WhatsApp: +1 209 690 5983

Cummins 6BT engine for sale

Cummins 6BT Engine for Sale: 7 Proven Checks Before You Buy

If you are hunting for a Cummins 6BT engine for sale, you probably already know why people chase this motor. It is the 5.9 litre, 12-valve inline six that went into early Dodge Ram trucks, school buses, step vans, boats, generators and a long list of farm and construction machines. It has no computer, no fancy electronics and very little to go wrong. Owners keep them for decades. Swappers put them in everything from old Ford pickups to Land Cruisers.

We sell this engine. NJ Global Auto Parts has a tested Cummins 6BT engine for sale at $1,700, and we ship it worldwide. You can see the listing on our Cummins 6BT engine product page, or send us your engine serial number or vehicle details and we will confirm the right version and give you a delivered price to your door.

Cummins 6BT engine for sale
Cummins 6BT 5.9 diesel engine for sale, tested and shipped worldwide.

I have been around these engines a long time, and this guide is written the way I would explain it to a customer standing in the yard. It covers the specs, the different versions, what the 6BT came in, the problems to look for, and how to buy one without getting burned. If price is your main question, we also have a separate guide on the Cummins 6BT engine price.

Cummins 6BT Engine for Sale at NJ Global Auto Parts

Here is what you get when you buy from us. Every Cummins 6BT engine for sale on our site is a used, fairly used or rebuilt unit that has been checked before it leaves. We look at compression, oil condition, coolant, blow-by and how it starts and idles. We send photos and a short video if you ask, so you are not buying blind.

Our current asking price is $1,700 for a tested long block or complete engine depending on stock. Freight is quoted separately because it depends on where you are. We ship by sea and air to North America, South America, Europe, Africa, the Middle East, Asia and Oceania. Payment is by bank transfer and you get an invoice and order confirmation by email before anything ships.

If you want something other than a 12-valve, we also stock the later 6.7 Cummins engine, the Cummins QSB and the Cummins ISL. The full range sits under our Cummins engines category.

Cummins 6BT Specifications

Before you look at any Cummins 6BT engine for sale, get the basic numbers in your head. They help you spot a seller who does not know what he has.

SpecificationCummins 6BT 5.9
LayoutInline 6 cylinder, 4 stroke diesel
Displacement5.9 litres (359 cubic inches)
Bore x stroke102 mm x 120 mm (4.02 in x 4.72 in)
Valves12 valves, 2 per cylinder, pushrod (OHV)
Block and headCast iron block, cast iron one-piece head
Compression ratioAbout 17.5:1 (varies slightly by year)
AspirationTurbocharged (Holset), aftercooled on 6BTA
Fuel systemMechanical, Bosch VE rotary pump or Bosch P7100 inline pump
Firing order1-5-3-6-2-4
PowerAbout 160 to 215 hp in pickups, up to 230 hp+ in industrial and marine trims
TorqueAbout 400 to 440 lb-ft in pickups
Dry weightRoughly 1,100 lb (around 500 kg)
Oil capacityAbout 11 to 12 US quarts with filter
Valve lashIntake 0.010 in, exhaust 0.020 in

The engine was built as part of the Cummins B Series family. If you want the factory side of the story, the B Series history is worth a read, and Cummins still supports parts for many B engines today.

The Different 6BT Versions

People say “6BT” like it is one engine. It is really a family, and the letters matter when you buy. When you see a Cummins 6BT engine for sale, check which of these it is.

6BT 5.9

The basic turbocharged engine. No aftercooler. You find it in older trucks, buses, gensets and a lot of industrial gear. Simple and very tough.

6BTA 5.9

Same engine with an aftercooler, which cools the air coming out of the turbo. That lets it make more power safely. Common in marine use, bigger generators and machines that work hard all day.

6BTAA 5.9

Air-to-air aftercooled. Used in some trucks and buses that run a charge air cooler up front, like a radiator for the intake air.

6BT in the Dodge Ram, 1989 to 1993

These early Ram engines use the Bosch VE rotary injection pump. Around 160 hp and 400 lb-ft. Very easy to live with, a bit lazy in stock form.

6BT in the Dodge Ram, 1994 to 1998

These use the Bosch P7100 inline pump, which is the one people love for power upgrades. Output went up to around 215 hp and 440 lb-ft on later manual trucks. If a swapper is looking for a Cummins 6BT engine for sale, the P7100 engine is usually what they want.

The 24-valve 5.9 that came after 1998 is a different engine with a different head and an electronic pump. It is a good motor, but it is not a 12-valve 6BT, so do not let anyone sell it to you as one.

What the 6BT Was Fitted To

This is part of why there is always a Cummins 6BT engine for sale somewhere in the world. Cummins put it in a huge range of equipment:

  • Dodge Ram 2500 and 3500 pickups, 1989 to 1998
  • School buses and transit buses
  • Freightliner, Workhorse and other step vans and delivery trucks
  • Medium duty trucks from several brands
  • Excavators, wheel loaders and backhoes from Komatsu, Case, Hyundai and others
  • Generator sets, water pumps and compressors
  • Marine boats as the 6BTA 5.9-M
  • Tractors and combine harvesters

Because the core engine is so similar across all these uses, a good used engine from one application can often be made to fit another. The catch is the bolt-on parts. More on that below.

Why Buyers Still Want a Cummins 6BT Engine for Sale

You would think an engine that came out in the 1980s would be forgotten by now. The opposite happened. Here is why people keep asking us for a Cummins 6BT engine for sale.

No electronics to fail. The 12-valve runs on a mechanical pump. If it has fuel, air and compression, it runs. That matters a lot in places where you cannot get a scan tool or a dealer.

Strong bottom end. The block, crank and rods are heavy for the power they make. A lot of these engines pass 300,000 miles or 15,000 hours before they need a full rebuild.

Parts are everywhere. Filters, gaskets, injectors, pumps and rebuild kits are sold all over the world. You are not stuck waiting months for something odd.

Good fuel economy. For a six cylinder diesel that pulls hard, it is easy on fuel. Swapped into a light truck it often does far better than the petrol engine it replaced.

Easy to upgrade. The P7100 pump, the Holset turbo and the simple head make it easy to add power with fuel plates, injectors and turbo changes. That is a big reason why so many swappers look for a Cummins 6BT engine for sale instead of something newer.

Common 6BT Problems to Check Before You Buy

No engine is perfect. These are the things I check on every 6BT, and you should ask about them too.

The dowel pin

Many 12-valve engines have a small dowel pin in the timing case that can work loose and fall into the gear train. People call it the “killer dowel pin”. If it drops, it can wreck the timing gears and the front cover. The fix is cheap: a tab that holds the pin in place. Ask if it has been done. If not, plan to do it.

Lift pump

The mechanical lift pump on some engines gets weak with age. Low fuel pressure means poor power and hard starting. It is not a big job, but it is good to know.

Head gasket on tuned engines

Stock engines are very easy on head gaskets. Engines that have been turned up hard with big fuel and boost can push a gasket. Look for coolant loss or white smoke and ask about the history.

Front crank seal and oil leaks

Old seals weep. It is not a reason to walk away, but count the cost of new seals into your budget.

Cracked blocks

A small number of blocks from the late 1990s are known to crack. It is not common, but a careful look along the side of the block when you get photos is worth it.

We check for all of this before we list a Cummins 6BT engine for sale. If we find something, we tell you. If an engine is not good enough to sell, it does not go on the site.

How to Match the Right 6BT to Your Vehicle

This is the part that saves you the most money. The long block on most 6BTs is very similar, but the outside parts change a lot from one machine to the next.

  • Engine serial number (ESN). It is on a tag on the side of the engine, usually on the gear housing. Send it to us. It tells us the exact build.
  • CPL number. The Control Parts List number tells you what parts the engine was built with. Very useful when matching pumps and turbos.
  • Oil pan and pickup. Front sump, rear sump and center sump all exist. Make sure it clears your axle or frame.
  • Bell housing and flywheel. SAE sizes vary between trucks, buses and machines.
  • Injection pump. VE or P7100, and the governor setting. A genset pump runs at a fixed speed and is not right for a road vehicle without changes.
  • Turbo and exhaust outlet. The turbo position and outlet angle change by application.
  • Alternator, A/C and power steering brackets. These are the small bits that cost time if they do not match.

Send us your details through our contact page and we will match it for you. That is free and it avoids most of the problems people run into.

Used, Rebuilt or Remanufactured

When you look at a Cummins 6BT engine for sale you will see three words a lot. They do not mean the same thing.

Used means the engine came out of a running vehicle or machine and was tested. It is the cheapest way to get going and, with a good engine, often the best value.

Rebuilt means someone opened it up and replaced worn parts like bearings, rings and gaskets. Quality depends on who did the work.

Remanufactured means it was taken down fully and brought back to factory spec. It costs more. We wrote a longer piece on remanufactured vs rebuilt engines if you want the detail.

For most buyers, a good tested used engine at $1,700 makes more sense than paying three or four times that for a reman, as long as you check it properly.

How We Test a Cummins 6BT Engine for Sale

Here is what happens before an engine is offered to you:

  1. We check the oil for fuel, coolant or metal.
  2. We check coolant for oil or combustion gas.
  3. We do a compression check on all six cylinders.
  4. We look at blow-by at the breather.
  5. We start it, listen for knocks and check smoke at idle and under load where possible.
  6. We look at the dowel pin, seals and block for cracks.
  7. We take photos and video for the buyer.

Then we drain fluids, cap the openings and pack it for shipping. You get the tracking and documents once it leaves.

Shipping a 6BT Worldwide

A 6BT is heavy, so freight is a real part of the cost. A long block goes on a pallet. A complete engine with accessories goes in a crate. Sea freight is cheaper and slower. Air freight is fast and costs more.

We ship to buyers in the United States, Canada, Mexico, Brazil, Chile, the UK, Germany, Nigeria, Kenya, Ghana, South Africa, the UAE, Saudi Arabia, the Philippines, Australia, New Zealand and many more. You can read the details in our shipping policy. If you need port pickup or door delivery, tell us when you ask for a quote.

Installing Your 6BT the Right Way

A good engine can still fail early if it goes into a dirty or tired system. When your Cummins 6BT engine for sale arrives, do these things before you start it:

  • Flush or replace the radiator. Old radiators clogged with scale cook engines.
  • Fit new hoses, belts and a new thermostat.
  • Clean or replace the intercooler and intake pipes on aftercooled engines. Any dirt in there goes straight into the cylinders.
  • Fit new fuel filters and bleed the fuel system properly.
  • Prime the oil system before the first start.
  • Check valve lash and set it if needed.
  • Fit a new air filter.
  • Do the dowel pin fix if it has not been done.

Take it easy for the first few hours. Change the oil early, then go back to your normal service plan.

Swapping a 6BT Into Another Vehicle

A lot of people who ask about a Cummins 6BT engine for sale are planning a swap. Toyota Land Cruisers, Ford F-series, Chevy trucks, Jeeps and even old fire trucks all get 6BT swaps. A few plain tips from experience:

  • Measure first. The 6BT is long and tall. Check hood clearance and the firewall.
  • Pick the right gearbox adapter before you buy the engine, so you know which flywheel housing you need.
  • Upgrade the cooling. Most petrol engine radiators are too small.
  • Budget for motor mounts, exhaust, fuel lines and wiring for the shutoff solenoid.
  • The P7100 engine is the easier choice if you want more power later.

If you tell us what you are swapping it into, we can usually point you to the right sump, housing and pump setup.

How the 6BT Compares to Other Engines We Sell

Sometimes a buyer is better off with something else. Here is a quick honest view:

  • 6BT vs 6.7 Cummins. The 6.7 makes far more power and is cleaner on emissions, but it has more electronics and costs much more. See our used 6.7 Cummins engine price guide.
  • 6BT vs QSB. The QSB is the electronic, common-rail cousin used in newer machines. Better emissions, more sensors.
  • 6BT vs Isuzu 6HK1. The Isuzu 6HK1 is a bigger 7.8 litre engine common in excavators and Isuzu trucks. Different mounts and parts, so not a direct swap.

If you are fixing a machine that already had a 6BT, stick with a 6BT. It is the easiest and cheapest route.

What Affects the Price of a Cummins 6BT Engine for Sale

Two engines that look the same in photos can be priced very differently. Here is what moves the number up or down when you shop for a Cummins 6BT engine for sale:

  • Complete engine or long block. A complete engine comes with the pump, turbo, manifolds and often the starter and alternator. A long block is the bare engine. Complete costs more but saves you hunting for parts.
  • VE pump or P7100 pump. P7100 engines usually sell for more because of their power potential.
  • Hours or miles. Lower use, higher price. Ask for proof where you can.
  • Condition of injectors and turbo. Worn injectors and a tired turbo add to your bill after you buy.
  • Freight to your country. Often the biggest surprise. Get the delivered figure, not just the engine price.

A cheap Cummins 6BT engine for sale with no history, no photos and no test is not cheap if it fails in a month. Pay for a checked engine and keep the rest of your money for the install.

Who Buys a Cummins 6BT Engine for Sale From Us

Our buyers are a mixed crowd. Truck owners keeping an old Ram on the road. Bus and fleet operators who want to put a vehicle back to work without buying new. Farmers with tractors and pumps. Boat owners with a tired 6BTA. Generator rental companies. Builders doing a diesel swap in a weekend project truck. They all want the same thing: a Cummins 6BT engine for sale that runs right, arrives on time and is priced fairly. That is what we try to give every one of them.

How to Order

Buying from us is simple:

  1. Send us your engine serial number, vehicle or machine model, and your country through our contact page.
  2. We confirm the right Cummins 6BT engine for sale and send the price with freight.
  3. We send photos and video of the actual engine.
  4. You pay by bank transfer and receive your invoice and order confirmation by email.
  5. We pack and ship, then send tracking and shipping papers.

You can also call +1 (209) 733-0882 or email info@njglobalautoparts.com. Our refund and returns policy is on the site so you know where you stand before you pay.

Frequently Asked Questions

Is a used Cummins 6BT engine for sale a good buy for a farm or boat?

Yes, if it is tested and matched to your machine. A checked Cummins 6BT engine for sale is one of the cheapest ways to get a tractor, pump or boat working again.

Can I see the actual Cummins 6BT engine for sale before I pay?

Yes. We send photos and a running video of the exact Cummins 6BT engine for sale you are buying, not stock pictures.

Do you have more than one Cummins 6BT engine for sale?

Stock changes, but we usually have several. Tell us what you need and we will match the best Cummins 6BT engine for sale we have that week.

How much is your Cummins 6BT engine for sale?

Our tested 6BT is $1,700. Freight is added based on your country, and we confirm the total in writing before you pay.

Is the 6BT the same as the 12-valve Cummins?

Yes. The 6BT 5.9 is the 12-valve engine. The 24-valve 5.9 that came later is a different engine.

Will a 6BT from a bus or generator fit my Dodge Ram?

The long block is close, but the pump, sump, bell housing and brackets can be different. Send us both sets of details and we will tell you what needs swapping.

How long does a 6BT last?

With clean oil, clean air and a good cooling system, many run 300,000 miles or more before a rebuild. Industrial engines often pass 15,000 hours.

Do you ship worldwide?

Yes. We ship by sea and air to buyers around the world.

Can I add power to a 6BT?

Yes, especially the P7100 versions. Injectors, pump tuning and a turbo change are common. Keep it sensible and watch exhaust temperature.

How do I pay?

By bank transfer. You get an invoice and an order confirmation by email.

Final Word on Buying a Cummins 6BT Engine for Sale

The 6BT has earned its name the hard way, in trucks, buses, boats and machines that work every day. A good one will outlast most of the vehicle it goes into. The trick is buying the right version, checking the condition and fitting it into a clean system.

Match the serial number, check the dowel pin, look at the oil and coolant, sort out your cooling before install and get the delivered price in writing. Do that and you will be happy with your engine for a long time.

When you are ready, see our Cummins 6BT engine for sale or browse the full shop. Send us your details and we will get you a straight price with shipping to your door.

Chat on WhatsApp+1 209 690 5983