version and send photos and test results.
  3. You receive a written quote with engine price, freight and warranty.
  4. Payment is by bank transfer. See our billing terms.
  5. We crate and ship the engine. Details are on our shipping policy page.
  6. You get tracking and support until the engine is running.

You can read more about us on the about page.

FAQs

What is the average Mercedes OM642 replacement engine cost?

With a tested used engine and an independent shop, most owners pay between $4,500 and $8,500 in total. A new engine at a dealer can pass $15,000.

Is the OM642 the same engine in a Jeep and a Mercedes?

The core engine is the same family, but the Jeep version has a different sump, wiring and some ancillaries. We match it by VIN.

Should I just fix the oil cooler leak?

If the engine still runs well, yes. Replacement only makes sense when the engine has already been damaged by low oil, overheating or another failure.

Does the Mercedes OM642 replacement engine cost include freight?

We quote engine and freight as separate lines and show the total, so you see the full Mercedes OM642 replacement engine cost before you pay.

Do you ship worldwide?

Yes. We ship to North America, Europe, the Middle East, Africa, Asia and Oceania, either to the nearest port or to your door.

Is there a warranty?

Yes. Every engine has a written warranty, and the terms are on the quote.

Final Word on the Mercedes OM642 Replacement Engine Cost

A failed OM642 does not have to mean the end of a good vehicle. With a tested used engine, a shop that knows the V6 and the original cause fixed, the Mercedes OM642 replacement engine cost is a fraction of buying another vehicle, and you keep the one you know.

Send your VIN through the contact page or call +1 (209) 733-0882. We will match the right engine, send real photos and give you a written price. More guides are on our blog, and the full range is in used engines.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsApp+1 209 690 5983