This Chevrolet 396 Big Block V8 6.5L is for sale fairly used, checked and ready to ship worldwide. The 396 is the engine behind the SS 396 badge on Chevelles, Camaros and Novas, and the first big block in the Corvette. If you’ve got one of those cars and the original engine is gone or worn out, a 396 is the right way to bring it back.
Prices go from $4,800 for a long block to $9,500 for a complete engine. A 325 hp engine costs less than a 350 hp L34, and an L78 or aluminum head L89 sits at the very top. Tell us the car and the version you want and we’ll quote the right Chevrolet 396 Big Block V8 6.5L with shipping.

Table of Contents
What You Get With the Chevrolet 396 Big Block V8 6.5L
- Long block, from $4,800: block, crank, rods, pistons, cam, heads, valvetrain, timing set, oil pan, timing cover and valve covers.
- Complete engine, up to $9,500: the long block plus intake, 4 barrel carburetor, distributor and exhaust manifolds, with water pump and brackets where available.
Before you pay, you get photos, a video of the engine turning, the casting number, the stamp and date codes. For a restoration, those details matter, so ask for any close ups you need.
Chevrolet 396 Big Block V8 6.5L Specifications
| Engine family | Chevrolet big block, Mark IV |
| Displacement | 396 cu in (6.5 L, 6,489 cc) |
| Layout | 90 degree V8, overhead valves, canted valve heads |
| Bore x stroke | 4.094 x 3.76 in (104 x 95.5 mm) |
| Block and heads | Cast iron (aluminum heads on the L89) |
| Firing order | 1-8-4-3-6-5-7-2 |
| Power | 265 to 425 hp (gross) depending on version |
| Torque | About 400 to 415 lb-ft |
| Compression | About 10.25:1 to 11.0:1 |
| Fuel system | 4 barrel carburetor (Rochester Quadrajet or Holley) |
| Years built | 1965 to 1969, with the 402 sold as an SS 396 from 1970 |
The 396 Versions
- L35, 325 hp: the most common one, hydraulic cam, found in most Chevelle SS 396 and Camaro SS cars.
- L34, 350 hp: a stronger hydraulic cam engine.
- L78, 375 hp: solid lifters, high compression and rectangular port heads. The serious one.
- L89, 375 hp: the L78 with aluminum heads, very rare.
- 1965 Corvette L78, 425 hp: the first big block Corvette, one year only.
- 265 hp versions: lower output engines for full size cars and trucks.
In 1970 Chevy bored the engine out to 402 cubic inches but kept the SS 396 name on the Chevelle and Camaro. If your car says SS 396 and it’s a 1970 or later, the original was probably a 402. We can supply either.
Cars That Used the 396
- Chevrolet Chevelle SS 396, 1965 (Z16) to 1970
- Chevrolet Camaro SS 396, 1967 to 1972 (402 from 1970)
- Chevrolet Nova SS 396, 1968 to 1970
- Chevrolet Corvette, 1965
- Chevrolet Impala SS, Caprice, Bel Air and Biscayne, 1965 to 1969
- Chevrolet El Camino SS 396, 1968 to 1970
- Chevrolet C10 and C20 pickups, late 1960s
That covers most of the muscle cars people want today. The Chevrolet 396 Big Block V8 6.5L is what turned a family Chevelle into a street racer.
Why Buy a 396 Today?
Mostly for originality. A Chevelle SS or Camaro SS with a correct 396 is worth more and drives the way it should. The 396 also revs a little more freely than a 454 thanks to its shorter stroke, and many people prefer how it feels. It’s a strong engine in its own right, but it’s the badge that makes it hard to replace with anything else.
How We Check Every Chevrolet 396 Big Block V8 6.5L
- Compression test on every cylinder
- Oil drained and checked for metal or water
- Engine turned by hand to listen for knocks
- Block and heads checked for cracks
- Casting numbers, date codes and stamp confirmed
- Photos and video before packing
What to Watch on an Old 396
- Many have been bored over once or twice. Ask for the bore size if it matters to you.
- Solid lifter engines need the valve lash set correctly.
- Flat tappet cams need oil with zinc.
- Heads are sometimes swapped from other big blocks. We check the casting numbers and tell you.
Chevrolet 396 Big Block V8 6.5L Price Range
| Long block | From $4,800 |
| Complete engine | Up to $9,500 |
L78 and L89 engines, and engines with date codes that match your car, cost the most. Freight is quoted separately depending on your country and shipping method. You get the full total before you pay.
Shipping and Payment
We ship the Chevrolet 396 Big Block V8 6.5L to most countries. It’s drained, capped, bolted to a pallet and wrapped, with tracking and customs papers. Payment is by bank transfer, with an invoice and order confirmation by email. Read our shipping policy, billing terms and refund and returns policy.
Fitting Tips
- Prime the oil system before the first start.
- Run oil with zinc for the flat tappet cam.
- The 396 is internally balanced, unlike the 454, so use the matching flexplate and balancer.
- Check the radiator. A big block needs good cooling.
- On solid lifter engines, set the valve lash hot after it’s run.
How to Tell a Real 396
From the outside the 396, 402, 427 and 454 look almost the same. They’re all Mark IV big blocks. To tell them apart you need the numbers:
- The block casting number on the back of the block, driver’s side, next to the bellhousing
- The casting date beside it
- The stamp pad at the front of the block, with the assembly date and a suffix code that identifies the exact engine
- The head casting numbers, which tell you oval port or rectangular port heads
We photograph all of them for every Chevrolet 396 Big Block V8 6.5L we sell. If you’re paying more for an L78, you should see the proof, and you will.
Chevrolet 396 Big Block V8 6.5L for Restorations
If you’re bringing an SS 396 back to how it left the factory, the right engine is half the job. Judges and buyers look at the block date, which should fall a little before the car’s build date, the suffix code on the pad, and the heads. A correct Chevrolet 396 Big Block V8 6.5L can add a lot to what the car is worth.
If you just want to drive it, don’t pay extra for codes. A healthy 396 or 402 gives you the same feel for less money.
396, 402 or 454?
- 396: the original. Shorter stroke, revs freely, and correct for 1965 to 1969 cars.
- 402: a slightly bigger bore, used from 1970 and still badged 396. Almost the same to drive.
- 454: longer stroke and more torque. A popular upgrade, but it’s externally balanced and needs its own flexplate and balancer. See our 454 big block.
Gearboxes for the 396
Factory 396 cars came with a Powerglide, Turbo 400, three speed manual or Muncie four speed. Today most people run a TH400 or a Muncie, or go to a five or six speed manual or a 4L80E for highway driving. If your gearbox is tired too, have a look at our used transmissions.
What It’s Like to Drive
A good Chevrolet 396 Big Block V8 6.5L pulls hard from low revs and keeps pulling. The L35 is smooth and easy to live with. The L78 is lumpier at idle because of its solid lifter cam, and it likes revs. Either way it sounds the way a 1960s muscle car should, and that’s a big part of why people still want one.
Looking After It
Change the oil often and use oil with zinc. Keep the cooling system in good shape, because big blocks run warm in traffic. On solid lifter engines, check the valve lash every few thousand miles. Store the car properly over winter. Simple care keeps these engines going for years.
Who We Sell 396s To
Most of our 396 buyers are restoring a Chevelle, Camaro or Nova that lost its original engine years ago, usually swapped out for a tired small block along the way. Some are building a clone of an SS car they always wanted. A few are collectors who need a date correct engine to finish a car for show. Whatever the reason, the process is the same. You tell us the car and the version, we find an engine, send the numbers and photos, and you decide. No pressure and no surprises on the price.
Related Engines
- Chevrolet 454 Big Block V8 7.4L
- Chevrolet LS6 454 V8 7.4L
- Chevrolet 327 Small Block V8 5.4L
- Chevrolet 350 Small Block V8 5.7L
- Chrysler Hemi engine
See the used Chevy engines guide, or browse American car engines and Chevy engines. The Chevrolet big-block engine article has the full history, and the first generation Camaro article covers the SS 396 cars.
Frequently Asked Questions
Can a Chevrolet 396 Big Block V8 6.5L replace a 402 or 427?
Yes. They all share mounts, the bellhousing pattern and most external parts.
Is a 1970 SS 396 really a 402?
Yes. The engine grew to 402 cubic inches but kept the 396 badge.
Can you find a specific version like the L78?
Often, yes. Tell us what you need and we’ll search our stock and suppliers.
Do you ship worldwide?
Yes, by sea or air freight.
How do I pay?
By bank transfer. Call +1 (209) 733-0882 with questions.
Order Your Chevrolet 396 Big Block V8 6.5L
Contact us with your car, the version you want and your country. We’ll match a Chevrolet 396 Big Block V8 6.5L and send a price with freight. More about us here.





Reviews
There are no reviews yet.